IMEX VCC012 Click-Clack Drain Valve Instruction Manual

1. Bubuka

Thank you for choosing the IMEX VCC012 Click-Clack Drain Valve. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new drain valve. Please read this manual thoroughly before installation and keep it for future reference.

2. Produk Langkungview

The IMEX VCC012 is a versatile click-clack drain valve designed for washbasins and bidets. It features a durable brushed brass construction and a reliable pop-up mechanism.

• Kasaluyuan Universal: Suitable for all types of washbasins or bidets, with or without an overflow.
• Konstruksi awét: Made of brass with a brushed nickel finish.
• Reliable Mechanism: Its click-clack opening and closing system is guaranteed for over 20,000 uses.
• Pamasangan Gampang: Features a 1 1/4 inch bottom thread for quick and simple mounting.
• Sistem Anti-Kerak Kapur: Integrated anti-limescale system for enhanced resistance and increased durability.

Figure 2.1: IMEX VCC012 Click-Clack Drain Valve. This image shows the complete drain valve assembly with its brushed steel finish and pop-up cap.

3. Émbaran Kasalametan

Punten perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan produk:

• Always turn off the water supply before beginning any installation or maintenance work.
• Anggo alat pelindung pribadi anu pas, sapertos sarung tangan sareng panyalindungan panon, nalika dipasang.
• Pastikeun sadaya sambungan kedap pikeun nyegah bocor. Ulah overighten.
• Upami anjeun henteu yakin kana bagian mana waé tina prosés pamasangan, konsultasi ka tukang ledeng anu mumpuni.
• Jauhkeun bagian leutik tina jangkauan barudak.

4. Setup jeung Instalasi

The IMEX VCC012 drain valve is designed for simple and quick installation. Follow these steps:

Figure 4.1: Technical drawing with dimensions. This diagram illustrates the key dimensions of the drain valve, including the cap diameter (Ø63), body diameter (Ø62), height (40mm), and thread size (G 1 1/4).

1. Prepare the Sink/Bidet: Ensure the drain hole in your washbasin or bidet is clean and free of debris.
2. Ngabongkar solokan: Separate the upper and lower parts of the drain valve. The large white washer and rubber gasket typically go on the underside of the sink.
3. Position the Upper Part: Place the upper part of the drain valve (with the pop-up cap) into the drain hole from the top of the sink/bidet. Ensure any sealing washers are correctly positioned.
4. Attach the Lower Part: From underneath the sink/bidet, slide the rubber gasket and then the large white washer onto the threaded shaft of the drain valve.
5. Amankeun Murna: Thread the locking nut onto the shaft and tighten it by hand. Use a wrench to gently tighten further, ensuring a watertight seal without overtightening.
6. Connect to Plumbing: Connect your existing waste pipe to the 1 1/4 inch bottom thread of the drain valve. Ensure this connection is also watertight.
7. Uji pikeun Bocor: Turn on the water supply and fill the sink/bidet. Check carefully for any leaks around the drain valve and plumbing connections.

Note: For installations with an overflow, ensure the overflow channel of your sink/bidet aligns with the drain valve's design if applicable. This universal valve is designed to work with or without overflow.

5. Parentah Operasi

The IMEX VCC012 drain valve features a simple click-clack pop-up mechanism:

• Pikeun nutup solokan: Press down firmly on the center of the pop-up cap. You will hear a "click" as it locks into the closed position, sealing the drain and allowing the basin eusian ku cai.
• Pikeun muka solokan: Press down firmly on the center of the pop-up cap again. You will hear another "click" as it releases and pops up, allowing water to drain freely.

This mechanism is designed for durability and ease of use, ensuring reliable performance over many years.

6. Pangropéa

Proper maintenance will ensure the longevity and appearance of your IMEX VCC012 drain valve. Follow these cleaning steps:

1. Bersihan awal: Use a soft cotton cloth (dampened only if necessary) to clean the surface of the drain valve. Gently rubbing will remove most dirt without damaging the material. Do not use abrasive sponges or brushes.
2. Ngaleungitkeun Kerak: Limescale residues primarily accumulate in corners and joints. Use a mild cleaner based on citric acid. Do not spray the concentrated cleaner directly onto the drain valve; instead, apply it to a cloth.
3. Aerator Cleaning (if applicable): If your drain valve has an aerator (though less common for a drain valve, this instruction is adapted from the original description for a faucet), it can be easily removed for cleaning. Immerse it in warm water with a little cleaner; deposits will dissolve after about ten minutes.
4. Bilas sacara saksama: Wash the drain valve thoroughly with clean water to remove all cleaning product residues.
5. Polandia pamungkas: Repeat the initial cleaning step with a soft cotton cloth to completely remove any remaining cleaning product residues and give the surface a brilliant finish.

penting: We recommend using a mild, citric acid-based cleaning product. Strong cleaning concentrates can irritate skin and eyes, cause allergies, and damage the material of the drain valve over time.

7. Cara ngungkulan

If you encounter issues with your IMEX VCC012 drain valve, refer to the following common problems and solutions:

• Leakage around the drain:
  • Ensure all nuts and connections are securely tightened. Do not overtighten.
  • Check if the sealing washers are correctly positioned and not damaged. Replace if necessary.
  • Apply plumber's putty or silicone sealant around the top flange if the leak persists (ensure it's suitable for plumbing applications).
• Drain not closing/opening properly (Click-Clack mechanism issue):
  • Remove the pop-up cap by unscrewing it (if possible) or pulling it firmly. Clean any debris or hair that might be obstructing the mechanism.
  • Inspect the internal spring mechanism for damage. If the spring is broken, the unit may need replacement.
• Slow draining:
  • Remove the pop-up cap and clean any accumulated hair, soap scum, or debris from the drain opening and the underside of the cap.
  • Check the connected waste pipe for blockages further down the plumbing system.

Lamun masalah persists sanggeus nyobian solusi ieu, mangga ngahubungan rojongan customer.

8. Spésifikasi

9. Garansi jeung Rojongan

IMEX products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the documentation provided with your purchase or visit the official IMEX websitus.

If you require technical assistance or have questions not covered in this manual, please contact IMEX customer support through their official channels. Please have your model number (VCC012) and purchase details ready when contacting support.