SILCA Sicuro Titanium Water Bottle Cage (V2, SI/160877)

Buku Panduan Kandang Botol Cai Titanium SILCA Sicuro

merek: SILCA | model: Sicuro Titanium Water Bottle Cage (V2, SI/160877)

Bubuka

This manual provides essential information for the proper installation, operation, and maintenance of your SILCA Sicuro Titanium Water Bottle Cage. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.

Produk Leuwihview

The SILCA Sicuro Titanium Water Bottle Cage is a lightweight and durable accessory designed for secure bottle retention on bicycles. Crafted from titanium, it offers a balance of strength and minimal weight, featuring a 21mm fore/aft adjustment for precise positioning.

SILCA Sicuro Titanium Water Bottle Cage, front view

Gambar 1: Hareupeun view of the SILCA Sicuro Titanium Water Bottle Cage, showcasing its design and rainbow finish.

SILCA Sicuro Titanium Water Bottle Cage, side view

Gambar 2: Samping view of the SILCA Sicuro Titanium Water Bottle Cage, highlighting its profile jeung konstruksi.

Setup sareng Instalasi

  1. Nyiapkeun Titik Pasang: Locate the two threaded inserts on your bicycle frame, typically on the down tube or seat tube. Ensure these are clean and free of debris.
  2. Posisi kandang: Align the mounting slots on the SILCA Sicuro cage with the threaded inserts on your frame. The cage features 21mm of fore/aft adjustment, allowing you to slide it up or down to your preferred position.
  3. Amankeun nganggo baut: Insert two appropriate M5 bolts (not included with the cage) through the cage's mounting slots and into the frame's threaded inserts.
  4. Kencangkeun Bolts: Using an appropriate hex key, tighten the bolts evenly until the cage is secure. Do not overtighten, as this can damage the frame or the cage. Ensure the cage does not rotate or move when firm pressure is applied.
  5. Test Fit Bottle: Insert a water bottle into the cage to confirm a secure fit and proper clearance.
SILCA Sicuro Titanium Water Bottle Cage installed on a bicycle frame

Gambar 3: The water bottle cage securely installed on a bicycle frame, demonstrating proper alignment and fit.

Klip 1: Hiji leuwihview of the Titanium Water Bottle Cage, demonstrating its features and installation process. This video is provided by the seller.

Parentah Operasi

The SILCA Sicuro Titanium Water Bottle Cage is designed for straightforward use:

  • Inserting a Bottle: Gently slide your water bottle into the cage from the top. The cage's design ensures a snug fit, holding the bottle securely.
  • Removing a Bottle: Pull the water bottle firmly upwards to remove it from the cage. The cage's flexible yet secure design allows for easy in-and-out access during rides.
  • Kasaluyuan: This cage is optimized for standard bicycle water bottles.

Pangropéa

To ensure the longevity and performance of your water bottle cage, follow these maintenance guidelines:

  • beberesih: Lap kandangna ku iklanamp cloth to remove dirt and grime. For stubborn marks, a mild soap solution can be used, followed by rinsing and drying.
  • Pamariksaan: Periodically inspect the cage for any signs of damage, such as cracks or bends. Check the mounting bolts for tightness and re-tighten if necessary.
  • Perawatan Bahan: Titanium is highly corrosion-resistant. Avoid using abrasive cleaners or tools that could scratch the surface.

Pamérésan masalah

MasalahMungkin Cukang lantarananaSolusi
Bottle feels loose in cage.Cage may have slightly widened over time or bottle is undersized.Gently bend the cage arms inward slightly to increase tension. Ensure your bottle is a standard size.
Bottle falls out during rides.Insufficient tension or improper bottle size.Adjust cage tension as described above. Verify bottle compatibility. For very rough terrain, consider additional bottle retention methods if issues persist.
Cage is rattling.bolts ningkatna leupas.Check and tighten the mounting bolts securely.

spésifikasi

  • merek: SILKA
  • model: Sicuro Titanium Water Bottle Cage (V2)
  • Jumlah modél: SI/160877
  • Bahan: titanium
  • warna: Rainbow (as per product variant)
  • Ukuran produk: 7 "L x 4" W x 4" H
  • Beurat barang: 1.6 ons
  • Penyesuaian: 21mm Fore/Aft
  • UPC: 810093160877
  • Pabrikan: Hand bent and laser welded in Indiana, USA.

Garansi sareng Rojongan

For warranty information or technical support, please refer to the official SILCA websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen bukti pameseran anjeun pikeun klaim garansi.

Resmi Websitus: www.silca.cc

Dokumén Patali - Sicuro Titanium Water Bottle Cage (V2, SI/160877)

Praview Silca Futura AS Guide Gancang Mimitian: Setup jeung Operasi
Mimitian gancang sareng mesin motong konci Silca Futura USA. Pituduh ieu nyertakeun setelan awal, sambungan tablet, konfigurasi software, sareng navigasi dasar pikeun operasi anu efisien.
Praview Manual de Instrucciones SILCA Twister II NA: Guía Completa de Uso y Mantenimiento
Manual detallado instruksi pikeun mesin duplicadora de llaves SILCA Twister II NA. Instalasi Cubre, operación, mantenimiento, kaamanan jeung spésifikasi técnicas pikeun duplikat llaves punzonadas, regatas (laser) jeung FICHET.
Praview Mesin Motong Konci Manual SILCA D844063ZB Fastbit
A manual key cutting machine by Silca, the Fastbit D844063ZB is suitable for duplicating various key types including bit, double bit (male & female), pump keys, and central stop keys. It features a user-friendly design, high-quality materials, a spring-loaded micrometric tracer point, self-centering clamps, and ergonomic controls for precise and reliable operation.
Praview Manual Operasi SILCA RW4 Plus: Panduan Duplikasi Konci Transponder
Manual operasi lengkep pikeun mesin duplikasi konci transponder SILCA RW4 Plus. Ngawengku fitur, pamasangan, operasi, pangropéa, sareng ngungkulan masalah pikeun pamrograman konci kendaraan.
Praview Silca Twister II NA Key-Motong Mesin Manual Operasi
Manual operasi komprehensif pikeun mesin motong konci Silca Twister II NA, detailing fitur na, instalasi, operasi, pangropéa, sarta prosedur kaamanan pikeun sagala rupa jenis konci kawas dimple, laser, sarta kenop FICHET.
Praview Manual Servis SILCA TECHLA 3.0: Panduan Operasi sareng Pangropéa
Manual perawatan lengkep pikeun mesin ukir sareng motong konci SILCA TECHLA 3.0. Ngawengku operasi sistem, apdet, ngungkulan masalah, sareng prosedur perawatan pikeun kinerja anu optimal.