ELEGRP 15 Amp Stop Kontak USB Dinding nganggo Port Tipe A & Tipe C

1. Bubuka

This manual provides essential instructions for the safe installation, operation, and maintenance of your ELEGRP 15 Amp USB Wall Outlet. Please read this manual thoroughly before installation and retain it for future reference.

The ELEGRP USB Wall Outlet is designed to provide both standard AC power receptacles and convenient USB charging ports (Type A and Type C) in a single unit. It features tamper-resistant shutters for safety and a dedicated charging port controller for optimized device charging.

2. Émbaran Kasalametan

PERHATOSAN: RISIKO SENGÉRAN ELEKTRIK ATAWA KABURUAN. Pamasangan anu teu leres tiasa nyababkeun tatu parna atanapi maot.

• Installation must be performed by a qualified electrician or a knowledgeable person in accordance with all national and local electrical codes.
• Turn off power at the circuit breaker or fuse box before installing or servicing the outlet.
• Use only copper wire. Do not use with aluminum wire.
• Pastikeun sadaya sambungan kabel aman.
• Do not exceed the electrical ratings of the device.
• Alat ieu kanggo dianggo di jero rohangan wungkul.

3. Eusi Paket

• ELEGRP 15 Amp USB Wall Outlet (Quantity as purchased)
• Matching Wall Plate
• Pamasangan screws
• Instruksi Manual

Image: Multiple ELEGRP 15 Amp USB Wall Outlets, showing the product as packaged.

4. Spésifikasi

Image: Diagram showing the physical dimensions and a summary of product specifications.

5. Instalasi (Setup)

1. Pareuman Daya: Locate the circuit breaker or fuse box controlling the outlet you intend to replace. Turn off the power to that circuit. Verify power is off using a voltage panguji.
2. Hapus Outlet Lama: Unscrew and carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wire connects to which terminal (hot, neutral, ground).
3. Siapkeun Kawat: If necessary, strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the wires. Ensure wires are straight and free of nicks.
4. Sambungkeun kawat: The ELEGRP USB Wall Outlet supports both side wiring and back wiring.
   • Sekrup Héjo: Connect the bare copper or green insulated ground wire to the green screw terminal.
   • Sekrup Pérak: Connect the white (neutral) wire to the silver screw terminal.
   • Sekrup Kuningan: Connect the black (hot) wire to the brass screw terminal.

   Note: All screws are pre-loosened for easier installation.
5. Mount New Outlet: Carefully fold the wires into the electrical box. Insert the new ELEGRP USB Wall Outlet into the box and secure it with the provided mounting screws.
6. Pasang Plat Tembok: Attach the new wall plate over the installed outlet.
7. Mulangkeun Daya: Hurungkeun kakuatan deui dina circuit breaker atawa kotak sekering.
8. Outlet tés: Test both the AC receptacles and the USB ports to ensure proper functionality.

Image: Detailed wiring diagrams for both side and back wire connections.

6. Parentah Operasi

6.1 AC Receptacles

• Insert standard two-prong or three-prong plugs into the AC outlets.
• The tamper-resistant shutters prevent foreign objects from being inserted into the slots, enhancing safety, especially for children.

6.2 Palabuhan Ngecas USB

• Connect your USB-powered devices (e.g., smartphones, tablets, e-readers) to the Type A or Type C USB ports using appropriate charging cables.
• The integrated USB Dedicated Charging Port Controller automatically identifies your device's power requirements and delivers optimal charging current for stable and fast charging.
• The total output for both USB ports is 4.2 Amps at 5V DC. When used individually, the Type C port can provide up to 3.0 Amps, and the Type A port up to 2.4 Amps.

Image: A smartphone connected to the USB Type C port of the outlet, illustrating charging speed.

Image: A visual representation of various devices compatible with the USB charging ports.

7. Pangropéa

• beberesih: Ensure power is off before cleaning. Wipe the surface of the outlet and wall plate with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Pamariksaan: Periodically inspect the outlet for any signs of damage, such as cracks, discoloration, or loose connections. If damage is observed, turn off power and have the outlet inspected and replaced by a qualified electrician.
• Manajemén Panas: The outlet is designed with advanced heat management to ensure cooler and safer operation. Avoid covering the outlet or obstructing airflow around it.

Image: A comparison illustrating the superior heat management of the ELEGRP outlet compared to other models.

8. Cara ngungkulan

• No Power to Outlet/USB Ports:
  • Check the circuit breaker or fuse box to ensure the power is on.
  • Verify that the wiring connections are secure and correct (refer to Section 5).
  • Ensure the device is properly plugged into the AC receptacle or USB port.
• Ngecas USB Lambat:
  • Ensure your device and cable are compatible with fast charging.
  • If multiple devices are charging simultaneously, the total current is shared, which may reduce individual charging speeds.
  • Pastikeun kabel USB henteu ruksak.
• Device Not Recognized by USB Port:
  • Coba kabel USB anu béda.
  • Test with a different device to isolate the issue.

9. Garansi jeung Rojongan

ELEGRP products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or contact ELEGRP customer service directly.

Inpormasi kontak: Please visit the official ELEGRP website or refer to your product packaging for the most current contact details.