PowerA Wireless Controller for Nintendo Switch - Dungeon Jump Mario User Manual

Bubuka

This manual provides essential instructions for setting up, operating, and maintaining your PowerA Enhanced Wireless Controller for Nintendo Switch, featuring the Dungeon Jump Mario design. Please read this manual thoroughly before use to ensure optimal performance and longevity of your controller.

Naon dina Box

• PowerA Enhanced Wireless Controller (Dungeon Jump Mario)
• 10 ft (3m) USB-C Charge Cable
• Manual pangguna (dokumén ieu)

Produk Leuwihview

Familiarize yourself with the various components of your PowerA Wireless Controller.

Image 1: Controller Features Diagram. This image displays the PowerA Enhanced Wireless Controller from a top-down perspective, highlighting key features such as anti-friction rings, low battery indicator LED, USB-C charge port, program button, and advanced gaming buttons.

Gambar 2: Hareupeun View. A hareup langsung view of the PowerA Enhanced Wireless Controller, showcasing the Dungeon Jump Mario design, joysticks, D-pad, and face buttons.

Disetél

1. Ngecas Controller

The controller comes with a built-in rechargeable lithium-ion battery. Before first use, fully charge the controller.

1. Connect the small end of the included 10 ft (3m) USB-C charge cable to the USB-C port on the top of the controller.
2. Connect the other end of the cable to a USB port on your Nintendo Switch dock or a USB wall charger (not included).
3. The LED indicator on the front of the controller will illuminate to show charging status. It will turn off when fully charged.

Image 3: Charging Port. This image shows the top of the controller with the USB-C charging cable inserted into the port.

2. Ngapasangkeun sareng Nintendo Switch

Follow these steps to pair your wireless controller with your Nintendo Switch console:

1. Pastikeun konsol Nintendo Switch anjeun dihurungkeun sareng diénggalan kana vérsi sistem pangénggalna.
2. Tina Menu RUMAH, pilih Controllers, tuluy Robah Pakem / Orde.
3. Nalika aya dina layar Change Grip/Order, pencét sareng tahan tombol Tombol singkronisasi on the back of the PowerA controller for at least three seconds. The Player LED(s) will begin to flash.
4. Once paired, the Player LED(s) will remain solid, indicating the controller is connected.
5. Pencét éta Tombol to confirm and exit the menu.

Note: The controller will automatically reconnect to your Switch console when powered on and within range, provided it was previously paired.

Image 4: Sync Button Location. This image shows the rear of the controller, indicating the position of the small circular Sync button.

Parentah Operasi

Tombol Kaulinan Canggih

The controller features two mappable Advanced Gaming Buttons (AGB) on the back, allowing for on-the-fly button assignments.

1. Pencét éta Tombol Program on the back of the controller. The Program LED will flash, indicating the controller is in programming mode.
2. Press the button you wish to map (A/B/X/Y, L/R, ZL/ZR, Left Stick Press, Right Stick Press, D-pad). The Program LED will flash rapidly.
3. Press the Advanced Gaming Button (AGB L or AGB R) you wish to assign. The Program LED will stop flashing, indicating the button has been successfully mapped.
4. To clear a mapped button, press the Program Button and then the AGB you wish to clear. The Program LED will turn off.

Image 5: Advanced Gaming Buttons. This diagram highlights the location of the Program Button and the two Advanced Gaming Buttons on the underside of the controller.

Kadali gerak

This controller supports motion controls for compatible Nintendo Switch games. The internal gyroscope allows for intuitive tilt-based gameplay.

Perhatosan Batré Lemah

When the controller's battery is low, the Low Battery Warning LED indicator on the front of the controller will flash. Connect the USB-C charge cable to recharge the controller.

Image 6: Player Indicator LEDs. This image shows the bottom front edge of the controller, where the four Player Indicator LEDs are located, which also serve as the low battery warning.

Pangropéa

• beberesih: Paké kaen lemes, garing pikeun ngabersihan controller. Ulah make bahan kimia kasar atawa bahan abrasive.
• Panyimpenan: Nyimpen controller dina tiis, tempat garing jauh ti sinar panonpoé langsung jeung hawa ekstrim.
• Perawatan batré: Pikeun manjangkeun umur batré, ulah sering ngosongkeun batréna. Cas sacara rutin, sanajan teu dianggo terus-terusan.
• Perawatan kabel: Handle the USB-C charge cable carefully. Avoid bending or twisting it excessively.

Pamérésan masalah

Controller not pairing or connecting:

• Pastikeun controller dieusi.
• Verify the Nintendo Switch console is updated to the latest system version.
• Repeat the pairing process as described in the "Pairing with Nintendo Switch" section.
• Move closer to the Nintendo Switch console to ensure you are within Bluetooth range.
• Try restarting your Nintendo Switch console.

Tombol atanapi joystick teu responsif:

• Ensure the controller is properly connected and charged.
• Test the controller in a different game or in the Switch's controller calibration settings.
• If issues persist, contact PowerA support.

Battery not holding a charge:

• Ensure the USB-C cable is securely connected to both the controller and a power source.
• Cobi nganggo port USB atanapi adaptor témbok anu béda.
• The internal battery has a limited lifespan. If the controller is old, battery degradation may occur.

Watesan penting:

This controller does TEU support HD rumble, IR (Infrared), or Amiibo NFC functionality. These features are exclusive to official Nintendo Joy-Con controllers and some Nintendo Pro Controllers.

spésifikasi

Garansi sareng Rojongan

PowerA backs all products with a two-year limited warranty. For warranty claims, technical assistance, or further support, please visit the official PowerA support websitus:

Dukungan PowerA

Mangga tahan bukti pameseran Anjeun pikeun layanan jaminan.