1. Bubuka
The IEI CF-1150SE-R11 is a high-performance CPU cooler designed specifically for LGA1150 socket processors. It provides efficient heat dissipation to maintain optimal operating temperatures for your CPU, ensuring stable system performance. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting.
1.1 Eusi pakét
- 1x IEI CF-1150SE-R11 CPU Cooler (Heatsink with pre-attached fan)
- 1x Mounting Hardware Kit (LGA1150 compatible)
- 1x Thermal Paste (pre-applied or in a small tube)
- 1x Manual Pamaké (dokumén ieu)
2. Émbaran Kasalametan
Please read and understand all safety precautions before installing or operating this product. Failure to do so may result in personal injury or damage to your equipment.
- Salawasna pegatkeun daya tina komputer anjeun sateuacan dipasang atanapi diropéa.
- Handle the CPU and cooler with care to avoid damaging pins or components.
- Anggo tali pigeulang anti statik pikeun nyegah karusakan éléktrostatik (ESD) kana komponén éléktronik anu sénsitip.
- Jauhkeun tina jangkauan barudak.
- Ulah nyobian ngarobih pendingin atanapi komponénna.
- Ensure proper ventilation around your computer system.
3. Setup jeung Instalasi
Follow these steps carefully to install the IEI CF-1150SE-R11 CPU cooler onto your LGA1150 motherboard.
- Nyiapkeun motherboard: Ensure your motherboard is removed from the PC case or has sufficient access to the CPU socket area. If an old cooler was present, carefully remove it and clean any residual thermal paste from the CPU and motherboard.
- Larapkeun Témpél Thermal: If thermal paste is not pre-applied to the cooler's base, apply a small, pea-sized amount to the center of the CPU's integrated heat spreader (IHS). Do not spread it manually; the pressure from the cooler will distribute it.
- Posisi Cooler: Carefully align the cooler's mounting holes with the holes around the LGA1150 CPU socket on the motherboard.
- Amankeun Cooler: Gently lower the cooler onto the CPU. Use the provided mounting hardware (e.g., push-pins or screws) to secure the cooler evenly. Tighten screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) to ensure even pressure distribution. Do not overtighten.
- Sambungkeun Kabel Kipas: Locate the CPU_FAN header on your motherboard. Connect the 4-pin fan cable from the IEI CF-1150SE-R11 cooler to this header. Ensure the connector is fully seated.
- Pariksa Pamasangan: Double-check that the cooler is securely mounted and the fan cable is properly connected.
4. Parentah Operasi
Once properly installed and connected, the IEI CF-1150SE-R11 CPU cooler operates automatically. The fan speed is typically controlled by the motherboard's BIOS/UEFI settings or operating system software, based on the CPU temperature. Ensure your system's BIOS/UEFI is configured to manage CPU fan speeds for optimal cooling and noise levels.
5. Pangropéa
Pangropéa rutin ngabantosan mastikeun umur panjang sareng kinerja optimal tina pendingin CPU anjeun.
- Ngaleungitkeun lebu: Periodically (e.g., every 3-6 months), power off your computer and disconnect it from the power source. Use compressed air to gently blow dust out of the heatsink fins and fan blades. Hold the fan blades gently to prevent them from spinning rapidly during cleaning, which can damage the fan bearing.
- Témpél termal: The thermal paste typically lasts for several years. If you notice significantly higher CPU temperatures, consider reapplying fresh thermal paste after carefully cleaning the old paste from the CPU and cooler base. This usually requires removing the cooler.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| CPU Overheating | Improper cooler installation; insufficient thermal paste; fan not spinning; poor case airflow. | Re-seat the cooler, ensuring even pressure. Reapply thermal paste. Check fan connection to CPU_FAN header. Improve case ventilation. |
| Kipas Teu Spinning | Fan cable disconnected; faulty fan header; fan failure. | Ensure fan cable is securely connected to CPU_FAN. Try connecting to another fan header (if available). Contact support if fan is faulty. |
| Kaleuleuwihan Fan Noise | Dust accumulation; fan bearing issue; fan running at maximum RPM. | Clean dust from fan and heatsink. Check BIOS/UEFI settings for fan speed control (e.g., set to "Silent" or "Standard" mode). |
7. Spésifikasi
| Fitur | Rincian |
|---|---|
| Modél | CF-1150SE-R11 |
| Sockets CPU cocog | LGA1150 |
| Ukuran (L x W x H) | 107mm x 61mm x 60mm (kira-kira) |
| Daya Desain Termal (TDP) | Nepi ka 95W |
| Laju rotasi maksimum | 3500 rpm |
| Panyambung kakuatan | PWM 4-pin PWM |
| Bahan | Copper (Heatsink), Plastic (Fan) |
| minuhan | RoHS patuh |
| Item Beurat | 9.99 Pon (kira-kira 4.53 kg) |
| UPC | 705514633149 |
8. Garansi jeung Rojongan
This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official IEI website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact IEI customer service through their official channels.
Pabrikan: IEI Technology
Websitus: www.ieiworld.com (Catetan: Ieu placeholder a URL for IEI's official website. Please verify the correct URL.)
