Buku Panduan Nerf Elite 2.0 Volt SD-1 Blaster
Model: E9952F03 | Brand: Nerf
Bubuka
The Nerf Elite 2.0 Volt SD-1 Blaster is designed for fun, active play, featuring a light beam for enhanced targeting. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and safety guidelines.
Émbaran Kasalametan
WARNING: TO AVOID EYE INJURY.
Do not aim at eyes or face. Use of eyewear is recommended for players and people within range. Use only official Nerf darts. Other darts may not meet safety standards. Do not modify darts or blaster.
PERHATOSAN: BAHAYA CHOKING - Bagian leutik tiasa dibangkitkeun. Henteu kanggo murangkalih sahandapeun 3 taun.
Dianjurkeun pikeun umur 8 sarta nepi.
Naon dina Box
- Nerf Elite 2.0 Volt SD-1 Blaster
- 6 Dart Nerf Elite Resmi
- Manual Parentah (Dokumén ieu)
Image: The Nerf Elite 2.0 Volt SD-1 Blaster shown alongside the included 6 Nerf Elite Darts.
Disetél
1. Pamasangan batré
The light beam feature requires 2x 1.5V AAA alkaline batteries (not included).
- Panggihan kompartemen batré dina blaster.
- Ngagunakeun obeng sirah Phillips (teu kaasup), cabut panutup kompartemen batré.
- Selapkeun 2 batré AAA, mastikeun polaritasna bener (+/-) sakumaha dituduhkeun di jero kompartemen.
- Ngaganti panutup sarta ngamankeun eta kalawan screw nu.
2. Ngamuat Dart
The Volt SD-1 blaster is a single-shot blaster. It includes storage for additional darts.
- Insert one official Nerf Elite dart into the front barrel of the blaster.
- Additional darts can be stored in the integrated dart storage slots on the blaster.
Gambar: A close-up view of the blaster, highlighting the front-loading barrel and the dart storage slots.
Parentah Operasi
1. Ngalapiskeun Blaster
To prepare the blaster for firing, pull the priming handle located at the back of the blaster all the way back until it clicks into place. Then, push it forward to return it to its original position.
2. Ngalungkeun Panah
Once primed, aim the blaster at your target and pull the trigger to fire the dart.
3. Using the Light Beam Targeting
The Volt SD-1 features a light beam to assist with targeting, especially in low-light conditions. The beam works on targets up to 15 feet (4.5 meters) away.
- Press the button located near the front of the blaster to activate the light beam.
- Align the light beam with your target for improved accuracy.
- Press the button again to turn off the light beam.
Image: The blaster with its light beam activated, demonstrating the targeting feature.
Pangropéa
- Jaga blaster tetep bersih ku cara ngusapna nganggo lawon garing.
- Avoid exposing the blaster to extreme temperatures or moisture.
- Store darts in a clean, dry place to maintain their integrity.
- Cabut batréna upami blaster moal dianggo salami waktos anu lami pikeun nyegah bocor.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Dart henteu némbak atanapi némbak lemah. | Blaster not fully primed; damaged dart; non-official dart. | Ensure priming handle is pulled back completely until it clicks. Use only official Nerf Elite darts. Replace damaged darts. |
| Sinar cahaya teu jalan. | Batré pareum atawa salah dipasang. | Check battery polarity. Replace with fresh AAA alkaline batteries. |
spésifikasi
- Jumlah modél: E9952F03
- Ukuran produk: 0.39 x 0.39 x 0.39 inci
- Beurat barang: 12 ons
- Produsén Disarankeun Umur: 8 - 8 taun
- Batré diperlukeun: 2x 1.5V AAA alkaline batteries (not included)
- Jenis Panah: Official Nerf Elite Darts
- Light Beam Range: Nepi ka 15 suku (4.5 méter)
- Pabrikan: Hasbro
Garansi sareng Rojongan
For information regarding product warranty or customer support, please refer to the manufacturer's official websitus atanapi ngahubungi layanan palangganna sacara langsung. Rincian garansi khusus tiasa bénten-bénten gumantung kana daérah sareng pangecér.
Pabrikan: Hasbro
Nganjang ka Toko Nerf pikeun langkung seueur produk sareng inpormasi.
