Buku Panduan Pangguna Casing Gaming Mid Tower ATX AZZA CSAZ-280B Spectra Hideung

1. Produk Langkungview

The AZZA CSAZ-280B Spectra Black is an ATX Mid Tower gaming case designed to house various computer components. It features a tempered glass side panel and a steel right panel. This manual provides instructions for the proper installation and maintenance of your computer components within this case.

Gambar 1.1: Hareup-kénca view of the AZZA CSAZ-280B Spectra Black case, showcasing the tempered glass side panel and the front panel design with integrated RGB lighting.

Fitur konci:

• Left Panel: Tempered glass with rubber mounts for secure installation.
• Right Panel: Solid steel panel.
• Motherboard Compatibility: Supports ATX, Micro-ATX, and ITX motherboards.
• Drive Bays: Up to three 2.5" drive bays and up to two 3.5" drive bays.
• Maximum CPU Cooler Height: Up to 170 mm.
• Maximum Video Card Length: Up to 290 mm.

2. Setup jeung Instalasi komponén

Follow these steps for proper installation of your computer components into the AZZA CSAZ-280B case. Ensure the system is powered off and unplugged before beginning any installation.

2.1 Sambungan Panel I/O Hareup

The top panel of the case features various input/output ports and controls for convenient access.

Gambar 2.1: Luhur-handap view of the case's front I/O panel, indicating the Power button, LED control button, Audio jacks (Mic and Headphone), two USB 2.0 ports, and one USB 3.0 port.

• Tombol Daya: Pencét pikeun ngahurungkeun atanapi mareuman sistem.
• Tombol LED: Controls the RGB lighting effects of the case.
• Jacks audio: Separate ports for microphone and headphones.
• Port USB 2.0: Two ports for connecting USB 2.0 devices.
• Palabuhan USB 3.0: One port for connecting USB 3.0 devices, offering faster data transfer speeds.

2.2 Pamasangan drive

The case supports both 3.5" HDDs and 2.5" SSDs. Refer to the images below for drive bay locations.

Gambar 2.2: Internal view showing the lower drive cage, capable of holding one 3.5" HDD or one 2.5" SSD, and an additional dedicated 3.5" HDD bay.

Gambar 2.3: Internal view showing two dedicated 2.5" SSD mounting brackets located behind the motherboard tray.

1. For 3.5" HDDs: Install drives into the designated 3.5" drive cage located at the bottom front of the case. Secure with screws.
2. For 2.5" SSDs: Install drives into the dedicated 2.5" mounting brackets behind the motherboard tray or in the lower drive cage. Secure with screws.

2.3 Pamasangan Kartu Grafika

Kasus ngadukung kartu grafik dugi ka 290mm panjangna.

Gambar 2.4: Internal view illustrating the maximum supported length for a video card, which is 290mm.

1. Leupaskeun perlu PCI-E slot nyertakeun ti pungkur kasus.
2. Carefully insert the graphics card into the PCI-E slot on your motherboard.
3. Ngamankeun kartu grafik kana kasus kalawan screws.

2.4 Pamasangan Kipas sareng Aliran Udara

Proper fan placement ensures optimal cooling performance. The case supports various fan configurations:

• Hareup: Supports 3 x 120mm fans or 2 x 140mm fans.
• luhur: Ngarojong 2 kipas x 120mm.
• Tukangeun: Ngarojong 1 x kipas 120mm.

Gambar 2.5: Internal view of the front panel, highlighting the mounting locations for up to three 120mm fans or two 140mm fans.

Gambar 2.6: Internal view of the top panel, showing the mounting locations for up to two 120mm fans.

Gambar 2.7: Internal view of the rear panel, indicating the mounting location for one 120mm fan.

1. Identify the desired fan mounting locations (front, top, rear).
2. Secure fans to the case using appropriate fan screws.
3. Connect fan power cables to the motherboard or a fan controller.

2.5 Pamasangan catu daya

The power supply unit (PSU) mounts at the bottom of the case.

1. Slide the PSU into the designated compartment at the bottom rear of the case.
2. Pasangkeun PSU kana wadahna nganggo sekrup ti tukang.
3. Route power cables through the cable management cutouts to reach your components.

3. Parentah Operasi

3.1 Daya Hurung/Pareuman

To power on your system, press the power button located on the top I/O panel. To power off, either shut down through your operating system or press and hold the power button for several seconds.

3.2 Kontrol LED

Use the dedicated LED button on the top I/O panel to cycle through various lighting modes and colors for the integrated RGB elements of the case.

4. Pangropéa

Pangropéa rutin ngabantosan mastikeun kinerja optimal sareng umur panjang komponén PC anjeun.

• beberesih lebu: Bersihkeun saringan lebu sareng komponén internal sacara berkala nganggo hawa anu dikomprés. Pastikeun sistem dipareuman sareng dicabut tina colokan sateuacan dibersihkeun.
• Manajemén Kabel: Ensure cables are neatly routed to prevent obstruction of airflow and to maintain a clean interior.
• Perawatan Panel: Clean the tempered glass panel with a soft, lint-free cloth and a mild glass cleaner. Avoid abrasive materials.

5. Cara ngungkulan

Bagian ieu ngabahas masalah umum anu anjeun tingali.

• Sistem Henteu Diaktipkeun:
  • Verify all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
  • Pastikeun saklar catu daya aya dina posisi 'ON'.
  • Check that the front panel power button cable is correctly connected to the motherboard's front panel header.
• Kipas Teu Muter / LED Teu Nyala:
  • Confirm fan power cables are properly connected to the motherboard or fan controller.
  • Ensure LED cables are correctly connected to the motherboard's RGB header or the case's LED controller.
  • Press the LED button on the top I/O panel to cycle through modes or turn on the lighting.
• Port USB Teu Berfungsi:
  • Check that the USB 2.0 and USB 3.0 headers from the front panel are correctly plugged into the corresponding ports on your motherboard.
• Jack Audio Teu Jalan:
  • Ensure the HD Audio cable from the front panel is securely connected to the HD Audio header on your motherboard.

6. Spésifikasi

Detailed technical specifications for the AZZA CSAZ-280B Spectra Black case.

7. Garansi jeung Rojongan

7.1 Sarat jeung Kaayaan Balik deui

This product is subject to a 30-day return policy for refund or replacement, as per the retailer's terms.

7.2 Rojongan Téknis

For technical assistance or inquiries regarding your AZZA product, please visit the official AZZA website or contact their customer support channels. You can find more information and contact details by visiting the AZZA Store on Amazon.