Weiser SmartCode Keypad Electronic Deadbolt Instruction Manual

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your Weiser SmartCode Keypad Electronic Deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the security features of your lock. This electronic deadbolt offers keyless entry with a backlit keypad, multiple user codes, and SmartKey re-key technology.

Figure 1: Weiser SmartCode Keypad Electronic Deadbolt (Exterior and Interior Units)

2. Émbaran Kasalametan

• Read all instructions completely before installing and operating the lock.
• Do not attempt to disassemble the lock. This may void the warranty.
• Use only the specified battery type (4 AA alkaline batteries). Do not mix old and new batteries or different types of batteries.
• Keep your user codes and master code confidential.
• Ensure the door frame is secure and the strike plate is properly installed for optimal security.

3. Komponén Kaasup

Pariksa yén sadaya bagian aya sateuacan ngamimitian pamasangan:

Figure 2: Contents of the Box

• Rakitan Deadbolt Éksterior
• Rakitan Deadbolt Interior
• Latch adjustable
• Piring neunggeul
• Kerah
• Lempeng Pamasangan
• Perangkat Keras Pemasangan (sekrup)
• 2 Konci Weiser
• Alat SmartKey
• Pituduh Instalasi (manual ieu)

4. Setup jeung Instalasi

The Weiser SmartCode Keypad Electronic Deadbolt is designed for easy installation. For detailed, interactive 3D instructions with voice and video guidance, it is recommended to use the free BILT app.

4.1 Kasaluyuan panto

This deadbolt is compatible with standard doors measuring 1-3/8" to 1-3/4" (35mm to 44mm) thick. It features an adjustable backset for both 2-3/8" (60mm) and 2-3/4" (70mm) settings. It is suitable for most exterior and interior residential doors.

4.2 Léngkah-léngkah Pamasangan (Leuwihview)

1. Nyiapkeun lawang: Ensure your door is properly prepped with the correct bore holes and backset.
2. Pasang Latch: Insert the adjustable latch into the door edge and secure it with screws. Adjust the backset if necessary.
3. Pasang Keypad Luar: Route the cable from the exterior keypad through the door and position the keypad on the exterior side.
4. Pasang Plat Pemasangan: Secure the interior mounting plate to the door, connecting it to the exterior keypad.
5. Pasang Majelis Interior: Connect the cable from the exterior keypad to the interior assembly. Mount the interior assembly onto the mounting plate and secure it.
6. Pasang Batré: Insert 4 AA alkaline batteries into the interior assembly.
7. Ngalaksanakeun Prosés Ngabuka Panto: This step is crucial for the lock to learn the orientation of your door. Follow the specific instructions in the BILT app or the included quick start guide.

For detailed visual instructions, refer to the BILT app or the comprehensive installation guide included in the packaging.

Figure 3: Suitable Applications for the Deadbolt

5. Parentah Operasi

5.1 Ngonci Panto

• Ngonci Hiji-Toél: Press the Lock button (padlock icon) on the keypad. The deadbolt will extend, securing the door.
• Fitur Otomatis-Konci: The lock can be programmed to automatically re-lock after a set period (e.g., 30 seconds) after unlocking. Refer to the programming section for details on enabling/disabling this feature.

Figure 4: One-Touch Auto-Lock in Action

5.2 Muka konci Panto

• Ngagunakeun Kode pamaké: Enter your personalized 4-8 digit user code on the keypad. The deadbolt will retract, unlocking the door.
• Ngagunakeun konci: Selapkeun konci fisik kana alur konci teras puter pikeun muka konci.

Figure 5: Keyless Entry via Keypad

5.3 Keypad Features

• Keypad lampu tukang: The keypad illuminates for increased visibility in low-light conditions and remains lit for 30 seconds after inactivity.

Figure 6: Backlit Keypad for Low Light Conditions

5.4 Kodeu Pamaké Programming

The lock supports up to 50 unique user access codes and one master code. The master code is used for programming and managing user codes.

Figure 7: Multiple User Access Codes Feature

Refer to the full programming instructions in the included guide for detailed steps on adding, deleting, and modifying user codes and the master code.

5.5 SmartKey Re-Key Technology

SmartKey Security allows you to re-key your lock yourself in seconds, providing flexibility and control over your keys. This is useful in situations such as moving to a new home, losing keys, or managing multiple doors with a single key.

Figure 8: SmartKey Re-Keying Process

Pikeun masang deui konci anjeun:

1. Insert your functioning key (the key that currently operates the lock) and turn it 90 degrees clockwise.
2. Insert the SmartKey tool fully into the SmartKey hole.
3. Cabut alat SmartKey.
4. Cabut konci anjeun anu masih kénéh tiasa dianggo.
5. Selapkeun konci anyar anjeun sacara lengkep teras puterkeun 180 derajat ka arah anu sabalikna tina jarum jam.
6. Cabut konci anyar. Koncina ayeuna dipasangkeun deui kana konci anyar.

6. Pangropéa

6.1 Ngagantian batré

The deadbolt operates on 4 AA alkaline batteries. When the batteries are low, the lock will provide an audible and/or visual low battery warning. Replace all four batteries simultaneously with new, high-quality alkaline batteries.

Figure 9: Battery Compartment and 12-Month Battery Life

Expected battery life is approximately 12 months under normal usage conditions.

6.2 beberesih

Bersihkeun konci nganggo sabun anu lemes,amp lawon. Ulah nganggo pembersih atanapi pangleyur anu abrasif, sabab ieu tiasa ngaruksak lapisan sareng komponén éléktronik.

7. Cara ngungkulan

If you encounter issues with your Weiser SmartCode deadbolt, refer to the following common troubleshooting steps:

• Konci henteu ngabales: Pariksa tingkat batré jeung ngaganti lamun perlu. Pastikeun batréna diselapkeun kalayan polaritasna anu leres.
• Keypad teu hurung: Replace batteries. If the issue persists, contact support.
• Lock not locking/unlocking: Perform the door handing process again. Check for any obstructions in the door frame or latch. Verify user codes are correctly programmed.
• Difficulty re-keying: Ensure the functioning key is fully inserted and turned 90 degrees. Make sure the SmartKey tool is fully inserted into the hole.
• Frequent low battery warnings: Ensure you are using new, high-quality alkaline batteries. Extreme temperatures can affect battery performance.

For more complex issues, consult the full troubleshooting guide available on the Weiser websitus atanapi ngahubungan rojongan customer.

8. Spésifikasi

Gambar 10: Dimensi Produk

9. Émbaran jaminan

This Weiser SmartCode Keypad Electronic Deadbolt comes with a 1-year warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Weiser websitus.

10. Rojongan

For further assistance, technical support, or to purchase replacement parts, please contact Weiser customer service. Contact information can typically be found on the Weiser websitus atanapi dina bahan bungkusan.

Anjeun oge bisa nganjang ka Toko Weiser di Amazon pikeun émbaran produk tambahan jeung sumber.