1. Bubuka
This manual provides comprehensive instructions for the safe and efficient operation of your Helios HS4201 Electronic Digital Timer. Please read this manual thoroughly before use and retain it for future reference.
Gambar 1: Helios HS4201 Electronic Digital Timer. This image displays the white digital timer with a standard European Type F (Schuko) socket on the front and a two-pin plug on the back. The top panel features a digital display and several control buttons.
2. Émbaran Kasalametan
- Ensure the timer is connected to a properly grounded 220V AC power outlet.
- Ulah ngaleuwihan kapasitas beban maksimum 3500W.
- This device is rated IP20, meaning it is protected against solid objects over 12.5mm but has no protection against water. Use only in dry indoor environments.
- Ulah ngabongkar atanapi nyobian ngalereskeun alat. Rujuk sadayana jasa ka tanaga anu mumpuni.
- Jauhkeun tina jangkauan barudak.
3. Setélan
3.1 Mimiti Power-Up
- Plug the Helios HS4201 timer into a standard 220V wall outlet.
- The digital display will illuminate. If the display is blank, ensure the timer is securely plugged in.
- Allow the internal battery (for memory retention) to charge for approximately 15-30 minutes before programming.
3.2 Nyetél Waktos Ayeuna
Refer to the buttons on the top panel (e.g., "CLOCK", "HOUR", "MINUTE", "DAY").
- Pencét jeung tahan tombol JAM kancing.
- Bari nyekelan JAM, pencét tombol POÉ tombol pikeun ngeset dinten ayeuna dina saminggu.
- Bari nyekelan JAM, pencét tombol JAM tombol pikeun ngeset jam ayeuna.
- Bari nyekelan JAM, pencét tombol MENIT tombol pikeun nyetél menit ayeuna.
- Ngaleupaskeun JAM button. The current time is now set.
4. Parentah Operasi
4.1 Programming On/Off Cycles (Up to 10 Settings)
The Helios HS4201 allows for up to 10 distinct ON/OFF programming cycles.
- Pencét éta PROG tombol sakali. Layar bakal némbongkeun "1 ON".
- Pencét POÉ to select the day(s) for the first ON event (e.g., individual days, weekdays, weekends, all days).
- Pencét JAM to set the hour for the first ON event.
- Pencét MENIT to set the minute for the first ON event.
- Pencét PROG deui. Layarna bakal némbongkeun "1 OFF".
- Repeat steps 2-4 to set the day(s), hour, and minute for the first OFF event.
- Terus pencét PROG to cycle through "2 ON", "2 OFF", up to "10 ON", "10 OFF", setting each as required.
- Saatos netepkeun sadaya program anu dipikahoyong, pencét tombol JAM tombol pikeun kaluar mode programming tur balik ka tampilan waktos ayeuna.
4.2 Manual Override
The MANUAL button (or similar, check device labeling) allows you to override the programmed settings temporarily.
- Pencét MANUAL once: Switches to ON (if currently OFF) or OFF (if currently ON) until the next programmed event.
- Pencét MANUAL multiple times: Cycles through modes like AUTO ON, AUTO OFF, ON, OFF. Select AUTO ON or AUTO OFF to re-engage programmed settings.
4.3 Resetting the Timer
To clear all settings and return the timer to its factory default state, locate the small RESET button (often recessed) and press it using a pointed object (e.g., a pen tip). The display will clear, and you will need to set the current time and reprogram all cycles.
5. Pangropéa
- beberesih: Pegatkeun sambungan timer ti stop kontak listrik saméméh beberesih. Ngusap bagian luar ku kaén anu lembut sareng garing. Ulah make cleaners cair atawa bahan abrasive.
- Panyimpenan: Simpen timer di tempat anu tiis sareng garing nalika henteu dianggo.
- Batré: The internal battery is for memory retention and is not user-replaceable. If the display frequently resets or loses settings, the internal battery may be depleted.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Paparanana kosong. | Taya kakuatan. | Ensure the timer is securely plugged into a live 220V outlet. Check the circuit breaker. |
| Timer does not switch ON/OFF at programmed times. | Incorrect programming; Manual override active; Timer in OFF mode. | Review programmed settings. Press MANUAL to ensure it is in AUTO ON or AUTO OFF mode. |
| Setélan leungit saatos dipareumantage. | Internal battery depleted or not fully charged. | Plug the timer in for 15-30 minutes to charge the internal battery. If the issue persists, the internal battery may need replacement by a service professional. |
| Connected appliance does not turn on. | Appliance fault; Timer not supplying power; Overload. | Test the appliance directly in the wall outlet. Ensure the timer is in an ON state. Verify the appliance's power consumption does not exceed 3500W. |
7. Spésifikasi
- model: HS4201
- merek: Helios
- Voltage: 220V AC
- Beban Max: 3500W
- Peunteun IP: IP20 (pamakéan jero rohangan wungkul)
- Setélan anu tiasa diprogram: Nepi ka 10 siklus ON/OFF
- ukuran: 8.5 x 3.81 x 11 cm (kira-kira)
- beurat: 2.98 Kilogram (kira-kira.)
- Batré diperlukeun: No (Internal battery for memory retention, not user-replaceable)
8. Émbaran jaminan
Helios products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or contact Helios customer support. This warranty typically covers defects in materials and workmanship under normal use.
9. Rojongan Palanggan
If you encounter any issues or have questions regarding your Helios HS4201 Electronic Digital Timer that are not addressed in this manual, please contact Helios customer support. Contact details can usually be found on the product packaging or the official Helios websitus.
Please have your model number (HS4201) and purchase date available when contacting support.
