1. Bubuka
Thank you for choosing the FERM HDM1014 16mm 1100W Hammer Drill. This powerful corded tool is designed for efficient drilling and hammer drilling in various materials. To ensure safe and optimal performance, please read this instruction manual thoroughly before operating the tool. Keep this manual in a safe place for future reference.
2. Parentah Kasalametan
Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
- Kasalametan Area Gawé: Jaga wewengkon gawé anjeun beresih jeung cahayana alus. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
- Kasalametan listrik: Colokan pakakas listrik kudu cocog jeung stop kontakna. Ulah ngarobah colokanna ku cara naon waé. Ulah make colokan adaptor naon waé jeung pakakas listrik nu geus dibumikeun (digrounded). Hindarkeun kontak awak jeung permukaan nu geus dibumikeun atawa digrounded saperti pipa, radiator, kompor, jeung kulkas.
- Kasalametan Pribadi: Salawasna nganggo pelindung panon. Anggo kacamata kaamanan, kacamata pelindung, atanapi pelindung raray. Anggo pelindung dédéngéan nalika ngoperasikeun alat-alat anu ribut. Paké baju anu pantes. Ulah nganggo baju atanapi perhiasan anu leupas. Jauhkeun rambut, baju, sareng sarung tangan anjeun tina bagian anu obah.
- Pamakéan sareng Perawatan Alat: Ulah maksakeun alat kakuatan. Anggo alat kakuatan anu leres pikeun aplikasi anjeun. Pegatkeun sambungan colokan ti sumber listrik samemeh nyieun sagala panyesuaian, ngaganti asesoris, atawa nyimpen parabot kakuatan.
- jasa: Gaduh alat listrik anjeun dilayanan ku jalma perbaikan anu mumpuni ngan ukur nganggo suku cadang anu sami. Ieu bakal mastikeun yén kasalametan alat kakuatan dijaga.
3. Eusi Paket
Carefully unpack the hammer drill and check if all items are present and undamaged. If any parts are missing or damaged, please contact your supplier immediately.
- FERM HDM1014 Palu bor
- Drill bits (various sizes)
- konci cuk
- Gagang samping
- Jero eureun
- Manual pamaké
4. Fitur Produk
The FERM HDM1014 hammer drill is equipped with features designed for performance and user convenience:
- Motor 1100W anu kuat: Nyadiakeun ample power for demanding drilling tasks.
- 16mm Keyless Chuck: Allows for quick and easy bit changes without the need for a separate chuck key.
- Fungsi palu: Engages for efficient drilling in masonry and concrete.
- Fungsi sabalikna: Useful for removing stuck drill bits and driving/removing screws.
- Desain ergonomis: Ensures comfortable handling during prolonged use.
Image: The FERM HDM1014 Hammer Drill, showcasing its robust design, side handle for improved control, and the keyless chuck mechanism. The drill is depicted in its multi-color finish.
5. Setélan
5.1 Attaching the Side Handle and Depth Stop
- Kendurkeun gagang sisi ku cara muterkeunana ka arah anu sabalikna tina jarum jam.
- Slide the side handle onto the front of the drill housing.
- Insert the depth stop into the hole on the side handle. Adjust the depth stop to the desired drilling depth.
- Tighten the side handle by rotating it clockwise to secure both the handle and the depth stop.
5.2 Masang / Nyoplokkeun Bor Bits
- Pastikeun bor geus unplugged tina sumber kakuatan.
- Puterkeun kerah cuk sabalikna jarum jam pikeun muka rahang cuk.
- Insert the drill bit fully into the chuck jaws.
- Rotate the chuck collar clockwise to tighten the jaws securely around the drill bit. Ensure the bit is centered and firmly held.
- Pikeun miceun, muterkeun kerah cuk counter-jarum jam tur tarik bit kaluar.
6. Parentah Operasi
6.1 Sambungan Daya
Connect the drill's power cord to a suitable electrical outlet (refer to specifications for voltage requirements). Ensure the power switch is in the 'OFF' position before plugging in.
6.2 Selecting Drilling Mode
The FERM HDM1014 features a mode selector switch, typically located on the side of the drill housing. Select the appropriate mode for your task:
- Modeu Pangeboran (Ikon Pangeboran): For drilling in wood, metal, plastic, and other non-masonry materials.
- Modeu Pangeboran Palu (Ikon Palu): For drilling in masonry, concrete, and stone. This mode combines rotation with an impact action.
6.3 Starting and Stopping the Drill
- Pikeun ngamimitian bor, pencét saklar pemicu.
- Pikeun ngeureunkeun bor, leupaskeun saklar pemicu.
- For continuous operation, press the trigger and then press the lock-on button (if available). To release, press the trigger again.
6.4 Ngagunakeun Fungsi Tibalik
The reverse switch is typically located near the trigger. Push it to the left or right to change the direction of rotation. Use the reverse function to remove stuck drill bits or for driving/removing screws (if using appropriate screwdriver bits).
6.5 Tip Pangeboran
- Always secure your workpiece firmly before drilling.
- Larapkeun ajeg, malah tekanan. Ulah maksakeun bor.
- Pikeun liang anu jero, cabut mata bor sacara périodik pikeun ngabersihan kokotor.
- When drilling metal, use a cutting lubricant to prolong bit life and improve cutting efficiency.
7. Pangropéa
Regular maintenance ensures the longevity and safe operation of your FERM HDM1014 hammer drill.
- beberesih: After each use, clean the tool housing with a soft cloth. Do not use harsh chemicals or abrasive cleaners. Keep ventilation openings clear of dust and debris.
- Sikat Karbon: Sikat karbon panginten kedah digentos saatos dianggo lami. Ieu kedah dilakukeun ku teknisi servis anu mumpuni.
- Inspeksi kabel: Pariksa kabel listrik sacara rutin pikeun ningali tanda-tanda karusakan. Upami ruksak, mangga gentos ku ahli anu mumpuni.
- Panyimpenan: Simpen bor di tempat anu garing, aman, sareng teu kahontal ku barudak.
8. Cara ngungkulan
If you encounter issues with your FERM HDM1014, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Bor teu ngamimitian | Taya catu daya; ari ruksak / colokan; Saklar lepat | Check power outlet and connections; Inspect cord/plug for damage; Contact service center if switch is faulty. |
| Drill bit not rotating or slipping | Chuck not tightened properly; Worn drill bit | Tighten chuck securely; Replace worn drill bit. |
| Geter atawa noise kaleuleuwihan | Loose components; Damaged internal parts | Check for loose screws; Discontinue use and contact service center. |
If the problem persists after attempting these solutions, please contact FERM customer support or an authorized service center.
9. Spésifikasi
Technical specifications for the FERM HDM1014 Hammer Drill:
| Fitur | Nilai |
|---|---|
| merek | FERM |
| Nomer modél | HDM1014 |
| Sumber Daya | Kabel Listrik |
| Daya Maksimum | 1100 W |
| Voltage | 4 V (Catetan: voltage seems unusually low for an 1100W tool. Please verify with product labeling.) |
| Jenis Chuck | Tanpa konci |
| Ukuran Chuck maksimum | 16 mm |
| Laju (Tanpa beban) | 750 rpm |
| Fungsi Palu | Sumuhun |
| Fungsi Mundur | Sumuhun |
| Laju adjustable | No |
| Item Beurat | 9.73 kg |
| Ukuran Paket | 45.6 x 37.2 x 13.8 cm |
| Komponén Kaasup | Drill bits, Chuck key |
| Batré Diperlukeun | No |
10. Garansi jeung Rojongan
FERM products are manufactured to high-quality standards and are guaranteed against defects in materials and workmanship for a period specified by your local retailer or distributor. Please retain your purchase receipt as proof of purchase.
For warranty claims, technical support, or spare parts, please contact your original point of purchase or visit the official FERM websitus pikeun inpormasi kontak sareng lokasi pusat layanan.
Always refer to the specific warranty terms and conditions provided with your product at the time of purchase.
