1. Bubuka
This manual provides essential information for the safe and efficient operation of your Crown DriveCore Install 2600N Amplifier. Please read this manual thoroughly before installation and use to ensure optimal performance and to prevent damage to the unit or associated equipment.
The Crown DriveCore Install 2600N is a high-performance, 2-channel power amplifier designed for fixed installation applications, delivering 600 watts RMS per channel. It features DriveCore technology for efficient power delivery and network capabilities for remote monitoring and control.
2. Émbaran Kasalametan
PERHATOSAN: To prevent fire or electric shock, do not expose this appliance to rain or moisture. Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified personnel.
- Pastikeun grounding anu leres.
- Entong meungpeung lawang angin.
- Anggo ngan ukur kabel daya sareng asesoris anu ditangtukeun.
- Pegatkeun sambungan kakuatan samemeh nyieun sambungan atawa ngalakukeun pangropéa.
- Avoid operating in extreme temperatures or high humidity.
3. Setup jeung Instalasi
3.1 Ngabongkar bungkusan
Ati-ati ngaleupaskeun ampCabut bungkusna. Pariksa unitna pikeun tanda-tanda karusakan anu mungkin kajantenan nalika transit. Simpen bungkus aslina kanggo transportasi atanapi panyimpenan ka hareup.
3.2 Instalasi fisik
The DCI2x600N amplifier is designed for rack mounting. It occupies 2U of rack space. Ensure adequate ventilation around the unit. Do not install the amplifier directly above heat-generating equipment without proper spacing.
- Gunung nu amplifier securely in a standard 19-inch equipment rack using appropriate rack screws.
- Allow at least 1U of empty space above and below the amplifier for optimal airflow, especially in enclosed racks.
- Ensure the front and rear ventilation grilles are unobstructed.
ukuran: Ukuran 14.3 x 19 x 3.5 inci (L x W x H)
beurat: 22 pon
3.3 Sambungan
Sateuacan ngadamel sambungan naon waé, pastikeun yén amplifier is powered off and disconnected from the mains supply.
3.3.1 Sambungan Input Audio
Sambungkeun sumber audio anjeun (contona, mixer, preampliifier) ka amplifier's input connectors. The DCI2x600N typically uses balanced XLR or Phoenix-style connectors for inputs. Refer to the rear panel for specific input types.
3.3.2 Sambungan Kaluaran Audio
Sambungkeun spiker anjeun ka amplifier's output terminals. Ensure correct polarity (+ to + and - to -) and that the speaker impedance matches the amplifier's specifications. The DCI2x600N supports various output configurations, including low impedance and 70V/100V constant voltagsistem e.
3.3.3 Network Connection (N-model)
For network control and monitoring, connect an Ethernet cable from your network switch or router to the amplifier's network port. This allows integration with Harman's HiQnet Audio Architect software.
3.3.4 Sambungan Daya
Sambungkeun kabel daya AC anu disayogikeun ka amplifier's IEC inlet and then to a suitable mains power outlet. Ensure the power outlet provides the correct voltage and current rating for the amppangagung.
Gambar 1: Front panel of the Crown DriveCore Install 2600N Amplifier. Gambar ieu nampilkeun amplifier's front face, featuring the Crown logo on the left, a central display panel with LED indicators for Fault, Thermal, Clip, Signal, and Ready states for two channels, and the model number "2 600N DRIVECore INSTALL" on the right. A green illuminated power button is also visible on the far right.
4. Parentah Operasi
4.1 Powering on / Pareum
- Daya Hurung: Press the power button located on the front panel. The power indicator will illuminate.
- Pareum listrik: Press and hold the power button for a few seconds until the unit powers down.
4.2 Indikator Panel hareup
The central display panel provides visual feedback on the ampstatus panyatur:
- SALAH: Illuminates if a fault condition is detected (e.g., short circuit, DC offset).
- TERMAL: Nunjukkeun ka amplifier is overheating. The unit may reduce output or shut down to protect itself.
- Klip: Illuminates when the input signal is too high, causing distortion. Reduce input level to prevent clipping.
- -20dB, -10dB, SIGNAL: These LEDs indicate the input signal level for each channel. The SIGNAL LED illuminates when an audio signal is present.
- SIAP: Illuminates nalika amplifier is powered on and ready to pass audio.
- DATA: (Next to Power button) Indicates network activity for the N-model.
4.3 Network Control and Monitoring
The DCI2x600N amplifier can be controlled and monitored remotely via a network connection using Harman's HiQnet Audio Architect software. This allows for configuration of input/output routing, DSP settings, monitoring of amplifier status, and more.
- Install HiQnet Audio Architect software on a connected computer.
- Panggihan ampliifier dina jaringan.
- Access and configure amplifier parameters as needed.
5. Pangropéa
5.1 beberesih
Ngabersihan périodik amplifier's exterior with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation grilles are free from dust and debris to maintain proper airflow.
5.2 Ventilasi
Pariksa sacara rutin yén amplifier's ventilation openings are not obstructed. Proper airflow is crucial for preventing overheating and ensuring long-term reliability.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya kakuatan | Power cord disconnected; no mains power; ampSekring liférator peupeus. | Check power cord connection; verify mains power; contact qualified service personnel for fuse replacement. |
| Taya kaluaran sora | Input signal missing; speaker cables disconnected; amplifier dina modeu gangguan. | Verify audio source and input connections; check speaker cable connections and polarity; check front panel FAULT indicator. |
| Sora distort | Input signal too high (clipping); incorrect speaker impedance; faulty speaker. | Reduce input level (check CLIP indicator); verify speaker impedance matches ampliifier; test kalawan speaker béda. |
| THERMAL LED illuminated | Insufficient ventilation; excessive ambient temperature; prolonged high output. | Pastikeun aliran hawa anu leres di sakitarna amplifier; reduce ambient temperature; lower output level. |
7. Spésifikasi
- model: DCI2x600N
- Saluran: 2
- Kaluaran kakuatan: 600 W RMS per channel
- Tanggapan Frékuénsi: 20 Hz - 20 kHz (+0/-1 dB)
- Total Distorsi Harmonis (THD): < 0.5%
- Rasio Signal-to-Noise: > 100 dB (A-weighted)
- Ukuran (L x W x H): 14.3 x 19 x 3.5 inci
- beurat: 22 pon
- Tipe Pamasangan: Surface Mount (Rack Mountable)
- Pabrikan: Mahkota
8. Garansi jeung Rojongan
8.1 Émbaran jaminan
This Crown product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Crown Audio websitus pikeun istilah jaminan lengkep jeung kaayaan husus pikeun wewengkon Anjeun.
8.2 Rojongan Téknis
For technical assistance, troubleshooting, or service inquiries, please contact Crown Audio customer support. Contact information can typically be found on the official Crown Audio websitus atawa ngaliwatan dealer otorisasi Anjeun.
When contacting support, please have your amplifier's model number (DCI2x600N) and serial number readily available.
