Crystorama Libby Langdon Sylvan 4 Light Black Forged Lantern Chandelier Instruction Manual

1. Bubuka

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Crystorama Libby Langdon Sylvan 4 Light Black Forged Lantern Chandelier. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation by a qualified electrician is recommended.

Gambar 1.1: Hareupeun view of the Crystorama Libby Langdon Sylvan 4 Light Black Forged Lantern Chandelier with shades.

2. Émbaran Kasalametan penting

Pikeun ngurangan résiko seuneu, shock listrik, atawa tatu pribadi, salawasna turutan pancegahan dasar ieu:

• Pegatkeun Daya: Always turn off the electrical supply at the main fuse or circuit breaker box before beginning installation or performing any maintenance.
• Tukang listrik anu mumpuni: Installation should be performed by a qualified, licensed electrician.
• Grounding: Ensure the fixture is properly grounded to avoid potential electrical shock.
• Wiring: Sadaya sambungan kabel kedah dilakukeun saluyu sareng kode listrik lokal sareng nasional.
• Bohlam Wattage: Ulah ngaleuwihan wat maksimumtage specified for the bulbs. This fixture is designed for E12 base bulbs, up to 60 watts each.
• Penanganan: Handle the fixture and glass components with care to prevent breakage or injury.
• Didaptarkeun UL: This product is UL listed, ensuring it meets specific safety standards.

3. Spésifikasi produk

Image 3.1: Dimensional drawing of the chandelier, showing 21.5" width, 29.75" height, and 72" chain length.

4. Eusi Paket

Carefully unpack your new chandelier and lay out all parts on a clean, soft surface. Ensure all components are present before discarding packaging materials.

• Chandelier Frame (Black Forged)
• 4 Glass Shades (White Enclosed)
• Mounting Hardware Kit (Canopy, Mounting Plate, Screws, Wire Nuts)
• Chain and Wiring (Pre-attached or separate for assembly)
• Instruksi Manual

Catetan: Bulbs are not included with this fixture. Four (4) E12 base bulbs, up to 60 watts each, are required.

Gambar 4.1: Deukeut view of the four E12 bulb sockets and white enclosed glass shades.

5. Setup jeung Instalasi

This chandelier is designed for semi-flush mount installation. Professional installation by a licensed electrician is strongly recommended.

Alat jeung Bahan Diperlukeun (Teu Kaasup):

• Phillips Kepala Obeng
• Obeng Flathead
• Kawat Strippers
• Tang
• Pita listrik
• Kacamata Kasalametan
• Tangga
• E12 Base Bulbs (4, max 60W each)

Léngkah-léngkah pamasangan:

1. Pareuman Daya: Locate the circuit breaker that supplies power to the installation location and turn it off. Verify power is off using a voltage panguji.
2. Nyiapkeun pamasangan: Pasangkeun pelat pemasangan kana kotak sambungan di lalangit nganggo sekrup anu disayogikeun. Pastikeun éta dipasang pageuh.
3. Adjust Chain Length (if applicable): If your fixture includes a chain, determine the desired hanging height and adjust the chain length by removing links as needed. Feed the electrical wires through the chain and canopy.
4. Jieun sambungan listrik: Connect the fixture's wires to the house wiring.
   • Connect the bare copper (ground) wire from the fixture to the green or bare copper ground wire from the junction box.
   • Sambungkeun kabel hideung (panas) tina fixture ka kabel hideung (panas) tina kotak sambungan.
   • Sambungkeun kabel bodas (nétral) tina fixture ka kabel bodas (nétral) tina kotak sambungan.
   Amankeun sadaya sambungan nganggo mur kawat teras bungkus ku pita listrik pikeun kaamanan tambahan.
5. Kanopi Aman: Carefully push the canopy up to the ceiling, covering the junction box, and secure it with the provided screws or nuts.
6. Pasang Bulbs: Screw four (4) E12 base bulbs (not included) into the sockets. Do not exceed 60 watts per bulb.
7. Gantelkeun nuansa: Carefully place the white enclosed glass shades over each bulb socket.
8. Mulangkeun Daya: Hurungkeun deui kakuatan dina circuit breaker.

Gambar 5.1: Angled view of the chandelier, showcasing its black forged frame and white shades.

6. Parentah Operasi

Once installed, your Crystorama Libby Langdon Sylvan Chandelier operates via a standard wall switch connected to the fixture's electrical circuit. Simply toggle the wall switch to turn the chandelier on or off.

This fixture is compatible with dimmable E12 LED bulbs if connected to a compatible dimmer switch (sold separately).

7. Perawatan sareng Pangropéa

Regular cleaning and proper care will help maintain the appearance and functionality of your chandelier.

beberesih:

• Sok Pegatkeun Daya: Before cleaning, ensure the power supply to the fixture is turned off at the circuit breaker.
• Pigura: Wipe the black forged metal frame with a soft, dry, or slightly damp cloth. Avoid abrasive cleaners, solvents, or polishes, as these can damage the finish.
• Kaca nuansa: The white enclosed glass shades can be gently wiped with a soft, damp cloth. For stubborn marks, a mild glass cleaner can be used sparingly on the cloth, not directly on the glass. Ensure shades are completely dry before restoring power.

Ngagantian bohlam:

• Pareuman Daya: Always turn off the power at the circuit breaker before replacing bulbs.
• Ngidinan Cooling: Keun bohlamna tiis sagemblengna sateuacan dirampa.
• Ganti: Unscrew the old bulb and screw in a new E12 base bulb. Ensure the replacement bulb does not exceed 60 watts.

8. Cara ngungkulan

If you experience issues with your chandelier, consult the following common problems and solutions:

If the issue persists after attempting these solutions, please contact Crystorama customer support or a qualified electrician.

9. Garansi jeung Rojongan

This Crystorama Libby Langdon Sylvan Chandelier is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your purchase or visit the official Crystorama websitus.

For additional assistance, you may contact Crystorama customer service directly.