1. Bubuka
The FLYLINKTECH CF600 Car Jump Starter is a portable, powerful device designed to start vehicles with dead batteries. It features a 1500A peak current, suitable for gasoline engines up to 8.0 liters and diesel engines up to 6.0 liters. Beyond its primary function, it also serves as a 16000mAh power bank for charging electronic devices and includes a multi-function LED light for various utility purposes. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your jump starter.
Figure 1: FLYLINKTECH Car Jump Starter with smart clamps and charging cables.
2. Émbaran Kasalametan
Please read all safety warnings and instructions carefully before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Always ensure the jump starter is fully charged before use.
- Do not attempt to jump start a vehicle if the jump starter or cables are damaged.
- Nyambungkeun clamps correctly: Red clamp to positive (+) terminal, Black clamp to negative (-) terminal. Reverse polarity can cause damage.
- Ulah nyambungkeun cl positif jeung negatifamps babarengan.
- Jauhkeun tina jangkauan barudak.
- Entong ngalaan produk kana kaayaan hujan atanapi baseuh.
- Ulah ngabongkar unit. Rujuk sadayana jasa ka tanaga anu mumpuni.
- Ensure the vehicle's ignition is off before connecting the jump starter.
- Remove the jump starter from the vehicle battery within 30 seconds after the engine starts.
- Fitur alat 8 Smart Safe Clamp Panyalindungan, including reverse polarity, overcharge, short circuit, high temperature, over voltage, and over current protection. However, always exercise caution.
Figure 2: Intelligent clamps with built-in safety features for protection against common errors.
3. Eusi Paket
Pastikeun yén sadaya item aya dina bungkusan:
- FLYLINKTECH Car Jump Starter Unit
- Smart Jumper Clamps (Beureum jeung Hideung)
- Kabel Ngecas USB
- EC5 Female Adapter
- Manual Pamaké (Dokumén ieu)
- Panyimpenan Case
4. Produk Langkungview
The FLYLINKTECH Car Jump Starter is a versatile device designed for emergency vehicle starting and portable power.
Fitur konci:
- Mimitian Luncat anu Kuat: 1500A peak current, capable of starting 12V vehicles with up to 8.0L gasoline or 6.0L diesel engines.
- Bank Daya Portabel: 16000mAh capacity with two USB ports, including one QC3.0 port for fast charging mobile phones, tablets, and other USB-powered devices.
- Multi-Function LED Light: Features Torch, SOS, Quick Flash, and Blue & Red Flashing modes for illumination and emergency signaling.
- Smart Safety Clamps: Equipped with 8 intelligent protections: reverse polarity, overcharge, short circuit, high temperature, over voltage, and over current.
- EC5 Adapter and Safety Hammer: Includes an EC5 female adapter for powering 12V car accessories (e.g., car cleaner, air pump) and a built-in safety hammer for emergency window breaking.
- Kompak sareng Ringan: Weighs approximately 1kg with dimensions of 18.5 x 9.5 x 4.5 cm, making it easy to store and carry.
Figure 3: Compact dimensions and lightweight design of the jump starter.
Figure 4: Engine compatibility for the 1500A peak current jump starter.
5. Persiapan sareng Pangisian Daya Awal
Before first use, fully charge the jump starter.
- Connect the provided USB charging cable to the jump starter's input port.
- Connect the other end of the USB cable to a 5V/2A or higher USB wall adapter (not included) or a computer USB port.
- The LED indicator lights on the jump starter will illuminate to show the charging progress. All four lights will be solid when fully charged.
- A full charge typically takes several hours. It is recommended to charge the unit every 3-6 months to maintain battery health, even if not in use.
6. Parentah Operasi
6.1. Ngahurungkeun Kandaraan sacara Langsung
Ensure the jump starter is sufficiently charged (at least 3-4 indicator lights).
- Nyiapkeun Kendaraan: Turn off the vehicle's ignition and all electrical loads (headlights, radio, air conditioning, etc.). Engage the parking brake.
- Sambungkeun Clamps ka Jump Starter: Pasangkeun colokan biru tina jumper pinteramps into the jump starting port on the jump starter unit. Ensure it is fully inserted. The indicator light on the clamps should flash green and red, indicating it's ready.
- Sambungkeun Clamps ka Batré:
- Nyambungkeun BEureum (+) clamp ka terminal positif (+) batré kendaraan.
- Nyambungkeun HIDEUNG (-) clamp ka terminal négatif (-) batré kandaraan.
- Mimitian Kendaraan: Return to the vehicle and start the engine within 30 seconds.
- Leupaskeun Clamps: Once the engine starts, immediately remove the clamptina batré kendaraan, teras pegatkeun sambungan clamps tina unit jump starter.
Figure 5: Step-by-step guide for jump starting a vehicle.
6.2. Ngagunakeun salaku Power Bank
Jump starter ieu tiasa ngecas rupa-rupa alat éléktronik ngalangkungan port kaluaran USB-na.
- Sambungkeun kabel ngecas USB alat anjeun ka salah sahiji port kaluaran USB dina jump starter.
- Connect the other end of the cable to your electronic device (e.g., smartphone, tablet, Bluetooth speaker).
- The jump starter will automatically begin charging your device. The QC3.0 port offers faster charging for compatible devices.
Figure 6: The jump starter's power bank functionality and EC5 adapter use.
6.3. Ngagunakeun Lampu LED
Lampu LED internal nawiskeun sababaraha modeu pikeun kaayaan anu béda.
- Press and hold the power button for 3 seconds to turn on the LED light (Torch mode).
- Press the power button briefly to cycle through the modes: Torch → SOS → Quick Flash → Blue & Red Flash → Off.
- Press and hold the power button again for 3 seconds to turn off the LED light from any mode.
Figure 7: The multi-function LED light in operation, illustrating its various modes.
7. Pangropéa
Proper maintenance ensures the longevity and optimal performance of your jump starter.
- Ngecas: Recharge the unit after each use. If not used frequently, recharge every 3-6 months to prevent deep discharge and extend battery life.
- beberesih: Lap unitna ku lawon anu lemes sareng garing. Entong nganggo bahan kimia anu keras atanapi pembersih anu abrasif.
- Panyimpenan: Store the jump starter in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures. Keep it in its provided storage case for protection.
- Perawatan batré: The internal lithium-ion battery is not user-replaceable. Do not attempt to open the unit.
8. Cara ngungkulan
If you encounter issues with your FLYLINKTECH Car Jump Starter, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Jump starter teu hurung. | Batré discharged lengkep. | Cas jump starter nepi ka pinuh. |
| Kandaraan henteu ngamimitian saatos nyambungkeun. |
|
|
| Cl pinteramps indicator light flashes red or beeps. | Reverse polarity, short circuit, or other connection error. | Pegatkeun sambungan clamps immediately. Reconnect ensuring RED to (+) and BLACK to (-). Ensure clamps do not touch each other. |
| Ngecas USB teu jalan. |
|
|
9. Spésifikasi
| Fitur | Rincian |
|---|---|
| Modél | CF600 |
| Puncak Kaluaran Ayeuna | 1500 Amps |
| Kapasitas batré | 16000 mAh (Litium Ion) |
| Mimitian Voltage | 12V |
| Kasaluyuan engine | Nepi ka 8.0L Bensin, Nepi ka 6.0L Solar |
| Kaluaran USB 1 | 5V / 2.4A, 12W |
| Kaluaran USB 2 (QC3.0) | 5V/3A, 9V/2A, 12V/1.5A |
| DC Output (EC5 Adapter) | 12-16V, 59.2W |
| Ukuran produk (L x W x H) | 18.5 x 9.5 x 4.5 cm |
| Item Beurat | 1 kg |
Catetan: Spésifikasi tiasa robih tanpa aya bewara.
10. Garansi jeung Rojongan
FLYLINKTECH products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official FLYLINKTECH websitus.
When contacting support, please have your product model number (CF600) and purchase details readily available.
