1. Bubuka
Thank you for choosing the lightmaXX LED Blinder 2. This professional stage lighting fixture is designed to provide powerful and versatile illumination for various applications. Featuring two 50-watt warm white COB LEDs, DMX control, and a strobe function, it offers robust performance and flexible integration into your lighting setup. Please read this manual thoroughly before operation to ensure safe and optimal use of your device.
2. Parentah Kasalametan
Salawasna perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah kejutan listrik, seuneu, atanapi tatu:
- Alat ieu kanggo panggunaan profésional wungkul.
- Pastikeun catu daya voltage cocog sarat alat.
- Ulah ngalaan alat ka hujan atawa beueus.
- Salawasna sambungkeun alat ka colokan listrik grounded.
- Ulah muka perumahan. Henteu aya bagian anu tiasa dilayanan ku pangguna di jero. Rujuk sadayana jasa ka tanaga anu mumpuni.
- Hindarkeun paparan panon langsung kana sumber cahaya.
- Pastikeun ventilasi nyukupan di sabudeureun unit pikeun nyegah overheating.
- Always secure the device with a safety cable when mounting overhead.
- Pegatkeun sambungan tina kakuatan saméméh beberesih atawa perawatan.
3. Produk Langkungview
The lightmaXX LED Blinder 2 features a robust design with two powerful COB LEDs and intuitive controls.
Gambar 3.1: Hareupeun view of the lightmaXX LED Blinder 2, showing the two illuminated COB LEDs.
Gambar 3.2: Hareupeun view of the lightmaXX LED Blinder 2, illustrating the power cable connection point.
Figure 3.3: Rear panel of the lightmaXX LED Blinder 2, detailing the control display, DMX In/Out, Power In/Out, and safety rope attachment point.
Figure 3.4: Close-up of the control panel, showing the digital display and navigation buttons (MENU, UP, DOWN, ENTER).
3.1 Komponén
- 2 x 50W Warm White COB LEDs
- Digital Display and Control Buttons (MENU, UP, DOWN, ENTER)
- DMX In/Out (3-pin XLR)
- Power In/Out (IEC)
- Disambungkeun Bracket
- Safety Rope Attachment Point
4. Setélan
4.1 Pamasangan
The lightmaXX LED Blinder 2 comes with a versatile mounting bracket for truss, floor, or stand mounting. Ensure the mounting surface or structure can safely support the weight of the fixture. Always use a safety cable (not included) when mounting the unit overhead to prevent accidental falls.
- Attach the mounting bracket securely to a truss clamp atawa nangtung.
- Adjust the angle of the fixture using the side knobs on the bracket.
- Connect a safety cable from the fixture's safety rope attachment point to the mounting structure.
4.2 Sambungan Daya
Connect the supplied power cable to the "POWER IN" IEC connector on the rear of the unit and then to a suitable grounded power outlet. The "POWER OUT" connector allows for daisy-chaining power to multiple units (check maximum power draw before connecting multiple units).
4.3 Sambungan DMX (Opsional)
For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" port on the blinder. To daisy-chain multiple DMX fixtures, connect a DMX cable from the "DMX OUT" port of the first blinder to the "DMX IN" port of the next fixture in the chain. Terminate the last fixture in the DMX chain with a DMX terminator.
5. Parentah Operasi
5.1 Operasi Panel Control
Use the four buttons on the rear panel to navigate the menu and adjust settings:
- MENU: Enters the menu or goes back to the previous menu level.
- UP: Scrolls up through menu options or increases a value.
- TURUN: Scrolls down through menu options or decreases a value.
- Asupkeun: Konfirmasi pilihan atawa asup kana submenu.
5.2 DMX Modes and Channel Assignment
The lightmaXX LED Blinder 2 supports 6 DMX channels. Refer to the DMX chart below for specific channel functions. Set the DMX address using the control panel. The default DMX address is A001.
| Saluran | Fungsi | Rentang nilai | Katerangan |
|---|---|---|---|
| 1 | Juragan Dimmer | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) |
| 2 | LED 1 Dimmer | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 1 |
| 3 | LED 2 Dimmer | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 2 |
| 4 | Pangaruh Strobe | 0-255 | 0 = No Strobe, 1-127 = Strobe Speed, 128-255 = Pulse/Random Strobe |
| 5 | Diwangun-di Program | 0-255 | Selects various pre-programmed light shows |
| 6 | Speed Program | 0-255 | Adjusts the speed of selected built-in programs |
5.3 Standalone Modes
The blinder can operate without a DMX controller using its built-in programs or sound-activated mode. Access these modes via the control panel menu.
- Modeu Otomatis: Cycles through pre-programmed light sequences.
- Modeu Aktip Sora: The light reacts to ambient sound via the built-in microphone.
- Manual Dimmer: Adjust the brightness of each LED directly from the menu.
6. Pangropéa
Regular maintenance ensures the longevity and optimal performance of your lightmaXX LED Blinder 2.
- beberesih: Disconnect the power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp lawon bisa dipaké. Ulah make cleaners abrasive atawa pangleyur.
- Fan and Vent Cleaning: Periodically check and clean the cooling fan and ventilation openings to ensure proper airflow and prevent overheating. Use compressed air to remove dust.
- Pamariksaan kabel: Regularly inspect power and DMX cables for any signs of damage (cuts, frayed wires). Replace damaged cables immediately.
- Panyimpenan: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a suitable flight case.
7. Cara ngungkulan
If you encounter issues with your lightmaXX LED Blinder 2, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya kakuatan | Kabel listrik pegat; teu aya listrik tina stop kontak; sekeringna beak. | Check power cable connection; test outlet with another device; check and replace fuse if necessary (refer to qualified technician). |
| Taya kontrol DMX | Incorrect DMX address; faulty DMX cable; no DMX signal from controller; DMX terminator missing. | Verify DMX address matches controller; test DMX cable; ensure DMX controller is sending signal; add DMX terminator to the last fixture. |
| Lights flicker or behave erratically | Poor DMX signal; electrical interference; overheating. | Check DMX cable quality and connections; ensure proper grounding; provide adequate ventilation. |
| Unit overheats | Ventilasi tersumbat; beroperasi dina suhu lingkungan anu luhur. | Clear all ventilation openings; ensure sufficient space around the unit for airflow; operate within specified temperature range. |
If the problem persists after trying these solutions, please contact lightmaXX customer support or your authorized dealer.
8. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | lightmaXX |
| Nomer modél | LIG0016526-000 |
| Sumber Cahaya | 2 x 50W COB Warm White LEDs |
| Saluran DMX | 6 Saluran |
| Modeu kontrol | DMX, Auto, Sound Active, Manual |
| Ukuran (L x W x H) | 31.2 x 18.7 x 18.5 cm (kira-kira 12.28 x 7.36 x 7.28 inci) |
| Sumber Daya | Kabel Listrik |
| Tipe Pamasangan | Ceiling Mount (with bracket) |
| Warna | Hideung |
9. Garansi jeung Rojongan
Specific warranty information for the lightmaXX LED Blinder 2 is not provided in this manual. Please refer to your purchase documentation, the lightmaXX official website, or contact your retailer for details regarding warranty coverage and terms.
For technical support, service, or spare parts inquiries, please contact lightmaXX customer service or your authorized dealer. Ensure you have your model number (LIG0016526-000) and purchase date available when contacting support.
Manufacturer: lightmaXX
