Bubuka
This manual provides detailed instructions for assembling, operating, and maintaining your KiwiCo Remote Controlled Snake Robot. This kit is designed to introduce principles of robotics and electronics through hands-on construction and interactive play. Please read all instructions carefully before beginning assembly.
Daptar bagian
Before starting assembly, verify that all components are present in your kit:
- Wood head
- Wood body pieces
- Klip samping
- Connector clips
- sekrup
- Batang logam
- Wood beads
- Kabayang
- O-cingcin
- Dasi seleting
- Toggle bases
- Toggle covers
- Kotak kadali jauh
- Karét geulang
- Thick gray sticky foam
- Thin gray sticky foam
- Black sticky foam
- Maze pieces
- Wood tongues
- Bal
- Robot skins
One 9V battery is required and included with the kit.
Image: All components of the KiwiCo Remote Controlled Snake Robot kit are displayed on a yellow background, including the partially assembled snake body, remote control, various wooden pieces, and decorative skins.
Setup sareng Majelis
Follow the included illustrated directions for step-by-step assembly of your snake robot and its remote control. The assembly process involves wiring electronics and constructing the mechanical body.
Léngkah-léngkah Majelis Utama:
- Assemble and wire the electronic components that power the robot.
- Construct the segmented body of the snake robot using the provided wood pieces, clips, and rods.
- Build the remote control box and connect the toggle switches.
- Attach the chosen decorative skin to customize your robot.
- Insert the 9V battery into the designated compartment.
Image: The fully assembled red and black snake robot is shown alongside its blue remote control, ready for operation.
Parentah Operasi
Once assembled, your Remote Controlled Snake Robot is ready for operation. The remote control uses switches to direct the robot's movement.
Operasi Remote Control:
- Turn the remote control ON using the switch located on the front.
- Use the left and right toggle switches to control the snake's movement. Experiment with different switch combinations to understand how the robot slithers and turns.
- The robot's movement is based on how electricity powers its segments and how the switches engage different motors.
Image: A pair of hands demonstrates operating the blue remote control, manipulating the yellow toggle switches to direct the snake robot.
Navigation Challenge:
The kit includes maze pieces to set up a navigation challenge. Follow these steps:
- Arrange the maze pieces on a flat surface to create a path for your robot.
- Attach one of the wood tongues to the front of the snake's head.
- Practice driving your robot through the maze, aiming to navigate without hitting the foam strips.
- For an added challenge, use the ball and attempt to push it through the maze with the snake's tongue.
Image: The snake robot, with a clear skin, is shown navigating a simple maze constructed from black foam pieces on a wooden floor.
Video Demonstrasi:
Video: This video demonstrates the KiwiCo Remote Controlled Snake Robot in action, showcasing its slithering movement and how the remote control switches operate it. It highlights the hands-on building and the science behind its motion.
Pangropéa
To ensure the longevity and proper function of your snake robot, consider the following maintenance tips:
- Ngagantian batré: Replace the 9V battery when the robot's movements become sluggish or unresponsive.
- beberesih: Gently wipe the robot's surfaces with a dry cloth to remove dust or debris. Avoid using liquids directly on electronic components.
- Panyimpenan: Store the robot and its components in a dry, cool place away from direct sunlight to prevent material degradation.
- Pariksa komponén: Periodically inspect connections and moving parts for any signs of wear or looseness. Tighten screws or re-secure connections as needed.
Pamérésan masalah
If you encounter issues with your KiwiCo Remote Controlled Snake Robot, refer to the following troubleshooting guide:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Robot does not move | Battery is dead or incorrectly installed. Loose wire connections. Power switch is OFF. | Replace the 9V battery. Check all wire connections for secure fit. Ensure the ON/OFF switch on the remote is in the ON position. |
| Robot only moves in circles or steers poorly | One side's motor or switch is not functioning correctly. Uneven wheel or segment assembly. | Verify all switch connections are secure and functional. Inspect the assembly of each snake segment and wheels for proper alignment and free movement. Ensure no wires are pinched. |
| Tombol kadali jauh henteu ngaréspon | Loose connections within the remote. Damaged switch. | Open the remote control box and check all internal wire connections to the switches. If a switch appears damaged, contact support. |
spésifikasi
- Jumlah modél: SNAK-F2009
- Ukuran produk: 11 x 7.5 x 3.38 inci
- Beurat barang: 1.57 pon
- Umur Disarankeun: 9 - 12 taun
- Batré: 1 x batré 9V (kaasup)
- Pabrikan: KiwiCo
Garansi sareng Rojongan
For any questions, missing parts, or technical assistance, please contact KiwiCo customer support. While specific warranty details are not provided in this manual, KiwiCo is committed to customer satisfaction. Please refer to the official KiwiCo website or your purchase documentation for warranty information.
KiwiCo Support: Nganjang www.kiwico.com/help pikeun pitulung.
