Manual Instruksi Bor/Pakakas Supir Tanpa Kabel Warrior 18V 3/8 Inci

1. Produk Langkungview

The Warrior 18V Cordless 3/8 Inch Drill/Driver Kit is designed for various drilling and driving tasks around the home and workshop. This versatile tool features a variable speed trigger, an electric brake, and 20 torque clutch settings for precise control. A keyless chuck allows for quick and easy bit changes, and a built-in LED light illuminates the work area for improved visibility in dark corners. The included 18V Lithium-Ion battery is interchangeable with other 18 Volt Warrior tools, offering convenience and flexibility.

Fitur konci:

• Variable speed, reversible operation
• Electric brake for immediate stopping
• 20 torque clutch settings for diverse applications
• Keyless chuck for quick bit changes
• Integrated LED light for enhanced visibility
• 18 Volt Lithium-Ion battery, interchangeable with other Warrior 18V tools

Figure 1: The Warrior 18V Cordless 3/8 Inch Drill/Driver Kit, showcasing desain anu ringkes sareng fitur-fitur konci na.

2. Setélan

2.1 Ngeusi batre jeung Pamasangan

1. Ngeusi batre: Connect the provided barrel charger to the charging port located on the battery pack. Plug the charger into a standard electrical outlet. The indicator light on the charger will show the charging status (e.g., red for charging, green for fully charged). Ensure the battery is fully charged before first use.
2. Masang Batré: Align the battery pack with the base of the drill handle. Slide the battery into place until it clicks securely. Ensure it is firmly seated to prevent accidental detachment during operation.
3. Nyoplokkeun Batréna: Press the battery release buttons (typically on the sides of the battery pack) and slide the battery out of the drill handle.

2.2 Nyelapkeun sareng Nyabut Mata Bor

1. Buka cuk: Rotate the front collar of the keyless chuck counter-clockwise until the jaws are wide enough to accept the desired drill bit or driver bit.
2. Selapkeun Bit: Insert the shank of the drill bit or driver bit into the chuck jaws. Ensure the bit is centered and inserted as far as possible without touching the chuck body.
3. Kencangkeun Chuck: Rotate the front collar of the chuck clockwise until the jaws firmly grip the bit. For maximum grip, give it an extra twist by hand.
4. Remove the Bit: Puterkeun kerah hareup chuck ka arah sabalikna jarum jam pikeun ngaleupaskeun rahangna sareng nyabut mata borna.

Gambar 2: Leuwihview of the drill's features, including the 20 clutch settings, LED light, variable speed, and lightweight design.

3. Parentah Operasi

3.1 Ngahurungkeun / Pareum sareng Kontrol Speed ​​Variabel

• To start the drill, press the trigger switch. The speed of the drill is controlled by the amount of pressure applied to the trigger; pressing it further increases the speed.
• To stop the drill, release the trigger switch. The electric brake will engage, stopping the chuck rotation quickly.

3.2 Maju / Ngabalikeun Rotasi

• Maju / ngabalikeun pamilih switch lokasina di luhur pemicu nu.
• Pencét saklar ka kénca pikeun muter ka hareup (pikeun ngebor sareng ngerem sekrup).
• Push the switch to the right for reverse rotation (for removing screws or backing out drill bits).
• Nalika saklar aya dina posisi tengah, pemicuna dikonci, nyegah ngamimitian sacara teu kahaja.

3.3 Torque Clutch Settings

• The torque clutch ring is located behind the chuck. It has 20 numbered settings and a drill symbol.
• Rotate the ring to select the desired torque setting. Lower numbers provide less torque, suitable for smaller screws and softer materials to prevent over-driving or stripping. Higher numbers provide more torque for larger screws and harder materials.
• For drilling applications, select the drill symbol setting for maximum torque.

3.4 LED Gawé Lampu

• The integrated LED work light automatically illuminates when the trigger is pressed, providing light to the work surface.

Figure 3: The Warrior 18V Cordless Drill in use, demonstrating its application for household tasks like installing a grab bar.

4. Pangropéa

4.1 beberesih umum

• Keep the tool's air vents clean and free of debris to ensure proper motor cooling.
• Lap alatna ku lawon bersih,amp lawon. Ulah make bahan kimia kasar atawa cleaners abrasive.
• Regularly inspect the chuck jaws for wear and clean any accumulated dust or debris.

4.2 Kamanusaan sarta Studi Batré

• Simpen batréna di tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Pikeun neundeun jangka panjang, disarankeun pikeun ngeusi batre dugi ka kapasitas 50%.
• Avoid completely draining the battery before recharging, as this can reduce its lifespan.

5. Cara ngungkulan

5.1 Drill Does Not Operate

• Pastikeun batréna geus dicas pinuh tur dipasang bener.
• Check that the forward/reverse selector switch is not in the center (locked) position.
• Verify that the charger is disconnected from the battery when attempting to operate the drill.

5.2 Reduced Power or Performance

• Batré bisa jadi low dina muatan. Ngecas batré.
• The torque clutch setting may be too low for the task. Adjust to a higher setting or the drill mode.
• Ensure the drill bit is sharp and appropriate for the material being worked on.

6. Spésifikasi

7. Garansi jeung Rojongan

Specific warranty information and customer support contact details were not provided in the product data. Please refer to the product packaging or the manufacturer's official websitus pikeun istilah jaminan paling up-to-date sareng pilihan dukungan.