Hewlett Packard Enterprise Aruba 6000 12G Class4 PoE 2G/2SFP 139W Managed L3 Gigabit Ethernet Switch User Manual

1. Bubuka

This manual provides essential information for the installation, operation, and maintenance of your Hewlett Packard Enterprise Aruba 6000 12G Class4 PoE 2G/2SFP 139W Managed L3 Gigabit Ethernet Switch. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

2. Émbaran Kasalametan

Observe the following safety precautions to prevent damage to the device or injury to personnel:

• Pastikeun grounding-na bener sateuacan nyambungkeun daya.
• Do not operate the device in environments exceeding 40 degrees Celsius.
• Anggo ngan ukur adaptor daya sareng kabel anu ditangtukeun.
• Ulah meungpeuk bukaan ventilasi pikeun nyegah overheating.
• Ulah nyobian muka atawa ngalereskeun alat sorangan. Rujuk sadayana jasa ka tanaga anu mumpuni.

3. Eusi Paket

Pariksa yén pakét anjeun ngandung barang-barang ieu:

• Hewlett Packard Enterprise Aruba 6000 Switch (Model R8N89A)
• Kabel listrik
• Pakakas Pasang Rak (upami aya)
• Dokuméntasi (Panduan Mimitian Gancang, Inpormasi Kasalametan)

4. Produk Langkungview

4.1 Layout Panel hareup

The front panel of the Aruba 6000 switch provides various ports and LED indicators for network connectivity and status monitoring.

Image: Front panel of the HPE Aruba 6000 switch, showing various ports and LED indicators.

Komponen Panel Hareup:

• PoE1 Indicator: Indicates Power over Ethernet status for the device.
• R8N89A Label: Product model number and electrical specifications (57Vmax | 0.3A).
• 2p 1G SFP Ports (15, 16): Two 1 Gigabit Small Form-Factor Pluggable ports for fiber optic connections.
• 2p 1G BASE-T Ports (13, 14): Two 1 Gigabit Ethernet ports for copper connections.
• 12p 1G BASE-T Ports (1A-12): Twelve 1 Gigabit Ethernet ports for copper connections.
• UID (Unit Identification) LED: Helps locate the switch in a rack.
• Spd (Speed) LED: Indicates port speed status.
• PoE (Power over Ethernet) LED: Indicates PoE status for individual ports.
• Port Aux: Auxiliary USB port.
• Tombol Modeu LED: Toggles LED display modes.
• Port konsol: USB-C console port for local management.
• Tombol Reset: Resets the device to factory defaults or reboots.

4.2 Indikator LED

The front panel LEDs provide visual status of the switch's operation:

• Spd LED:
  • Flashing: Not maximum speed.
  • Solid: Maximum speed.
• LED PoE:
  • Flashing: Fault/Over budget.
  • Solid: PoE enabled.

5. Setélan

5.1 Instalasi fisik

1. Pamasangan rak: Secure the switch in a standard 19-inch equipment rack using the provided rack mount kit. Ensure adequate space for airflow around the device.
2. Sambungan Daya: Connect the power cord to the switch's power inlet and then to a grounded AC power outlet.
3. Sambungan jaringan: Connect network cables (Ethernet or fiber) to the appropriate ports on the front panel.

5.2 Konfigurasi Awal

1. Console Access: Connect a computer to the switch's console port using a USB-C cable. Use a terminal emulation program (e.g., PuTTY, Tera Term) with the following settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
2. Lebet: Follow the on-screen prompts to log in. Default credentials are typically provided in the Quick Start Guide.
3. Setup Dasar: Configure essential network parameters such as IP address, subnet mask, and default gateway.

6. Parentah Operasi

Once the switch is physically installed and initially configured, it will begin forwarding network traffic. For advanced configurations and management, refer to the comprehensive software configuration guide available on the Hewlett Packard Enterprise support websitus.

• Fungsi PoE: The switch automatically detects and powers PoE-compatible devices connected to its PoE-enabled ports. Monitor PoE status via the front panel LEDs.
• Layer 3 Features: As a Managed L3 switch, it supports advanced routing and network segmentation features. These are configured via the command-line interface (CLI) or webpanganteur manajemén basis.

7. Pangropéa

• beberesih: Periodically clean the exterior of the switch with a soft, dry cloth. Ensure ventilation openings are free from dust and debris.
• Pembaruan firmware: Regularly check the Hewlett Packard Enterprise support website for firmware updates. Keeping the firmware current ensures optimal performance and security.
• Cadangan Konfigurasi: Regularly back up your switch configuration to an external storage device or network location.

8. Cara ngungkulan

If you encounter issues with your switch, consider the following troubleshooting steps:

• Henteu aya kakuatan: Verify the power cord is securely connected and the power outlet is functional. Check the power LED on the switch.
• Henteu aya konektipitas jaringan: Check cable connections, port LEDs (Spd and PoE), and ensure correct network configuration.
• Alat PoE Henteu Diaktipkeun: Verify the device is PoE-compatible. Check the PoE LED for faults or over-budget conditions. Ensure the switch's PoE budget is not exceeded.
• Performance Lambat: Check for network congestion, cable quality, and port speed settings. Refer to the Spd LED.
• Pabrik Reset: If all else fails, press and hold the Reset button for a specified duration (refer to the Quick Start Guide for exact timing) to restore factory default settings. This will erase all configurations.

9. Spésifikasi

10. Garansi jeung Rojongan

For warranty information, technical support, and additional resources, please visit the official Hewlett Packard Enterprise support website or contact their customer service. Keep your purchase receipt and product serial number handy for any support inquiries.

Hewlett Packard Enterprise Support: www.hpe.com/us/en/support.html