1. Bubuka
This manual provides comprehensive instructions for the safe and effective use of your Dasqua 1804-1055 2-in-1 Laser Tape Measure. This device combines a traditional 5-meter tape measure with a 30-meter laser distance meter, featuring an OLED display for clear readings and USB charging capability. Please read this manual thoroughly before operating the device and retain it for future reference.
2. Émbaran Kasalametan
PERHATOSAN: This product contains a Class 2 laser. Improper use can result in hazardous radiation exposure. Always adhere to the following safety guidelines:
- Ulah neuteup langsung kana sinar laser.
- Ulah ngarahkeun sinar laser ka jalma atawa sato.
- Avoid pointing the laser beam at reflective surfaces, as reflected beams can also be hazardous.
- Do not disassemble or modify the device. Unauthorized modifications can lead to laser radiation exposure.
- Jauhkeun alat tina jangkauan barudak.
- Anggo ngan sakumaha anu dijelaskeun dina manual ieu.
- Ulah ngajalankeun alat dina atmosfir ngabeledug atawa deukeut cair atawa gas kaduruk.
3. Produk Langkungview
3.1 Komponén jeung kadali
Familiarize yourself with the main components and control buttons of your Dasqua 2-in-1 Laser Tape Measure.
Image: Diagram showing the Dasqua 1804-1055 device with labels for the OLED display, laser emission point, USB charging port, tape measure, lock button, and control buttons.
- Tampilan OLED: Shows measurements, battery status, and operating modes.
- Pita ukur: Traditional retractable steel tape for short-distance measurements (5m).
- Laser Emission Point: Where the laser beam exits the device.
- Palabuhan Ngecas USB: Pikeun ngecas batré internal.
- Tombol konci: Secures the tape measure in position.
3.2 Tombol Kontrol
Gambar: Deukeut view of the control panel on the Dasqua 1804-1055, showing the FUNC/UNITS, +/-, DIST, and CLEAR/OFF buttons.
- FUNC/UNITS: Press to cycle through measurement functions (e.g., single, continuous) or to change measurement units (meters, feet, inches).
- +/-: Used for adding or subtracting measurements. Also used to set the measurement reference point (front or rear of the device).
- DIST: Activates the laser for measurement. Press once to turn on the laser, press again to take a measurement.
- CLEAR/OFF: Press once to clear the current measurement. Press and hold to power off the device.
4. Setélan
4.1 Ngecas Alat
The Dasqua 1804-1055 is equipped with a built-in Li-ion 3.7V rechargeable battery. Before first use, ensure the device is fully charged.
Gambar: Sisi view of the Dasqua 1804-1055 showing the micro-USB charging port.
- Panggihan port ngecas USB di sisi alat.
- Connect the provided USB cable to the device and to a standard USB power adapter (not included) or a computer USB port.
- Layar OLED bakal nunjukkeun status ngecas.
- Saatos dicas pinuh, pegatkeun sambungan kabel USB.
Ngecas pinuh ngahasilkeun kira-kira 2000 pangukuran.
4.2 Powering on / Pareum
- Pikeun Ngahurungkeun: Pencét éta DIST tombol atawa nu HARUS/PAreuman kancing.
- Pikeun mareuman: Pencét jeung tahan tombol HARUS/PAreuman button for a few seconds. The device will also automatically power off after 90 seconds of inactivity to conserve battery. The laser itself turns off after 30 seconds of inactivity.
5. Parentah Operasi
5.1 Ngagunakeun Pita Ukur
The integrated 5-meter tape measure functions like a standard tape measure.
Gambar: Deukeut view of the 2.5cm wide tape measure extending from the Dasqua 1804-1055 device, showing metric markings.
- Pull the tape blade out to the desired length.
- To lock the tape in place, slide the lock button forward.
- To retract the tape, slide the lock button backward and gently guide the tape back into the housing.
5.2 Using the Laser Measure
The laser measure provides quick and accurate digital distance measurements up to 30 meters.
Image: The Dasqua 1804-1055 device with a visible red laser beam extending from its front, indicating active laser measurement.
Ukur Jarak Tunggal
- Daya dina alat.
- Point the laser emission point towards the target.
- Pencét éta DIST button once to activate the laser. A red laser dot will appear on the target.
- Pencét éta DIST button again to take the measurement. The distance will be displayed on the OLED screen.
Pangukuran Kontinyu (Nyukcruk)
- Daya dina alat.
- Pencét éta FUNC/UNITS button until the continuous measurement icon (often a moving line or similar) appears on the display.
- Pencét éta DIST button once to start continuous measurement. The display will update in real-time as you move the device.
- Pencét éta DIST button again to stop continuous measurement and hold the last reading.
Ngarobah Unit Ukur
To switch between meters (m), feet (ft), and inches (in):
- Pencét éta FUNC/UNITS pencét tombol sababaraha kali dugi ka unit anu dipikahoyong némbongan.
Setélan Titik Rujukan Pangukuran
The device can measure from its front edge or its rear edge. This is typically indicated by an icon on the display.
- Pencét éta +/- button to toggle between front-edge and rear-edge measurement reference.
Addition and Subtraction of Measurements
The device supports basic arithmetic operations for measurements.
- Take the first measurement using the DIST kancing.
- Pencét éta +/- button once for addition (+) or twice for subtraction (-). The corresponding symbol will appear on the display.
- Take the second measurement. The result of the operation will be displayed.
- To clear the calculation, press HARUS/PAreuman.
6. Pangropéa
- beberesih: Ngagunakeun lemes, damp lawon pikeun ngabersihkeun alat. Entong nganggo pembersih anu abrasif, pangleyur, atanapi ngalelepkeun alat kana cai.
- Panyimpenan: Simpen alat dina tempat anu tiis, garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
- Batré: Recharge the battery regularly, even if the device is not in frequent use, to maintain battery health.
- Lénsa Laser: Keep the laser emission and reception lenses clean for accurate measurements. Use a soft cloth, similar to cleaning camera lenses.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat teu hurung. | batré lemah. | Ngecas alat nganggo kabel USB. |
| Pangukuran laser anu teu akurat. | Dirty laser lens; unstable measurement surface; incorrect reference point. | Clean the laser lens; ensure a stable measurement; verify reference point setting. |
| Laser teu aktip. | Device in incorrect mode; low battery. | Ensure device is powered on and not in a non-laser mode; charge battery. |
| OLED display is dim or blank. | Low battery; device powered off. | Charge the device; power on the device. |
8. Spésifikasi
Detailed technical specifications for the Dasqua 1804-1055 2-in-1 Laser Tape Measure.
Image: Detailed diagram of the Dasqua 1804-1055 with a list of technical specifications including measurement range, accuracy, laser class, operating conditions, and battery life.
| Fitur | Spésifikasi |
|---|---|
| Laser Rentang Ukur | 0.05 - 30 méter |
| Panjang Pita Ukur | 5 méter |
| Akurasi Ukur | +/- 3 mm |
| Kelas laser | Kelas 2 |
| Jenis laser | 620-690nm, <1mW |
| Suhu Operasi | 0°C - 40°C (32°F - 104°F) |
| Suhu Panyimpenan | -20°C - 70°C (-4°F - 158°F) |
| Tipe tampilan | OLED, Multi-line (2 lines), White on Black |
| Jenis Batré | Li-ion 3.7V |
| Kahirupan batré | Kira-kira. 2000 pangukuran |
| Laser Auto-Off | 30 detik |
| Daya Otomatis-Pareum | 90 detik |
| Pita Lebar | 2.5 cm |
| Ngecas | kamampuan ngecas USB |
| Dimensi produk | 6 x 5 x 3 inci (kira-kira) |
| Item Beurat | 2 pon (kira-kira) |
9. Garansi jeung Rojongan
Dasqua products are manufactured under strict quality control. This product is inspected and approved for sale by Dasqua quality control centers.
Image: The Dasqua 1804-1055 device alongside a "Warranty Letter" and an instruction manual, indicating product quality assurance.
Dasqua takes responsibility for the quality of the product, providing a 1-year warranty against defects. Parts found to be defective may be repaired or replaced at Dasqua's sole discretion. This warranty does not apply to any product which has been subject to misuse, abuse, improper application, or which has been altered or repaired by unauthorized personnel.
For warranty claims or technical support, please contact your authorized Dasqua dealer or visit the official Dasqua websitus pikeun inpo kontak.
