Behringer STUDIO L User Manual

1. Bubuka

The Behringer STUDIO L is a comprehensive studio control and communication center designed to streamline your audio workflow. It integrates essential studio functions into a single, compact unit, offering high-quality audio performance and versatile connectivity for professional and home studio environments.

fitur konci ngawengku:

• Premium, ultra-low noise and high headroom studio control.
• Pangontrol volume master sadayana-dina-hiji, pamilih sumber, pangalih monitor, sareng kotak talkback.
• Two state-of-the-art Midas mic preamplifiers with +48 V phantom power.
• Audiophile 192 kHz 2x2 USB audio interface, ideal for computer-based studios.
• True VCA control for extremely precise level control and stereo tracking.

2. Produk Langkungview

The STUDIO L provides intuitive control over your studio monitoring and communication. Below is an overview of the device's front and rear panels.

Gambar 2.1: Front panel of the Behringer STUDIO L, showing all controls and indicators.

Gambar 2.2: Rear panel of the Behringer STUDIO L, displaying all input and output connections.

3. Setup jeung Sambungan

Follow these steps to set up your Behringer STUDIO L and connect it to your studio equipment.

3.1 Sambungan Daya

1. Sambungkeun adaptor daya anu disayogikeun ka DC IN palabuhan dina panel tukang.
2. Colokkeun adaptor kakuatan kana stop kontak listrik anu cocog.
3. Pastikeun POWER switch on the rear panel is in the OFF position before connecting.

3.2 Sambungan USB

The STUDIO L functions as a 192 kHz 2x2 USB audio interface. Connect it to your computer for audio recording and playback.

1. Connect a USB cable from the USB port on the rear panel of the STUDIO L to an available USB port on your computer.
2. The device is compatible with Personal Computers running Windows operating systems. Ensure necessary drivers are installed if required by your operating system.

3.3 Sambungan Input Audio

The STUDIO L features two Midas mic preamplifiers and additional stereo inputs.

Gambar 3.1: Utilizing the Midas mic preamplifiers for vocal recording.

• Mic/Line Inputs (1L, 2R): Connect microphones or line-level instruments to the XLR/TRS combo jacks on the rear panel. Activate +48V phantom power for condenser microphones using the dedicated button on the front panel.
• Stereo Inputs (3/4): Connect stereo line-level sources (e.g., synthesizers, media players) to the 1/4-inch TRS jacks on the rear panel.
• Stereo In (5/6): An additional stereo input is available on the front panel for quick connection of portable devices.

3.4 Sambungan Kaluaran Audio

Connect your studio monitors and headphones to the STUDIO L.

• Monitor Outputs (A, B, C): Connect up to three pairs of studio monitors to the balanced/unbalanced 1/4-inch TRS jacks on the rear panel.
• 2-Track Output: Provides an additional stereo output for recording or routing to other devices.
• Headphone Outputs (1, 2): Connect up to two pairs of headphones to the 1/4-inch TRS jacks on the front panel.

4. Operasi

This section details the operational aspects of the Behringer STUDIO L.

4.1 Powering on / Pareum

1. After all connections are made, flip the POWER switch on the rear panel to the ON position.
2. The POWER jeung USB indicators on the front panel will illuminate.

4.2 Input Gain and Trim

Adjust the input levels for optimal signal quality.

• Ngagunakeun éta GAIN knobs for inputs 1(L) and 2(R) to set the primary input level for microphones or instruments.
• The TRIM knobs for inputs 1/2, 3/4, and 5/6 allow for fine-tuning of the input levels.
• Monitor the input level meters to prevent clipping (red CLIP indicator).

4.3 Pamilihan Sumber

Select which input source you want to monitor.

• Ngagunakeun éta INPUT buttons (1/2, 3/4, 5/6) to select the desired input source for monitoring.
• The USB button selects the audio stream from your computer.
• The 2-TR SOURCE SELECT allows you to choose between 2-TR IN 1/2 or 2-TR IN 3/4 for monitoring.

4.4 Monitor Selection and Volume

Control which set of studio monitors is active and adjust the overall listening volume.

• Pencét éta MONITOR PILIH buttons (A, B, C) to switch between your connected studio monitor pairs.
• Nu badag VOLUME knob controls the master output level to the selected monitors. This knob utilizes VCA control for precise and accurate level adjustments.
• Pencét éta MONO button to check your mix in mono.
• Pencét éta DIM button to temporarily reduce the monitor volume by a fixed amount.

Gambar 4.1: VCA (Voltage Dikawasa Amplifier) control ensures accurate and consistent volume adjustments.

4.5 Fungsi Talkback

Communicate with artists in the recording booth or other studio areas.

Gambar 4.2: Talkback and Cue controls for studio communication.

• Pencét éta TALKBACK button to activate the internal microphone and speak to the cue mix.
• Saluyukeun TALKBACK volume knob to control the level of your voice in the cue mix.
• An external microphone can be connected to the EXT MIC XLR input on the rear panel for talkback.

4.6 Headphone Monitoring

The STUDIO L provides two independent headphone outputs.

• Connect your headphones to PHONES 1 or PHONES 2 dina panel hareup.
• Sesuaikeun individu VOLUME knobs for each headphone output.
• The CUE SOURCE section allows you to select the source for the headphone mixes (Inputs, Cue, 2-TR Cue).

5. Spésifikasi Téknis

Below are the technical specifications for the Behringer STUDIO L.

6. Perawatan sareng Pangropéa

To ensure the longevity and optimal performance of your Behringer STUDIO L, follow these care and maintenance guidelines:

• beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun bagian luar unit. Hindarkeun pembersih anu abrasif, pangleyur, atanapi lilin, sabab ieu tiasa ngaruksak lapisan sareng kontrol.
• Lingkungan: Operate the device in a clean, dry environment away from direct sunlight, excessive heat, moisture, and dust.
• Ventilasi: Ensure proper ventilation around the unit to prevent overheating. Do not block any ventilation openings.
• Penanganan: Ati-ati dina ngurus alat ieu. Ulah nepi ka muragkeun atawa kakeunaan dampak anu kuat.
• kakuatan: Always disconnect the power adapter from the wall outlet if the unit will be unused for an extended period.

7. Cara ngungkulan

If you encounter issues with your Behringer STUDIO L, refer to the following common troubleshooting steps:

7.1 Taya Daya

• Ensure the power adapter is securely connected to both the STUDIO L and a working electrical outlet.
• Pariksa yén POWER switch on the rear panel is in the ON position.
• Pariksa naha stop kontak listrik berpungsi ku cara nyolokkeun alat sejen.

7.2 Taya Kaluaran Sora

• Check all audio cable connections to your monitors and headphones.
• Pastikeun VOLUME knob on the front panel is turned up.
• Pariksa yén éta leres MONITOR PILIH (A, B, or C) is active for your connected speakers.
• Confirm that the correct input source (e.g., USB, 1/2, 3/4) is selected.
• If using headphones, ensure their individual VOLUME knobs are turned up and the correct CUE SOURCE dipilih.
• For USB audio, check your computer's sound settings to ensure the Behringer STUDIO L is selected as the output device.

7.3 Sora menyimpang

• Ngurangan GAIN jeung TRIM levels for your inputs to prevent clipping, indicated by the red CLIP LED.
• Check the input levels on your computer's DAW or audio software.
• Ensure all cables are in good condition and properly connected.

7.4 Talkback Not Working

• Pastikeun TALKBACK button is pressed and its volume knob is turned up.
• If using an external microphone, ensure it is properly connected to the EXT MIC input and the INT/EXT switch is set to EXT.
• Verify that the cue mix is routed to the headphones or monitors where the artist is listening.

8. Garansi jeung Rojongan

Kanggo inpormasi garansi anu lengkep sareng dukungan téknis, mangga tingal Behringer resmi websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.