Echo DCS-2500T Battery Top Handle Chainsaw User Manual

Bubuka

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ECHO eFORCE 56V DCS-2500T Top Handle Chainsaw. This chainsaw is designed for professional and demanding tasks, offering superior performance and lightweight handling.

Émbaran Kasalametan

Always read and understand all safety warnings and instructions before operating the chainsaw. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

Aturan Kasalametan Umum

• Wear appropriate personal protective equipment (PPE) including head protection, eye protection, hearing protection, gloves, and safety footwear.
• Jaga sadaya jalma anu aya, barudak, sareng piaraan sahenteuna 50 suku (15 méter) tina tempat damel.
• Do not operate the chainsaw in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Salawasna jaga pijakan sareng kasaimbangan anu leres. Ulah ngaleuwihan wates.
• Avoid accidental starting. Ensure the power button is off before picking up or carrying the tool.

Kaamanan Khusus Gergaji Mesin

• Salawasna tahan ragaji pageuh ku dua leungeun nalika operasi.
• Be aware of kickback. Kickback may occur when the moving chain contacts an object at the upper quadrant of the guide bar or when the wood closes in and pinches the saw chain in the cut.
• Do not operate the chainsaw with one hand. One-handed operation may result in serious injury to the operator, helpers, or bystanders.
• Ensure the chain brake is engaged when starting the chainsaw and when moving between cuts.
• Rutin pariksa tegangan ranté sarta lubrication.

Disetél

Your ECHO DCS-2500T chainsaw requires minimal assembly before first use.

Eusi pakét

• ECHO DCS-2500T Chainsaw Unit
• 12-inch Guide Bar
• Ranté ragaji
• 56V 2.5Ah eFORCE Battery
• eFORCE Battery Charger
• Panuntun Bar Cover
• Manual Operator

Parentah Majelis

1. Install Guide Bar and Chain:

   Remove the side cover by loosening the bolt.

   Carefully place the chain around the drive sprocket and then align it with the groove of the guide bar.

   Position the guide bar and chain onto the chainsaw body, ensuring the chain tension pin fits into the hole on the guide bar.

   Replace the side cover and hand-tighten the bolt. Do not fully tighten yet.

   

   Image: A user demonstrating the assembly of the chainsaw, highlighting the guide bar and chain attachment point.
2. Saluyukeun tegangan Ranté:

   Use the chain tensioning screw (usually located on the side cover) to adjust the chain tension. The chain should be snug against the guide bar but still able to be pulled freely by hand.

   Once tension is correct, fully tighten the side cover bolt.

3. Fill Oil Reservoir:

   Locate the oil reservoir cap on the chainsaw body.

   Fill the reservoir with high-quality bar and chain oil. Do not use motor oil or other lubricants.

   

   Image: The Echo DCS-2500T chainsaw, its battery, and charger. The oil reservoir cap is visible on the chainsaw body.

Ngeusi batre

1. Ngeusi batre:

   Insert the 56V eFORCE battery into the charger. Ensure it clicks into place.

   Sambungkeun carjer ka stopkontak standar.

   The charger's LED indicators will show the charging status (e.g., red for charging, green for fully charged).

   Ngidinan batré ngeusi pinuh saméméh pamakéan munggaran.

2. Pasang Batré:

   Saatos dicas pinuh, cabut batré tina carjer.

   Insert the battery into the battery compartment of the chainsaw until it locks securely.

Parentah Operasi

Ngamimitian Chainsaw

1. Pastikeun ranté rem geus dicabut (ditarik deui ka arah gagang hareup).
2. Press the power button (usually indicated by a power symbol) to turn on the chainsaw. A green indicator light will illuminate.
3. Grasp the front handle with your left hand and the rear handle with your right hand.
4. Depress the safety lock-out button (if present) and then squeeze the trigger to start the chain.

Téhnik motong

• Nanjak: Remove branches from a fallen tree. Work from the bottom up, cutting small branches first.
• Ngabuburit: Cut a fallen log into sections. Use a sawhorse or elevated support to prevent the chain from hitting the ground.
• Tegalan: (For experienced users only) Carefully plan the felling direction, clear the area, and make proper felling cuts.

Ngeureunkeun Gergaji Mesin

Release the trigger. The chain will stop immediately.

Engage the chain brake by pushing it forward.

Press the power button to turn off the chainsaw for storage or extended breaks.

Pangropéa

Pangropéa anu rutin mastikeun kinerja anu optimal sareng manjangkeun umur gergaji mesin anjeun.

Sanggeus Unggal Paké

• Clean the Chainsaw: Remove sawdust, chips, and debris from the guide bar, chain, and motor housing.
• Pariksa Chain Tension: Adjust if necessary.
• Pariksa Tingkat Minyak: Refill the bar and chain oil reservoir.
• Inspect Chain: Check for dullness, damage, or loose rivets. Sharpen or replace as needed.
• Inspect Guide Bar: Check for burrs or wear.

Pangropéa périodik

• Sharpen Chain: A sharp chain cuts efficiently and safely. Use a round file of the correct size for your chain.
• Saringan Udara Bersih: (If applicable, though battery models often have less complex filters) Refer to the specific instructions for your model.
• Check Battery and Charger: Ensure they are free from damage and functioning correctly.

Pamérésan masalah

spésifikasi

• Modél: DCS-2500-12C1
• merek: Echo
• Bar Panjang:12 inci
• Sistem Batré: ECHO eFORCE 56V
• Kapasitas batré: 2.5 ahk
• Tipe Motor: Tanpa sikat
• Item Beurat: 1 ons
• Dimensi produk: 14"L x 14"W x 14"H
• Daya kuda: 5.3 hp
• Tanggal Sadia munggaran: 6 Méi 2022

Garansi sareng Rojongan

For warranty information and technical support, please refer to the official Echo product registration or contact Echo customer service directly. Keep your purchase receipt for warranty claims.

Visit Echo Support Websitus