ELEGANT Corner Shower Enclosure Instruction Manual

1. Bubuka

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your ELEGANT Corner Shower Enclosure. Please read all instructions carefully before beginning installation to ensure proper assembly and safe use. Retain this manual for future reference.

Image 1.1: ELEGANT Corner Shower Enclosure (34x34x72, Black Framed) installed in a bathroom setting.

2. Émbaran Kasalametan

PERHATOSAN: Installation of this product requires two or more people due to the weight and size of the glass panels. Failure to follow these safety instructions may result in personal injury or product damage.

• Salawasna ngagem kacamata kaamanan salila instalasi.
• Ati-ati pisan dina ngurus panel kaca. Kaca tempered, sanaos kuat, tiasa pecah upami digebugan sisi atanapi juruna.
• Pastikeun permukaan pamasangan (témbok, lanté) sacara struktural kuat sareng rata.
• Use appropriate tools and hardware for installation.
• Pamasangan profésional disarankeun pikeun kaamanan sareng kinerja anu optimal.
• Do not use abrasive cleaners or tools that could scratch the glass or frame finish.

3. Eusi Paket

Pariksa heula sadaya komponén aya sareng henteu ruksak sateuacan ngamimitian pamasangan. Upami aya bagian anu leungit atanapi ruksak, hubungi dukungan palanggan ELEGANT.

• Tempered Glass Panels (2 fixed, 2 sliding doors)
• Aluminum Wall Profiles
• Top and Bottom Guide Rails
• Sliding Door Rollers (Top and Bottom)
• Panto cecekelan
• Strip Segel Tahan Cai
• Mounting Hardware (Screws, anchors, gaskets)

Image 3.1: Illustration showing glass and frame components pre-installed in packaging for easier assembly.

4. Spésifikasi

5. Setup jeung Instalasi

Before starting, ensure you have all necessary tools (e.g., drill, level, measuring tape, screwdriver, caulk gun, silicone sealant) and that your shower base or curb is properly installed and level.

5.1. Cék Pra-Pamasangan

• Unpack all components and inspect for damage.
• Confirm wall studs or blocking are present in the installation area for secure mounting.
• Measure the shower opening to ensure it matches the enclosure dimensions.

5.2. Tembok Profile Pamasangan

1. Position the aluminum wall profiles against the finished walls at the desired height. Use a level to ensure they are perfectly vertical.
2. Mark the drilling points through the pre-drilled holes in the profiles.
3. Bor liang teras pasang jangkar témbok (upami diperyogikeun).
4. Ngamankeun témbok profiles to the walls using the provided screws. The design allows for up to 20mm (approximately 0.78 inches) of adjustment on each side for out-of-plumb walls.

Image 5.2.1: Detail showing the 20mm adjustment capability of the wall profiles for accommodating uneven walls.

5.3. Fixed Glass Panel Installation

1. Carefully insert the fixed glass panels into the installed wall profiles and the bottom guide rail.
2. Ensure the glass is seated firmly and evenly.
3. Secure the fixed panels using the appropriate fasteners as indicated in the detailed diagram.

5.4. Ngageser Door Majelis

1. Attach the rollers to the top and bottom of the sliding glass doors. Ensure rollers are securely fastened and move freely.
2. Install the door handles onto the sliding glass panels.

Image 5.4.1: Step 1 of roller installation, showing attachment to the glass panel.

Image 5.4.2: Step 2 of roller installation, showing the roller secured to the glass.

5.5. Sliding Door Installation

1. Carefully lift and place the assembled sliding doors onto the top and bottom guide rails. Ensure the rollers engage smoothly with the tracks.
2. Test the sliding motion of both doors to ensure they operate freely and meet correctly in the corner.

Image 5.5.1: Detail of the bottom guide rail, illustrating how the sliding door rollers engage with the track.

5.6. Waterproof Seal Installation

1. Install the provided waterproof seal strips along the edges of the glass panels and where the doors meet. These seals are designed to prevent water leakage.
2. Apply a continuous bead of silicone sealant along the exterior base of the enclosure where it meets the shower base or curb, and along the exterior vertical joints where the wall profiles meet the walls.
3. Allow the sealant to cure completely (typically 24-48 hours) before using the shower.

Gambar 5.6.1: Deukeut view of the black waterproof seal strips designed to prevent water leakage.

6. Parentah Operasi

The ELEGANT Corner Shower Enclosure features double sliding doors for convenient access. To open, gently slide either door along its track. To close, slide the doors until they meet in the corner, where they will be held in place by magnetic seals.

• Avoid forcing the doors if they encounter resistance. Inspect the tracks for obstructions.
• Do not hang heavy objects from the door handles or frame.

7. Pangropéa

Regular cleaning and maintenance will ensure the longevity and appearance of your shower enclosure.

• Ngabersihan Kaca: Clean glass panels regularly with a soft cloth and a non-abrasive glass cleaner. Avoid cleaners containing harsh chemicals, abrasives, or scouring pads, as these can damage the glass or protective coatings.
• Ngabersihkeun pigura: Wipe down aluminum profiles kalawan lemes, damp lawon. Pikeun noda anu bandel, anggo pembersih anu hampang sareng henteu abrasif.
• Inspeksi segel: Periodically check the waterproof seal strips for wear or damage. Replace if necessary to prevent leaks.
• Pangropéa Roller sareng Trek: Keep the top and bottom tracks free of soap scum, hair, and debris to ensure smooth door operation. Clean rollers with a small brush if needed.

8. Cara ngungkulan

9. Garansi sarta Rojongan Palanggan

ELEGANT products are manufactured to high-quality standards. For warranty information or assistance with parts, installation, or troubleshooting, please contact ELEGANT customer support. Our service representatives are available to assist you with any questions.

Please have your model number (BL-343472GD) and purchase date available when contacting support.