BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Bubuka

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Fitur produk

• Sénsor gerak terpadu: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Tilu Modeu Operasi:
  • Mode otomatis: Light activates when motion is detected in dark conditions.
  • Mode ON: Light remains constantly on.
  • Mode G: Light activates when motion is detected in both daytime and nighttime conditions.
• Suhu tilu warna: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Desain ultra-ipis: Low-profile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Pamasangan serbaguna: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Eusi pakét

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1 x Manual Instruksi (Dokumén ieu)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Émbaran Kasalametan

PERHATOSAN: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• Alat ieu dirancang pikeun catu daya AC 120V.
• Ulah nyobian ngarobih fixture na.
• Tetep barudak jauh ti wewengkon instalasi.

Setup & Pamasangan

Turutan léngkah ieu pikeun instalasi anu leres:

1. Nyiapkeun pikeun Instalasi:
   • Pareuman kakuatan dina pemutus sirkuit sateuacan ngamimitian.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Pasang Bracket Pasang:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Sambungan Kawat:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Pasang Lampu Lampu:
   • Taliti keun sadaya kawat kana kotak simpang.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Mulangkeun Daya: Hurungkeun deui kakuatan dina circuit breaker.

Gambar 4: Pituduh visual pikeun prosés pamasangan.

Parentah Operasi

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Milih Mode Operasi:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • Otomatis: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • ON: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 detik
   • 120S: 120 detik (2 menit)
   • 180S: 180 detik (3 menit)

Figure 5: Switches for adjusting hold time and operating modes.

Pangropéa

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• beberesih: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Umur LED: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• Pamariksaan: Périodik pariksa fixture pikeun sagala tanda karuksakan atawa sambungan leupas. Upami aya masalah, pegatkeun sambungan listrik sareng konsultasi ka tukang listrik anu mumpuni.

Pamérésan masalah

Upami anjeun ngalaman masalah sareng lampu anjeun, tingali masalah sareng solusi umum ieu:

spésifikasi

Garansi sareng Rojongan

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN websitus. Simpen resi pameseran anjeun salaku bukti pameseran.