1. Bubuka
This manual provides essential information for the safe and effective use of your glo HYPER+ heated tobacco device. The glo HYPER+ offers a versatile experience with both normal and high-temperature modes, allowing for personalized usage. Please read this manual thoroughly before using the device.
Catetan penting: This product includes the electronic tobacco device only. It does not contain liquid or nicotine, nor does it include tobacco sticks (neostiks).
2. Eusi Paket
Verify that all items listed below are included in your package. According to the product packaging, the contents are:
- glo HYPER+ Device (Main Unit)
- Kabel Ngecas USB
- Sikat beberesih
- Manual Pitunjuk (dokumén ieu)
Note: Tobacco sticks (e.g., neostiks) are not included and must be purchased separately.
Image: The glo HYPER+ Starter Kit packaging, indicating the included items.
3. Setélan
3.1 Ngecas Awal
- Connect the provided USB charging cable to the charging port on the bottom of the glo HYPER+ device.
- Colokkeun tungtung kabel USB anu sanésna kana adaptor daya USB anu cocog (henteu kalebet) atanapi kana port USB komputer.
- The LED indicator lights on the device will illuminate to show the charging status. A full charge typically takes approximately 90 minutes.
- Once fully charged, all LED indicators will be solid. Disconnect the device from the charger.
Catetan: For optimal battery life, it is recommended to fully charge the device before its first use.
4. Parentah Operasi
4.1 Inserting a Tobacco Stick
- Open the top cap of the glo HYPER+ device.
- Gently insert a compatible tobacco stick into the heating chamber until it reaches the bottom. Do not force the stick.
- Close the top cap.
4.2 Ngahurungkeun sareng Pemanasan
The glo HYPER+ offers two heating modes: Standard and Boost.
- Modeu standar: Press and hold the control button for approximately 3 seconds until the device vibrates and the LED indicators begin to light up sequentially. The device will heat for about 20 seconds.
- Boost Mode (High Temperature): Press and hold the control button for approximately 5 seconds until the device vibrates twice and the LED indicators light up more rapidly. The device will heat for about 15 seconds, providing a more intense experience.
Once heating is complete, the device will vibrate again, and the LED indicators will remain solid, indicating it is ready for use.
4.3 Ngagunakeun Alat
Inhale gently through the tobacco stick. Each session lasts approximately 4 minutes in Standard mode and 3 minutes in Boost mode, or until the device vibrates and the LED indicators turn off.
4.4 Ending a Session
- When the session ends, the device will vibrate, and the LED indicators will turn off.
- Open the top cap and carefully remove the used tobacco stick. Dispose of it properly.
- Close the top cap to prevent debris from entering the heating chamber.
Gambar: A close-up view of the glo HYPER+ device, highlighting its design and control button.
5. Pangropéa
Regular cleaning ensures optimal performance and longevity of your glo HYPER+ device.
5.1 Cleaning the Heating Chamber
- Ensure the device is completely cooled down before cleaning.
- Open both the top and bottom caps of the device.
- Insert the provided cleaning brush into the heating chamber from both ends (top and bottom) and gently rotate it to remove any residue.
- Tap the device gently to dislodge any loose debris.
- Close both caps after cleaning.
Rekomendasi: Clean your device after every 20 sessions or as needed to maintain optimal flavor and airflow.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat teu hurung. | batré lemah. | Ngecas alat nganggo kabel USB anu disayogikeun. |
| No vapor or weak vapor production. | Incorrectly inserted tobacco stick, device not fully heated, or dirty heating chamber. | Ensure the tobacco stick is fully inserted. Wait for the device to complete heating. Clean the heating chamber. |
| Alat teu ngecas. | Kabel lepat atanapi sumber listrik. | Cobi kabel USB atanapi adaptor daya anu béda. Pastikeun sambunganna aman. |
| Paranti overheating. | Continuous use or environmental factors. | Allow the device to cool down. Avoid using in direct sunlight or hot environments. If the issue persists, discontinue use and contact support. |
Upami anjeun mendakan masalah anu teu didaptarkeun di dieu atanapi upami masalahna teras-terasan saatos nyobian solusi, mangga ngahubungi dukungan palanggan.
7. Spésifikasi
- model: HYPER+
- merek: glo
- Ukuran (Packing): 11.1 x 8.6 x 7.2 cm
- Beurat (bungkusan): 310 g
- warna: emas
- Komponén Kaasup: Main unit, USB charging cable, cleaning brush, instruction manual
- Modeu pemanasan: Standard, Boost (High Temperature)
- Tanggal munggaran sayogi: 2021/11/23
8. Garansi jeung Rojongan
For warranty information, product support, or to report any issues, please refer to the official glo websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen bukti pameseran anjeun pikeun klaim garansi.
