Pituduh Pangguna GeeekPi Mini Tower Kit pikeun Raspberry Pi 4 Modél B

1. Bubuka

This manual provides detailed instructions for assembling, operating, and maintaining your GeeekPi Mini Tower Kit for Raspberry Pi 4 Model B. This kit enhances your Raspberry Pi 4 with a protective case, an efficient ICE Tower Cooler, and a functional 0.96-inch OLED display.

Gambar: Leuwihview of the GeeekPi Mini Tower Kit, showing the assembled case with a Raspberry Pi 4, the ICE Tower Cooler, OLED display, and various included components like the power supply and cables.

2. Kasaluyuan

This GeeekPi Mini Tower Kit is exclusively compatible with the Raspberry Pi 4 Modél B. It is not designed for Raspberry Pi 3B+/3B or other Raspberry Pi models.

3. Eusi Paket

Punten parios yén sadaya item di handap ieu kalebet dina pakét anjeun:

• 1 x ABS Mini Tower Case
• 1 x QC3.0 Power Supply
• 2 x Panel Samping Akrilik
• 1 x 0.96 Inch OLED Display (pre-mounted on the case)
• 1 x ICE Tower Cooler (with 40mm PWM Fan)
• 1 x GPIO Edge Extension
• 1 x Assembly Manual (this document)

Note: The Raspberry Pi 4 Model B board is NOT included in this package and must be purchased separately.

Image: All components included in the GeeekPi Mini Tower Kit, laid out next to the packaging box. This includes the blue ABS case, ICE Tower Cooler, OLED display, acrylic panels, GPIO extension, QC3.0 power supply, and assembly manual.

4. Parentah Majelis

Follow these steps carefully to assemble your GeeekPi Mini Tower Kit with your Raspberry Pi 4 Model B.

4.1 Prepare the Raspberry Pi

1. Pasang Bantalan Termal: Apply the thermal pad to the CPU of your Raspberry Pi 4.
2. Selapkeun Kartu TF: For easier installation, insert your TF (Micro SD) card into the Raspberry Pi motherboard before placing it in the case.

Image: Visual guide for the initial assembly steps. Step 1 shows applying a thermal pad to the Raspberry Pi CPU. Step 2 shows inserting a TF card into the Raspberry Pi. Step 3 illustrates fixing the metal bracket of the ICE Tower Cooler with M2.5 screws. Step 4 shows gently pressing the Raspberry Pi and cooler into the case and securing with screws from the bottom.

4.2 Install the ICE Tower Cooler

3. Fix Cooler Bracket: Secure the metal bracket of the low-profile ICE Tower Cooler using the provided M2.5 screws.
4. Mount Raspberry Pi and Cooler: Gently hold down the top of the hot end (cooler) and carefully install the Raspberry Pi and cooler assembly into the main ABS case. Secure them by installing screws from the bottom of the case.

4.3 Secure Raspberry Pi and Connect OLED

5. Fix Raspberry Pi Motherboard: Secure the Raspberry Pi motherboard within the case using M2.5 flat head screws.
6. Connect OLED Cable: Insert the white plug of the OLED screen cable into the side jack of the driver board. Connect the female header to the GPIO pin of the Raspberry Pi. Pay close attention to the direction; the red wire typically indicates the 5V pin. Refer to the GPIO pinout diagram for correct orientation.

Image: Visual guide for the later assembly steps. Step 5 shows securing the Raspberry Pi motherboard with screws. Step 6 details connecting the OLED cable to the driver board and the GPIO pins, highlighting the 5V pin. Step 7 shows fastening the acrylic side panels. Step 8 illustrates plugging in the power supply.

Image: Detailed diagram showing the Raspberry Pi GPIO pinout and the correct wiring connections for the OLED display and the ICE Tower Cooler fan. It highlights 5V power, ground, and specific GPIO pins for I2C communication and PWM control.

4.4 Final Assembly and Power

7. Fasten Acrylic Panels: Attach the transparent acrylic side panels to both sides of the case using the remaining screws.
8. Sambungkeun Kakuatan: Plug in the QC3.0 power supply to the USB-C power port of the Raspberry Pi.

Important: Ensure all connections are secure and correctly oriented before applying power.

5. Operation and Software Configuration

After physical assembly, software configuration is required to enable the OLED display and RGB lighting features.

5.1 Pungsi OLED Témbongkeun

The 0.96-inch OLED display can show various system information such as the Raspberry Pi's IP address, CPU temperature, memory status, and network card traffic. To enable the OLED display and its RGB ambient light, you must install the necessary drivers.

Note: The OLED display will not show any information until the drivers are installed and enabled. Refer to the official GeeekPi documentation or community resources for specific driver installation instructions.

Image: A close-up of the 0.96-inch OLED display integrated into the GeeekPi Mini Tower Kit, showing system information such as IP address, CPU temperature, and memory usage.

5.2 ICE Tower Cooler and RGB Fan

The ICE Tower Cooler features a 40mm PWM fan and RGB three-color programmable LED lights. The lights on the cooler will synchronize with the RGB ambient lights on the OLED screen driver board.

Note: The RGB lights on the fan will not illuminate until the corresponding drivers are installed and configured. Consult the official GeeekPi documentation for driver installation and customization options.

Image: The GeeekPi Mini Tower Kit with its RGB lighting active, showcasing the illuminated ICE Tower Cooler fan and the ambient glow from the OLED driver board.

6. Pangropéa

• beberesih: Periodically clean the case and fan blades to prevent dust buildup, which can affect cooling performance. Use a soft, dry cloth or compressed air.
• Manajemén Kabel: The case includes internal design for cable arrangement. Ensure cables are neatly routed to avoid obstructing airflow or damaging components.
• Apdet Firmware/Software: Regularly update your Raspberry Pi's operating system and any installed drivers for the OLED and RGB lighting to ensure optimal performance and security.

7. Cara ngungkulan

• Layar OLED Teu Jalan:
  • Ensure the OLED cable is correctly connected to the GPIO pins (especially the 5V pin).
  • Verify that the necessary drivers for the OLED display have been installed and enabled in your Raspberry Pi's operating system.
• RGB Lights Not Illuminating:
  • Confirm that the RGB lighting drivers are installed and configured.
  • Check all power connections to the OLED driver board and the ICE Tower Cooler fan.
• Dissipation panas goréng:
  • Ensure the thermal pad is correctly placed between the Raspberry Pi CPU and the ICE Tower Cooler.
  • Verify that the fan is spinning freely and is not obstructed by cables or dust.
  • Check that the cooler is securely mounted to the Raspberry Pi.
• Difficulty with GPIO Expansion:
  • Ensure the GPIO Edge Extension is correctly seated on the Raspberry Pi's GPIO header.
  • If using an external 40-pin parallel cable, ensure it is connected correctly and is not damaged. (Note: This cable is not included).

Image: The GeeekPi Mini Tower Kit showcasing the GPIO Edge Expansion board connected to the Raspberry Pi's GPIO pins, illustrating how external 40-pin parallel cables (not included) can be used for further expansion.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information and technical support, please refer to the official GeeekPi website or contact their customer service directly. Details are typically provided with your purchase documentation or on the manufacturer's product page.

You can visit the GeeekPi store on Amazon: GeeekPi Amazon Store