SINGCALL E57 Wireless SOS Emergency Call Button

1. Bubuka

The SINGCALL E57 is a wireless SOS emergency call button designed to function as a transmitter within a caregiver pager system. This device is intended to be used in conjunction with a compatible SINGCALL receiver (not included) to create a complete call system. It provides a simple and effective way for individuals needing assistance, such as the elderly, patients, or those with disabilities, to alert a caregiver.

Catetan penting: The E57 call button cannot be used as a standalone device. A SINGCALL receiver is required for the system to function.

2. Produk Langkungview

The E57 call button features a large, easily identifiable button for quick activation. Its compact and durable design ensures reliability in various environments.

Gambar 2.1: Hareupeun view of the SINGCALL E57 Wireless SOS Emergency Call Button.

Fitur konci:

• Ukuran kompak: Approximately 5.5 x 5.5 cm (2.2 x 2.2 inches).
• Desain waterproof: IP55 rated, offering protection against dust and low-pressure water jets.
• Suhu Operasi Lebar: Functions reliably between -20℃ to 50℃ (-4℉ to 122℉).
• Jangkauan Transmisi Panjang: Nepi ka 150 méter (500 kaki) di daérah kabuka.
• Portabel: Can be carried in a pocket, worn around the neck with a lanyard, or mounted on a wall.

Figure 2.2: Dimensions of the SINGCALL E57 Call Button.

Figure 2.3: The E57 button demonstrating its IP55 waterproof rating and operating temperature range.

3. Setélan

3.1 Pamasangan batré

The E57 call button is powered by two CR2 batteries, which are typically included. To install or replace batteries:

1. Carefully open the back cover of the call button.
2. Insert the two CR2 batteries, ensuring correct polarity (+/-).
3. Tutup panutup tukang kalawan aman.

3.2 Pairing with a SINGCALL Receiver

The E57 call button must be paired with a compatible SINGCALL receiver to function. The pairing process typically involves placing the receiver into a pairing mode and then activating the call button.

General Pairing Steps (refer to your receiver's manual for specific instructions):

1. Ensure your SINGCALL receiver is powered on and in close proximity to the E57 button.
2. Activate the pairing mode on your SINGCALL receiver. This usually involves pressing a specific button on the receiver for a few seconds until an indicator light or sound confirms pairing mode.
3. While the receiver is in pairing mode, press the large "CALL" button on the E57 transmitter.
4. The receiver should indicate successful pairing (e.g., a beep, flash, or display update).
5. Test the connection by pressing the E57 button again to ensure the receiver responds.

3.3 Pamasangan sareng Penempatan

The E57 button offers flexible placement options:

• Pamakéan portabel: Attach a lanyard (if provided) to wear it around the neck, or simply carry it in a pocket.
• Pamasangan témbok: The button can be affixed to a wall using adhesive or screws (not included) for fixed locations like bathrooms or beside a bed. Ensure it is placed within the transmission range of the receiver.

Gambar 3.1: Kelample of the E57 button being worn for easy access.

4. Parentah Operasi

Once the E57 call button is paired with a SINGCALL receiver, operation is straightforward:

1. To send an alert, simply press the large "CALL" button firmly.
2. The button will transmit a wireless signal to the paired receiver.
3. The receiver will then activate its alert mechanism (e.g., sound, vibration, light) to notify the caregiver.

Ensure the button is within the effective transmission range of the receiver for reliable operation. Obstacles such as thick walls or electronic interference can reduce the effective range.

Figure 4.1: Illustration of the wireless range of the E57 button within a typical home environment.

5. Pangropéa

5.1 Ngagantian batré

When the call button's signal weakens or if it stops responding, it may be time to replace the batteries. Follow the battery installation steps in Section 3.1.

• Use only CR2 type batteries.
• Buang batré heubeul kalawan tanggung jawab nurutkeun peraturan lokal.

5.2 beberesih

To clean the E57 call button, wipe it with a soft, slightly damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the device's surface or internal components.

5.3 Tahan cai

The E57 is IP55 rated, meaning it is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for use in environments where it might be exposed to splashes, such as a bathroom. However, it is henteu dirancang pikeun dicelupkeun kana cai.

6. Cara ngungkulan

• Tombol teu ngabales:
  • Check the batteries. Replace them if necessary.
  • Ensure the button is within range of the receiver.
• Receiver not receiving signal:
  • Verify that the E57 button is properly paired with the receiver (refer to Section 3.2 and your receiver's manual).
  • Check the distance between the button and the receiver. Move them closer if possible.
  • Ensure there are no significant obstructions (e.g., thick concrete walls, large metal objects) between the button and the receiver.
  • Check if the receiver is powered on and functioning correctly.
• gangguan:
  • If experiencing intermittent signals, try relocating the receiver or the button to avoid potential sources of wireless interference (e.g., Wi-Fi routers, cordless phones, microwaves).

For persistent issues, consult the user manual of your specific SINGCALL receiver or contact SINGCALL customer support.

7. Spésifikasi

Gambar 7.1: Balik view of the E57 button with model and regulatory information.

8. Garansi jeung Rojongan

SINGCALL provides spare parts availability for 5 years within the EU for this product. For warranty claims, technical support, or further assistance, please contact SINGCALL customer service through their official websitus atanapi pangecér dimana produkna dibeuli.

Punten nahan bukti pameseran anjeun pikeun patarosan anu aya hubunganana sareng garansi.