Bubuka
Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.
Naon dina Box
Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:
- LED Strip Light (5 meters) x 1
- DC12V Power Adapter x 1
- Connection Receiver x 1
- Jauh Jauh x 1
- Instruction Manual (Japanese) x 1
Émbaran Kasalametan
- Produk ieu dirancang pikeun pamakéan indoor wungkulUlah kakeunaan cai atanapi kalembaban anu luhur.
- Pastikeun catu daya dipegatkeun samemeh dipasang atawa diropéa.
- Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
- Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit.
- Jauhkeun tina jangkauan barudak.
- If any part of the product is damaged, discontinue use immediately and contact support.
Disetél
Follow these steps for proper installation of your LED strip light:
- Nyiapkeun permukaan: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
- Ukur sareng Potong (Opsional): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. Catetan: Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
- Apply the Strip: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Sambungkeun komponén: Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
- Daya Hurung: Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
Parentah Operasi
The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.
Fungsi Remote Control:
- Hurungkeun/Pareuman: Pencét éta tombol kakuatan beureum to turn the lights on or off.
- Penyesuaian Caang: Ngagunakeun éta luhur jeung ka handap tombol panah (labeled 'Brightness Adjust') to increase or decrease the light intensity.
- Pilihan Warna: Milih ti 20 warna prasetél by pressing the corresponding color buttons.
- Modeu DIY: The DIY1-DIY6 buttons allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
- Modeu dinamis:
- CEPAT/LEUN: Atur kecepatan modeu dinamis.
- Otomatis: Cycles through all dynamic modes automatically.
- FLASH: Flashes through colors.
- JUMP3 / JUMP7: Jumps between 3 or 7 colors.
- Luntur 3 / Luntur 7: Fades between 3 or 7 colors.
Pangropéa
- beberesih: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Panyimpenan: If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
- Perawatan napel: The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Strip LED teu hurung. | 1. Power adapter not plugged in. 2. Remote control insulation sheet not removed. 3. Connections are loose or incorrect. 4. Remote control battery is dead. | 1. Ensure power adapter is securely plugged into an outlet. 2. Remove the clear plastic insulation sheet from the remote control battery compartment. 3. Check all connections, ensuring arrows align between the strip and receiver. 4. Replace the remote control battery (CR2025 or equivalent). |
| Kadali jauh teu ngabales. | 1. Remote not pointed at receiver. 2. Obstruction between remote and receiver. 3. Remote control battery is dead. | 1. Point the remote directly at the receiver. 2. Remove any objects blocking the line of sight. 3. Ganti batré kadali jauh. |
| Some sections of the strip are not lighting up. | 1. Damage to the LED strip. 2. Incorrect cutting. | 1. Inspect the strip for physical damage. If damaged, contact support. 2. Ensure cuts were made only at designated marks. |
spésifikasi
- Jumlah modél: PR410082-RGB-JP
- merek: Lepro
- Jenis Sumber Cahaya: LED (SMD5050)
- Jumlah LED: 150 LEDs (30 LEDs per meter)
- Panjang strip: 5 méter
- Konsumsi Daya: 18W
- Masukan Voltage: DC12V 1.5A
- Pilihan Warna: RGB (20 preset colors + DIY modes)
- Métode kontrol: 44-key IR Remote Control
- Pamakéan Indoor/Outdoor: jero rohangan
- Fitur husus: Dimmable, Cuttable, 3M Adhesive, PSE Certified
- Ukuran Paket: 13.1 x 10.7 x 6.7 cm; 230 g
Garansi sareng Rojongan
This Lepro LED Strip Light comes with a garansi 2 taun. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.
For further assistance, you can visit the official Lepro store on Amazon: Lepro Amazon Store
