Reloop RP-7000 MK2 Direct Drive High Torque Turntable Instruction Manual

1. Bubuka

This manual provides essential information for the safe and efficient operation of your Reloop RP-7000 MK2 Direct Drive High Torque Turntable. Please read these instructions thoroughly before using the product to ensure proper setup, optimal performance, and longevity of your equipment. Keep this manual for future reference.

2. Parentah Kasalametan

• Sasayogian tanaga: Sambungkeun unit ngan ka stop kontak AC tina vol nu dieusiantage. Pastikeun kabel listrik teu ruksak atanapi kajepit.
• Uap: Do not expose the unit to rain, moisture, or excessive humidity. Avoid placing liquid-filled objects on the turntable.
• Ventilasi: Pastikeun ventilasi nyukupan di sabudeureun unit. Ulah meungpeuk bukaan ventilasi.
• panempatan: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong magnetic fields.
• beberesih: Disconnect the power before cleaning. Use a soft, dry cloth. Avoid liquid cleaners or solvents.
• Palayanan: Ulah nyobian ngalereskeun unit ieu nyalira. Serahkan sadaya perawatan ka tanaga anu mumpuni.

3. Eusi Paket

Pariksa yén sadaya barang anu didaptarkeun di handap ieu kalebet dina pakét anjeun. Upami aya barang anu leungit atanapi ruksak, langsung hubungi dealer anjeun.

• Reloop RP-7000 MK2 Direct Drive High Torque Turntable (x2)
• Panutup Kekebul (x2)
• Digital Turntable Stylus Scale
• Record Care Solution
• Kabel Daya
• RCA Kabel
• Lemah Kawat
• Slipmat
• counterweight
• Headshell with Cartridge (pre-mounted or separate, depending on region/bundle)

Gambar 1: Leuwihview of the Reloop RP-7000 MK2 turntable bundle components.

4. Setélan

4.1 Ngabongkar sareng Nempatkeun

1. Cabut sadaya komponén tina bungkusna kalayan ati-ati. Simpen bungkusna kanggo diangkut ka hareup.
2. Place the turntable on a flat, stable, and vibration-free surface. Ensure there is enough space for the dust cover to open fully.
3. Attach the dust cover by aligning its hinges with the slots on the turntable's rear.

Gambar 2: Turntable with the dust cover in place.

4.2 Platter and Slipmat Installation

1. Carefully place the platter onto the center spindle. Ensure it sits flush.
2. Teundeun slipmat dina luhureun piring.

4.3 Tonearm jeung Cartridge Setup

1. If not pre-mounted, attach the headshell with the cartridge to the tonearm. Secure it by turning the locking ring.
2. Screw counterweight kana pungkur tonearm nu.
3. Saimbang Tonearm: Ngaleupaskeun tonearm clamp. Adjust the counterweight until the tonearm is perfectly balanced and floats horizontally.
4. Atur gaya nyukcruk: Return the tonearm to its rest and clamp it. Rotate the numbered ring on the counterweight to '0' without moving the counterweight itself. Then, rotate the entire counterweight to the recommended tracking force for your cartridge (typically 2-4 grams for DJ cartridges).
5. Set Anti-Skate: Adjust the anti-skate dial to match the tracking force setting.

4.4 Using the Digital Stylus Scale

The included digital stylus scale allows for precise measurement of your cartridge's tracking force, ensuring optimal sound quality and minimizing record wear.

1. Place the stylus scale on the platter.
2. Hurungkeun skala nganggo tombol daya.
3. Carefully lower the stylus onto the designated measuring point on the scale.
4. Read the tracking force displayed. Adjust the tonearm's counterweight as needed until the desired force is achieved.

Gambar 3: Digital Stylus Scale for precise tracking force measurement.

4.5 Sambungan

1. Kaluaran Audio: Connect the RCA cables from the turntable's audio output to the PHONO input of your mixer or amplifier. If your mixer/amplifier does not have a PHONO input, you will need an external phono preamppangagung.
2. Kawat taneuh: Connect the ground wire from the turntable to the ground terminal on your mixer or amplifier pikeun ngurangan hum.
3. kakuatan: Connect the power cable to the turntable and then to a suitable AC power outlet.

5. Parentah Operasi

5.1 Playback Dasar

1. Place a record on the slipmat.
2. Select the appropriate speed (33, 45, or 78 RPM) using the speed selector buttons.
3. Pencét éta Mimitian / STOP tombol pikeun ngamimitian rotasi pelat.
4. Carefully lift the tonearm using the cueing lever and position the stylus over the desired groove on the record.
5. Turunkeun tuas isyarat pikeun neundeun stylus kana piringan hideung.
6. To stop playback, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the Mimitian / STOP kancing.

Gambar 4: Turntable platter and control layout.

5.2 Pitch Control

The pitch fader allows you to adjust the playback speed (BPM) of the record. Move the fader up or down to increase or decrease the pitch. The pitch range can be selected using the range buttons (e.g., +/- 8%, 16%, 50%).

5.3 Fungsi Tibalik

The RP-7000 MK2 features a reverse playback function. Press the BALIKAN button to change the direction of platter rotation. Press it again to return to normal playback.

6. Pangropéa

6.1 Ngabersihan Turntable

• Salawasna pegatkeun sambungan kakuatan saméméh beberesih.
• Use a soft, dry, lint-free cloth to wipe the surface of the turntable and dust cover.
• Ulah make cleaners abrasive, pangleyur, atawa sprays kimiawi, sabab ieu bisa ngaruksak finish.

6.2 Kamanusaan sarta Studi Stylus

• Gently brush the stylus from back to front using a soft stylus brush to remove dust and debris.
• Hindarkeun noél stylus ku ramo anjeun.

6.3 Kamanusaan sarta Studi Rékam

The included record care solution helps maintain the quality of your vinyl records and prolong their lifespan.

1. Apply a small amount of record care solution to a clean, soft, lint-free cloth or a dedicated record cleaning brush.
2. Gently wipe the record surface in a circular motion, following the grooves.
3. Allow the record to dry completely before playing.

Gambar 5: Record Care Solution for maintaining vinyl quality.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

Reloop products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Reloop website. For technical support or service inquiries, please contact your authorized Reloop dealer or distributor.

Pabrikan: Reloop

Titimangsa munggaran sadia: 8 Juli 2022