IMEX ETNA Wall-Mounted Basin Manual Pamaké Keran

1. Bubuka

Thank you for choosing the IMEX ETNA Wall-Mounted Basin Faucet. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new faucet. Please read this manual thoroughly before installation and keep it for future reference.

The IMEX ETNA faucet is a high-quality mixer designed for wall mounting in basins or bathtubs. It is constructed from durable S316 stainless steel, offering superior resistance to corrosion and high temperatures, ensuring long-lasting performance and a sleek aesthetic.

2. Émbaran Kasalametan

• Always ensure that installation is performed by a qualified professional to prevent damage or injury.
• Pareuman suplai cai utama sateuacan ngamimitian pamasangan atanapi pangropéa.
• Pastikeun sadaya sambungan aman sareng kedap cai pikeun nyegah bocor.
• Do not use abrasive cleaners or harsh chemicals on the faucet's surface, as this may damage the finish.
• Protect the product from extreme temperatures and direct impact.
• The S316 stainless steel material is highly resistant to corrosion, but proper care is still essential for maintaining its appearance.

3. Produk Langkungview

The IMEX ETNA faucet features a minimalist design with two independent components: the spout and the mixer handle. This allows for flexible installation and a clean, integrated look.

Gambar 3.1: Hareupeun view of the IMEX ETNA wall-mounted faucet, showing the curved spout and the separate mixer handle.

Figure 3.2: The IMEX ETNA faucet installed above a modern white basin, demonstrating its wall-mounted application and sleek appearance.

komponén:

• Spout: The water outlet, designed for wall mounting.
• Mixer Handle: Controls water temperature and flow.
• Hardware dipasang: Necessary components for secure wall installation.

The faucet's dimensions are approximately 21.9 cm (8.6 inches) in length for the spout and 8 cm (3.1 inches) in diameter at its base. The finish is a natural chrome-like appearance derived from the S316 stainless steel material.

4. Setup jeung Instalasi

This faucet is designed for wall-mounted installation. No special registration box is required for its setup, simplifying the process. Professional installation is highly recommended.

Pakakas sareng Bahan (Teu Kalebet):

• rengkuh adjustable
• Obeng
• Pita ukur
• Tingkat
• Bor
• Pita perekat (pita Teflon)

Léngkah-léngkah pamasangan:

1. Nyiapkeun Tembok: Ensure the wall surface is clean, dry, and structurally sound. Mark the desired positions for the spout and mixer handle, considering the plumbing connections.
2. Install Rough-in Plumbing: Connect the hot and cold water lines to the appropriate rough-in valves within the wall. Ensure these are securely fastened and leak-free.
3. Mount the Spout: Insert the spout assembly into its designated wall opening. Secure it firmly using the provided mounting hardware. Ensure it is level and properly aligned.
4. Mount the Mixer Handle: Insert the mixer handle assembly into its wall opening. Connect it to the hot and cold water lines and secure it with the mounting hardware.
5. Sambungkeun komponén: Ensure all internal connections between the spout and mixer are correctly made according to plumbing standards.
6. Uji pikeun Bocor: Slowly turn on the main water supply and check all connections for any signs of leaks. Tighten connections as necessary.
7. Cék ahir: Verify proper water flow and temperature control.

Figure 4.1: Technical drawing illustrating the dimensions and internal structure of the IMEX ETNA faucet components for installation reference.

Gambar 4.2: Overhead view of the IMEX ETNA faucet installed with a basin, providing a perspective on its spatial requirements and design integration.

5. Parentah Operasi

The IMEX ETNA faucet is operated using a single mixer handle, allowing for easy control of both water temperature and flow.

• Hurungkeun/Pareuman: Lift the handle to turn on the water flow. Push it down to turn off the water.
• Nyaluyukeun Aliran: The salajengna anjeun angkat gagang, nu gede aliran cai.
• Nyaluyukeun Suhu: Swivel the handle left for hot water and right for cold water. The central position provides mixed water.
• Fitur Hemat Cai: This faucet is equipped with a water-saving system. You may notice a slight resistance when lifting the handle past a certain point, indicating a reduced flow rate for water conservation. Pushing past this point will provide full flow.

6. Pangropéa sarta perawatan

Proper maintenance will ensure the longevity and aesthetic appeal of your IMEX ETNA faucet.

• Ngabersihan rutin: Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive liquid cleaner. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
• Hindarkeun Pembersih Kasar: Do NOT use abrasive cleaners, scouring pads, ammonia-based cleaners, bleach, or any cleaners containing alcohol or organic solvents, as these can damage the stainless steel finish.
• Deposit Mineral: For hard water areas, mineral deposits may accumulate. Use a solution of vinegar and water (1:1 ratio) applied with a soft cloth, then rinse and dry.
• Pariksa bocor: Pariksa périodik sadaya sambungan pikeun tanda-tanda bocor. Atur sagala bocor geuwat pikeun nyegah karuksakan cai.

7. Cara ngungkulan

Upami anjeun mendakan masalah sareng keran anjeun, tingal masalah sareng solusi umum ieu:

If the problem persists after attempting these solutions, please contact a qualified plumber or the manufacturer's customer support.

8. Spésifikasi

9. Garansi jeung Rojongan

For information regarding the product warranty, please refer to the terms and conditions provided at the time of purchase or contact your retailer. Typically, products are covered against manufacturing defects for a specified period.

If you require technical assistance, have questions about installation, or need to report a defect, please contact the seller or manufacturer directly. Keep your purchase receipt and product model number (GLT023/AC) handy when contacting support.