XTOOL TP150 TPMS Diajar deui Manual Pamaké Alat

1. Bubuka

The XTOOL TP150 is a professional Tire Pressure Monitoring System (TPMS) tool designed for comprehensive TPMS service. It supports activation, relearning, programming of XTOOL sensors, and diagnostic functions for TPMS systems. This manual provides detailed instructions for the proper use and maintenance of your TP150 device.

2. Émbaran Kasalametan

Always observe the following safety precautions when operating the TP150 tool:

• Baca sagala parentah taliti saméméh pamakéan.
• Do not operate the tool in wet conditions or near flammable liquids/gases.
• Ensure the vehicle's ignition is off before connecting or disconnecting the OBDII cable.
• Use only the accessories and parts specified by XTOOL.
• Jauhkeun alat ti barudak.
• Properly dispose of old TPMS sensors and batteries according to local regulations.

3. Produk Langkungview

The XTOOL TP150 TPMS tool is a handheld device equipped with a user-friendly interface. It comes with two 315/433MHz dual-frequency sensors for programming.

Image: The XTOOL TP150 device, two XTOOL TPMS sensors, and their protective yellow carrying case.

3.1. Fitur konci

• TPMS Activation: Activates all known OE and aftermarket TPMS sensors.
• Diajar deui TPMS: Supports OBD Relearn and Static Relearn for all sensors.
• TPMS Programming: Programs XTOOL 315/433MHz sensors with four methods: Automatic ID Generation, Manual ID Entry, Copy ID by Activating, and Read ECU Copy ID.
• TPMS Diagnosis: Reads and clears TPMS Diagnostic Trouble Codes (DTCs), resets TPMS warning light.
• Témbongkeun Data Real-time: Shows sensor ID, tire pressure, temperature, and sensor voltage.
• OE Sensor Information Check: Displays brand, part number, and frequency of OE sensors.

4. Setélan

4.1. Setup Alat Awal

1. Ngabongkar: Carefully remove the TP150 tool and accessories from the packaging.
2. Daya Hurung: Pencét tombol daya pikeun ngaktipkeun alat.
3. Pembaruan parangkat lunak: It is highly recommended to update the device software to the latest version before first use. Connect the device to a computer with internet access and follow the update instructions provided on the XTOOL official website or through the device's update menu. (Note: Some functionalities may not work correctly without the latest software.)

4.2. Nyambungkeun ka Kendaraan

1. Locate the vehicle's OBDII port, typically under the dashboard on the driver's side.
2. Pastikeun ignition kendaraan aya dina posisi OFF.
3. Connect the OBDII cable from the TP150 tool to the vehicle's OBDII port.
4. Turn the vehicle's ignition to the ON position (engine off). The TP150 will power on automatically via the OBDII connection.

5. Parentah Operasi

The TP150 offers various functions accessible from the main menu. Navigate using the directional buttons and confirm selections with the OK button.

5.1. Ngaktipkeun Sensor TPMS

1. Tina ménu utama, pilih "TPMS" or "Activate".
2. Choose the vehicle make, model, and year.
3. Pilih "Activate Sensor".
4. Hold the TP150 tool near each tire's valve stem and press the activation button.
5. The tool will display sensor information (ID, pressure, temperature, voltage) upon successful activation.

5.2. Prosedur Diajar Deui TPMS

Relearning is required when new sensors are installed, tires are rotated, or the ECU is replaced.

1. Tina ménu utama, pilih "TPMS", tuluy "Relearn".
2. Select the vehicle make, model, and year.
3. Choose the appropriate relearn method:
• OBD Diajar deui: Connect the TP150 to the vehicle's OBDII port. Follow on-screen instructions to transfer new sensor IDs to the vehicle's ECU.
• Static Relearn: Follow the specific vehicle manufacturer's procedure, often involving a sequence of actions (e.g., turning ignition on/off, pressing brake pedal). The TP150 will guide you through the process.
4. Confirm successful relearn on the device screen and check the vehicle's dashboard for the TPMS warning light status.

5.3. Programming XTOOL Sensors

The TP150 can program XTOOL 315/433MHz sensors only. This is useful for replacing faulty sensors.

1. Tina ménu utama, pilih "TPMS", tuluy "Program Sensor".
2. Place the XTOOL sensor to be programmed near the TP150's antenna.
3. Choose one of the following programming methods:
• Automatic ID Generation: The tool generates a new, unique sensor ID.
• Enter ID Manually: Input a specific sensor ID if known.
• Copy ID by Activating: Activate an existing sensor to copy its ID to the new XTOOL sensor.
• Read ECU Copy ID: Read sensor IDs directly from the vehicle's ECU via the OBDII port and copy them to new XTOOL sensors.
4. Follow the on-screen prompts to complete the programming.

5.4. Diagnosing TPMS System

1. Connect the TP150 to the vehicle's OBDII port.
2. Tina ménu utama, pilih "TPMS", tuluy "Diagnosis".
3. The tool will scan the TPMS system for Diagnostic Trouble Codes (DTCs).
4. Review the displayed DTCs to identify system faults.
5. After repairs, select "Bersihkeun DTC" to erase the codes and reset the TPMS warning light.

6. Pangropéa

• beberesih: Ngusap alat ku lemes, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Panyimpenan: Store the TP150 in its protective case in a dry, cool environment when not in use.
• Apdet parangkat lunak: Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models and sensors.
• Perawatan batré: If the device has an internal battery, avoid fully discharging it for extended periods. Charge it periodically if stored for a long time.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

9.1. Émbaran jaminan

XTOOL products typically come with a limited warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official XTOOL website for detailed warranty terms and conditions, including duration and coverage specifics.

9.2. Rojongan Téknis

For technical assistance, software updates, or any inquiries regarding your XTOOL TP150, please contact XTOOL customer support through their official channels:

• Resmi Websitus: www.xtooltech.com (Check for support contact details, FAQs, and software downloads)
• Rojongan Email: Tingal bagian kontak dina resmi websitus.
• Sumberdaya Online: Many helpful guides and videos may be available on the XTOOL websitus atanapi saluran média sosial resmi na.

When contacting support, please have your product model (XT-TP150) and serial number ready.