Schiit Mani 2 Phono Preamp Manual pamaké

1. Bubuka

The Schiit Mani 2 is a high-performance phono preamplifier designed to connect a turntable to an audio system. It provides the necessary amplification and RIAA equalization for both Moving Magnet (MM), Moving Coil (MC), and Moving Iron (MI) cartridges, ensuring accurate playback of vinyl records. This manual provides instructions for setup, operation, and maintenance of your Mani 2.

2. Fitur

• Kinerja luhur: Designed for low noise and high RIAA accuracy, utilizing TI OPA1612 operational amplifiers and precision components.
• Cartridge Flexibility: Compatible with a wide range of MM, MC, and MI cartridges.
• Adjustable Gain: Selectable gain settings of 35dB, 45dB, 50dB, or 60dB to match various cartridge outputs.
• Adjustable Loading: Input loading options include 47KΩ, 200Ω, 47Ω, or 38Ω, and capacitance options of 47pF, 100pF, 150pF, or 200pF.
• Saringan Frékuénsi Lemah: Switchable 6dB/octave or 12dB/octave passive low-frequency filter at 15 Hz to address warped records or subsonic issues.
• DC Coupled Design: Features a DC-coupled topology with an advanced dual-filtered power supply for enhanced transparency.
• Sasayogian tanaga: Utilizes a +/-16V rail power supply for optimal performance.
• Pangwangunan: Designed and built in the USA.

3. Eusi Paket

Mangga cék kotak pikeun item di handap ieu:

• Schiit Mani 2 Phono PreampUnit pangropéa
• Power Adapter (115VAC, USA Plug)
• Manual pangguna (dokumén ieu)

If any items are missing or damaged, please contact your retailer or Schiit Audio support.

4. Émbaran Kasalametan

• Sasayogian tanaga: Use only the provided power adapter. This unit is designed for 115VAC operation with a USA plug and is suitable for use in the United States, Canada, and Mexico. It is not compatible with 220-240V electrical systems.
• Ventilasi: Pastikeun ventilasi nyukupan di sabudeureun unit. Ulah meungpeuk bukaan ventilasi.
• Uap: Ulah ngantepkeun unit ieu ka cai atanapi kalembaban anu kaleuleuwihi.
• Palayanan: There are no user-serviceable parts inside. Refer all servicing to qualified service personnel. Opening the unit voids the warranty.
• panempatan: Place the unit on a stable, level surface away from heat sources, direct sunlight, and strong electromagnetic fields.

5. Setélan

Follow these steps to set up your Schiit Mani 2 Phono Preamppanguat:

1. Ngabongkar: Carefully remove the Mani 2 and its power adapter from the packaging.
2. panempatan: Position the Mani 2 near your turntable and audio receiver/amplifier. Ensure there is enough space for cable connections and ventilation.
3. Adjust Dip Switches (Bottom Panel): Before connecting, configure the gain, loading, and low-frequency filter settings using the dip switches located on the bottom of the unit. Refer to Section 6.1 for detailed instructions on these adjustments.
4. Connect Turntable: Connect the RCA output cables from your turntable to the "IN" RCA jacks on the rear panel of the Mani 2. Ensure left (L) and right (R) channels are correctly matched.
5. Nyambungkeun Kawat Ground: Connect the ground wire from your turntable to the ground terminal on the rear panel of the Mani 2. This helps reduce hum and noise.
6. Nyambung ka Amppanguat: Connect the "OUT" RCA jacks on the rear panel of the Mani 2 to a line-level input (e.g., "AUX", "CD", "Tuner") on your audio receiver or amppangagung. Do not connect to your amplifier's "PHONO" input, as this would result in double pre-amplifikasi.
7. Sambungkeun Kakuatan: Connect the provided power adapter to the "AC IN" jack on the rear panel of the Mani 2, then plug the adapter into a suitable 115VAC wall outlet.
8. Daya Hurung: Flip the power switch on the rear panel to the "ON" position. The front panel LED will illuminate.

Figure 1: Rear panel connections of the Schiit Mani 2. Shows RCA input and output, ground terminal, and AC power input.

Figure 2: Bottom panel of the Schiit Mani 2, illustrating the dip switches for configuring gain, loading, and low-frequency filter settings.

6. Parentah Operasi

Once the Mani 2 is set up and connected, operating it is straightforward. The primary adjustments are made via the dip switches on the bottom panel.

6.1. Adjusting Gain, Loading, and LF Filter

The Mani 2 offers significant flexibility to match various cartridges. These settings are configured using dip switches on the bottom of the unit. Always power off the Mani 2 and disconnect the power adapter before making any adjustments to the dip switches.

Setélan gain

Gain adjusts the amplification level to match your cartridge's output. Refer to your cartridge's specifications for recommended gain. The Mani 2 offers four gain settings:

• 35dB: Suitable for high-output MM/MI cartridges.
• 45dB: Common for standard MM/MI cartridges.
• 50dB: For lower-output MM/MI or higher-output MC cartridges.
• 60dB: Ideal for low-output MC cartridges.

Consult Figure 2 for the location of the gain dip switches and their corresponding positions for each setting.

Loading Settings (Resistance and Capacitance)

Loading refers to the electrical impedance presented to the cartridge. Correct loading optimizes frequency response and transient behavior. The Mani 2 provides options for both resistive and capacitive loading.

• Resistive Loading: Choose from 47KΩ (standard for MM/MI), 200Ω, 47Ω, or 38Ω (for MC cartridges).
• Capacitive Loading: Choose from 47pF, 100pF, 150pF, or 200pF.

The default setting for MM/MI cartridges is typically 47KΩ and 47pF. For MC cartridges, consult the cartridge manufacturer's recommendations. Consult Figure 2 for the location of the loading dip switches and their corresponding positions for each setting.

Low-Frequency (LF) Filter

The LF filter helps mitigate issues caused by warped records or turntable rumble, which can cause excessive woofer excursion. The Mani 2 offers two passive filter options at 15 Hz:

• 6dB/octave: A gentler filter.
• 12dB/octave: A steeper filter for more pronounced issues.

If you experience excessive woofer movement or low-frequency distortion, engaging the LF filter may be beneficial. Consult Figure 2 for the location of the filter dip switches.

6.2. Operasi Normal

Once all connections and dip switch settings are confirmed:

1. Pastikeun Anjeun amplifier/receiver is turned off or its volume is set to minimum.
2. Turn on the Mani 2 using the rear power switch. The front LED will light up.
3. Hurungkeun anjeun amplifier/receiver and select the input connected to the Mani 2.
4. Start playing a record on your turntable.
5. Lalaunan ningkatkeun volume dina anjeun amplifier/receiver to your desired listening level.

Gambar 3: Hareupeun view of the Schiit Mani 2, highlighting its compact design and power indicator LED.

7. Pangropéa

• beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun bagian luar unit. Entong nganggo pembersih cair atanapi pelarut.
• Lebu: Keep the unit free from dust. Use compressed air to gently clear any dust from ventilation openings.
• Panyimpenan: Upami nyimpen unit kanggo waktos anu lami, pegatkeun sambungan listrik sareng simpen di tempat anu tiis sareng garing.

8. Cara ngungkulan

If you continue to experience issues, please contact Schiit Audio support for further assistance.

9. Spésifikasi

10. Garansi jeung Rojongan

Schiit Audio products are typically covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Schiit Audio websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Schiit Audio directly through their official websitus atanapi inpormasi kontak anu disayogikeun sareng produk anjeun.

Websitus: www.schiit.com