VOLTCRAFT VC-11889355 Vol 2-Kutubtage Manual Pamaké Tester

1. Bubuka

The VOLTCRAFT VC-11889355 is a robust 2-pole voltage tester designed for reliable verification of voltage in electrical installations. Manufactured and tested according to EN 61243-3:2010 and VDE0682 standards, this device provides clear voltage indication via bright LEDs (12 - 690 V) and an LCD display for the actual effective value. It incorporates various functions for comprehensive electrical testing.

2. Émbaran Kasalametan

Always adhere to local safety regulations and guidelines when working with electrical systems. This device is designed for professional use and requires a basic understanding of electrical principles.

• Rated Categories: This tester is rated for CAT III 1000 V and CAT IV 600 V. Ensure the measurement category matches or exceeds the environment you are working in.
• Pamariksaan: Before each use, inspect the tester for any signs of damage to the housing, cables, or test probes. Do not use if damaged.
• Voltage Watesan: Ulah ngaleuwihan vol maksimumtagrating anu ditangtukeun pikeun alat éta.
• Alat Pelindung Pribadi: Always wear appropriate personal protective equipment (PPE), such as insulated gloves and safety glasses, when performing electrical measurements.
• Sirkuit Hirup: Assume all circuits are live until proven otherwise.
• Ngagantian batré: Ensure the device is disconnected from all voltage sources before opening the battery compartment.

3. Produk Langkungview

3.1 Komponén

The VOLTCRAFT VC-11889355 voltage tester consists of two main units connected by a flexible cable, along with interchangeable test probes.

Gambar 1: Hareupeun view of the VOLTCRAFT VC-11889355 2-Pole Voltage Tester. This image shows the main unit with the LCD display, LED indicators for voltage ranges, and control buttons. The secondary probe is connected via a flexible cable.

Gambar 2: Balik deui view of the VOLTCRAFT VC-11889355 2-Pole Voltage Tester. This view displays the product label with safety ratings, certifications, and model information.

Gambar 3: The VOLTCRAFT VC-11889355 2-Pole Voltage Tester shown with its included accessories, which typically include protective caps for the probes and batteries for operation.

4. Setélan

4.1 Pamasangan batré

The device requires batteries for operation. Ensure correct polarity during installation.

Gambar 4: Pahareup-hareup view of the battery compartment on the VOLTCRAFT VC-11889355 tester, indicating where batteries are inserted and their correct orientation.

1. Ensure the tester is disconnected from all electrical circuits.
2. Locate the battery compartment cover, typically on the back or side of the main unit.
3. Use a suitable tool (e.g., a screwdriver) if necessary to open the cover.
4. Insert the required batteries (e.g., AAA batteries) according to the polarity markings (+/-) inside the compartment.
5. Tutup panutup kompartemen batréna.

5. Parentah Operasi

This section details the various measurement functions of the VOLTCRAFT VC-11889355 voltage panguji.

5.1 JilidtagPangukuran (AC/DC)

• Connect both test probes to the circuit to be measured.
• Voltage will be indicated by bright LEDs in ranges from 12 V to 690 V.
• The precise effective value will be displayed on the LCD with backlight.
• The tester supports measurements up to 1000 V AC and 1200 V DC.

5.2 Tés Continuity

• Pastikeun sirkuit parantos dipareuman énergina sateuacan ngalaksanakeun tés kontinuitas.
• Connect the two test probes across the component or circuit path you wish to test.
• An audible signal and/or visual indication on the display will confirm continuity.

5.3 RCD (FI) Test Function

• This function allows testing of Residual Current Devices (RCDs).
• Follow specific instructions in the full manual for safe and effective RCD testing, as this typically involves applying a load to trip the RCD.

5.4 Single-Pole Phase Test

• To identify a live phase conductor, touch only one test probe (usually the L1 probe) to the conductor.
• The tester will indicate the presence of a phase voltage, typically through an LED or display symbol.

5.5 Phase Order Display

• For three-phase systems, this function helps determine the correct phase rotation.
• Connect the probes to the phases as indicated by the device. The display will show the phase order.

5.6 Résistansi Ukur

• Pastikeun sirkuit geus dipareuman énergina sateuacan ngukur résistansi.
• Connect the test probes across the component whose resistance you wish to measure.
• The resistance value will be displayed on the LCD.

5.7 Integrated Measurement Point Illumination

• The tester includes a built-in light to illuminate the measurement point in dimly lit environments.
• Activate this feature using the designated button on the device.

5.8 Geter Alarm

• In addition to audible and visual indicators, the device features a vibration alarm to alert the user to the presence of voltage, especially useful in noisy environments.

6. Pangropéa

6.1 beberesih

• Clean the device regularly with a dry, lint-free cloth.
• Ulah make cleaners abrasive atawa pangleyur.

6.2 Ngagantian batré

• Replace batteries when the low battery indicator appears on the display or if the device does not power on.
• Tingali Bagian 4.1 kanggo parentah pamasangan batré.
• Buang batré anu dipaké nurutkeun peraturan lokal.

7. Cara ngungkulan

This section addresses common issues you might encounter with your voltage panguji.

8. Spésifikasi Téknis

9. Garansi jeung Rojongan

For warranty information, technical support, or service inquiries regarding your VOLTCRAFT VC-11889355 2-Pole Voltage Tester, please refer to the documentation included with your purchase or contact VOLTCRAFT customer service directly. Contact details can typically be found on the manufacturer's official websitus atanapi dina bungkusan produk.