SENIX 4QL 4-Cycle Gas Powered Tiller Cultivator (TL4QL-L1) Instruction Manual

1. Bubuka

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your SENIX 4QL 4-Cycle Gas Powered Tiller Cultivator. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.

The SENIX 4QL Tiller Cultivator is designed for preparing soil for planting, weeding, and general garden maintenance. It features a 46cc 4-cycle engine, offering a 15-inch tilling width and an 8-inch tilling depth.

2. Émbaran Kasalametan

PERHATOSAN: Operating gasoline engine equipment can expose you to chemicals including engine exhaust, carbon monoxide, and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, gloves, and sturdy footwear, when operating the tiller.
• Keep hands, feet, and clothing away from rotating tines.
• Mastikeun wewengkon gawé jelas tina bystanders, barudak, jeung piaraan.
• Never operate the tiller in an enclosed space due to the risk of carbon monoxide poisoning.
• Before performing any maintenance or clearing obstructions, always turn off the engine and ensure all moving parts have stopped.
• Handle fuel with extreme care. Store gasoline in an approved container in a well-ventilated area, away from ignition sources.

3. Majelis

The SENIX 4QL Tiller Cultivator requires minimal assembly. Typically, this involves attaching the handles and ensuring all components are securely fastened. Refer to the included assembly diagram for detailed steps.

• Majelis nanganan: Attach the foldable handles to the main unit using the provided hardware. Ensure they are locked into the operating position before use.
• Penyesuaian roda: The wheels can be adjusted. Drop the wheels when not in use for storage or transport, and raise them when tilling.

Figure 3.1: Adjustable wheels for transport and tilling.

4. Setélan

4.1 Suluh

The SENIX 4QL Tiller Cultivator is equipped with a 4-cycle engine. This means there is no need to mix gas and oil. Use fresh, unleaded gasoline with an octane rating of 87 or higher. The fuel tank capacity is 0.8 liters.

• Pastikeun mesin pareum sareng tiis sateuacan ngeusian bengsin.
• Refuel in a well-ventilated outdoor area.
• Do not overfill the fuel tank. Leave space for fuel expansion.

4.2 Oli Mesin

The tiller includes engine oil. Before first use, ensure the engine oil level is correct. The oil tank capacity is 0.1 liters. Refer to the engine manual for specific oil type and checking procedures.

Figure 4.1: Engine view with fuel and oil components.

5. Parentah Operasi

5.1 Mimitian Mesin

The SENIX 4QL Tiller features an auto choke and compression release for easy starting.

1. Ensure the fuel tank is filled and oil level is correct.
2. Move the choke lever to the 'START' position (if applicable, some models have auto-choke).
3. Pencét bohlam primer sababaraha kali dugi suluh katingali.
4. Tarik tali starter pageuh tur lancar nepi ka mesin hurung.
5. Sakali mesin dimimitian, laun pindahkeun uas cuk ka posisi 'RUN'.

5.2 Ngolah

The tiller is equipped with 6 premium steel forward rotating tines, offering a 15-inch tilling width and 8-inch tilling depth.

• Ensure the adjustable wheels are in the raised position for tilling.
• Tahan gagangna pageuh ku dua leungeun.
• Engage the throttle to begin tilling.
• Pituduh patani lalaunan jeung ajeg ngaliwatan taneuh. Ulah maksakeun mesin.
• The tiller is suitable for various terrains including dry ground, hard soil, muddy ground, and weedy ground.

Figure 5.1: Tilling width and depth capabilities.

Figure 5.2: Tiller suitability for various soil types.

5.3 Ngeureunkeun Mesin

To stop the engine, release the throttle and move the engine switch to the 'OFF' position.

6. Pangropéa

Regular maintenance ensures the longevity and optimal performance of your tiller.

• Kabersihan: After each use, clean the tiller, especially the tines, to remove soil, debris, and plant matter.
• Inspeksi Tine: Periodically check the tines for wear, damage, or obstructions. Remove any wrapped material like wire or roots.
• Sabeulah anu tiasa dicabut: The tiller features a removable blade for convenient cleaning and maintenance. Refer to the manual for instructions on safe removal and reinstallation.
• Parobahan oli: Follow the manufacturer's recommendations for regular engine oil changes.
• Filter hawa: Inspect and clean or replace the air filter as needed to ensure proper engine performance.

Figure 6.1: Removable blade for convenient cleaning.

7. Cara ngungkulan

If you encounter issues with your tiller, consult the following common troubleshooting tips:

If problems persist after attempting these solutions, please contact SENIX customer service.

8. Spésifikasi

9. Garansi jeung Rojongan

The SENIX 4QL Gas Powered Tiller Cultivator is backed by a 3-taun jaminan kawates. For warranty claims, technical assistance, or to order replacement parts, please contact SENIX customer service.

For further information and support, you may visit the official SENIX websitus atanapi tingal wincik kontak disadiakeun dina bungkusan produk Anjeun.

10. Produk Langkungview Video