Elitech ECB-3000 Electric Control Box User Manual

Bubuka

The Elitech ECB-3000 is an integrated electrical control box specifically designed for temperature management in cold rooms, seafood machines, and chillers. It provides precise control over cooling, defrosting, fan operation, and lighting. Constructed with an ABS flame-retardant material shell, it offers good waterproofing, a durable design, and stable, reliable performance. This manual provides essential information for the safe and effective operation of your ECB-3000 control box.

Émbaran Kasalametan

Please read all safety warnings and instructions carefully before installation and operation to prevent injury or damage.

• Ensure the power supply matches the specifications (220V) of the ECB-3000 before connecting.
• All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes.
• Do not operate the device with wet hands or in excessively humid environments.
• Do not open the control box unless power is disconnected. There are no user-serviceable parts inside.
• Keep the device away from direct sunlight, heat sources, and corrosive substances.
• Pastikeun grounding ditangtoskeun pikeun nyegah shock listrik.

Produk Leuwihview

The Elitech ECB-3000 features a user-friendly interface with a digital display and intuitive buttons for setting parameters. It integrates multiple control functions into a single robust unit.

Gambar 1: Hareupeun view of the Elitech ECB-3000 Electric Control Box, showing the main display and control buttons.

angka 2: Tutup-up view of the ECB-3000's digital display, 'SET' button, 'Cool' and 'Defrost' indicators, and 'Start/Stop' buttons.

Gambar 3: Angled view of the ECB-3000, highlighting its compact and robust design suitable for various installations.

Disetél

Follow these steps for proper installation of the ECB-3000 control box:

1. Pamasangan: Choose a suitable location for mounting the control box, ensuring it is protected from direct water spray and excessive vibration. Use appropriate fasteners to secure the box to a stable surface.
2. Wiring: Carefully connect the power supply (220V), temperature sensors, compressor, defrost heater, fan, and light according to the wiring diagram provided with your unit. Ensure all connections are secure and insulated.
3. Panempatan sénsor: Install the temperature sensor(s) in the desired location within the cold room or chiller to accurately measure the ambient temperature.
4. Power-Up mimiti: Once all connections are verified, apply power to the unit. The digital display should illuminate.

Parentah Operasi

Operasi Dasar

• Hurungkeun/Pareuman: Use the 'Start' (green) and 'Stop' (red) buttons on the front panel to turn the control box functions on or off.
• tampilan: The main digital display shows the current temperature measured by the sensor.

Kontrol Suhu

The ECB-3000 supports both refrigeration and heating conversion functions. Parameters can be continuously modified during operation.

• Nyetel Suhu: Press the 'SET' button to enter the temperature setting mode. Use the Up/Down arrow buttons to adjust the desired temperature setpoint. Press 'SET' again to confirm.
• Diferensial Suhu: The unit adopts a temperature differential control method. This means the compressor will turn on when the temperature rises above the setpoint plus the differential, and turn off when it drops below the setpoint. Refer to the detailed parameter settings in the full technical manual for adjusting the differential.

Fungsi Defrost

The control box manages automatic defrost cycles to prevent ice buildup on the evaporator.

• Indikator Defrost: The 'Defrost' indicator light will illuminate when the defrost cycle is active.
• Defrost Parameters: Defrost frequency, duration, and termination temperature can be configured through the manager menu. Consult the full technical manual for access and adjustment of these advanced parameters.

Kipas sareng Kontrol Lampu

• Operasi Kipas: The fan operation is typically linked to the compressor cycle or can be independently controlled based on configured parameters.
• Kontrol cahaya: The light output can be manually switched or configured to operate automatically based on door switches or other inputs, depending on the wiring and parameter settings.

Pangropéa

Regular maintenance ensures the longevity and optimal performance of your ECB-3000 control box.

• beberesih: Periodically wipe the exterior of the control box with a soft, damp lawon. Ulah nganggo pembersih atanapi pangleyur anu abrasif. Pastikeun unitna dipareuman sateuacan dibersihkeun.
• Pariksa sambungan: Annually, or as needed, inspect all electrical connections for tightness and signs of corrosion. Ensure power is disconnected before performing this check.
• Inspeksi sénsor: Verify that temperature sensors are clean and properly positioned.
• Ventilasi: Ensure that the control box is not obstructed and has adequate ventilation to prevent overheating.

Pamérésan masalah

This section addresses common issues you might encounter with the ECB-3000.

For issues not listed here or if problems persist, please contact Elitech customer support.

spésifikasi

Garansi sareng Rojongan

For warranty information and technical support, please contact Elitech Technology, Inc. directly. Details regarding specific warranty periods and terms are typically provided with the product packaging or can be obtained from the manufacturer's official websitus.

Please retain your proof of purchase for any warranty claims. For returns, a 15-day refund/replacement policy may apply, subject to the seller's terms and conditions.

Elitech Téhnologi, Nyarita.
For contact information, please visit the official Elitech websitus atanapi tingal dokuméntasi anu kalebet sareng produk anjeun.