Bubuka
Thank you for choosing the Total Tools TABLI20018 Lithium-ion Blower. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new blower. Please read this manual thoroughly before first use and keep it for future reference.
Image: Total Tools TABLI20018 Lithium-ion Blower, showing the main unit with the nozzle attached.
Parentah Kasalametan penting
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury. Read all instructions before using this product.
- Kasalametan Pribadi: Always wear eye protection, hearing protection, and sturdy footwear. Do not operate the blower while barefoot or wearing open-toed sandals.
- Wewengkon Gawé: Tetep wewengkon gawé beresih jeung well-cahayana. Ulah beroperasi dina atmosfir ngabeledug, kayaning ku ayana cairan kaduruk, gas, atawa lebu.
- Kasalametan listrik: This appliance is battery-powered. Ensure the battery pack is fully charged before use. Do not expose the battery pack or blower to rain or wet conditions.
- Barudak sareng Panyusun: Keep children and bystanders away while operating the blower.
- Pamakéan ditangtoskeun: Use the blower only for its intended purpose, which is to move leaves, dirt, and debris. Do not point the nozzle at people or animals.
- Pangropéa: Disconnect the battery pack before performing any adjustments, changing accessories, or storing the blower.
Komponén produk
Familiarize yourself with the parts of your Total Tools TABLI20018 blower before operation.
- Blower Unit (Motor Housing and Handle)
- Blower Nozzle
- Battery Compartment (Battery and charger sold separately)
- Hurung / Pareum pemicu
- Speed Control Pindah
Image: Total Tools TABLI20018 Blower, illustrating the P20S 20V system and indicating that battery and charger are sold separately.
Setup sareng Majelis
Follow these steps to prepare your blower for use.
- Ngabongkar bungkusan: Sacara saksama miceun sadaya komponén tina bungkusan. Mariksa karusakan naon waé.
- Attach the Blower Nozzle: Align the blower nozzle with the outlet on the main blower unit. Push and twist until it locks securely into place. Ensure it is firmly attached before operation.
- Pasang Batré Pack: Ensure the battery pack is fully charged. Slide the charged battery pack into the battery compartment on the blower handle until it clicks into place. Ensure it is seated correctly.
Gambar: Sisi view of the Total Tools TABLI20018 Blower, showing the main unit without the nozzle, highlighting the handle and battery slot.
Parentah Operasi
Sateuacan dianggo, pastikeun anjeun parantos maca sareng ngartos sadaya pitunjuk kaamanan.
- Ngamimitian Blower: With the battery installed, press the On/Off trigger to start the blower.
- Nyaluyukeun Speed: If your model has a speed control switch, adjust it to the desired airflow for the task. The blower features 2 speeds.
- Operating Technique:
- Cekel blower pageuh-pageuh ku hiji leungeun dina gagangna.
- Sweep the nozzle from side to side, directing debris away from yourself and others.
- Work in small sections to maintain control.
- Avoid blowing debris towards open windows, cars, or water sources.
- Ngeureunkeun Blower: Release the On/Off trigger to stop the blower.
- Saatos Paké: Remove the battery pack from the blower after each use to prevent accidental starting and for safe storage.
Pangropéa sarta Panyimpenan
Pangropéa rutin mastikeun kinerja anu optimal sareng manjangkeun umur blower anjeun.
- beberesih:
- Salawasna cabut pak batré saméméh beberesih.
- Ngusap bagian luar blower nganggo iklanamp lawon. Ulah make detergents kuat atawa pangleyur.
- Clear any debris from the air intake vents and blower nozzle to ensure proper airflow.
- Panyimpenan:
- Simpen blower di tempat anu garing, aya ventilasina anu saé, sareng teu kahontal ku barudak.
- Cabut pak batré sateuacan disimpen kanggo waktos anu langkung lami.
- Simpen pak batré di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
Gambar: Angled view of the Total Tools TABLI20018 Blower, showing the air intake grille on the side of the motor housing.
Pamérésan masalah
Tingali kana bagian ieu pikeun masalah umum sareng solusina.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Blower henteu ngamimitian. | Batré teu dipasang leres atanapi discharged. | Pastikeun batréna geus dicas pinuh tur seated bener. |
| Ngurangan aliran hawa. | Asupan hawa atanapi nozzle diblokir ku lebu. | Remove battery, then clear any obstructions from the air intake and nozzle. |
| Blower eureun salila operasi. | Batré overheated atanapi discharged. | Allow battery to cool down or replace with a fully charged battery. |
| Geter kaleuleuwihi. | Loose nozzle or internal debris. | Check nozzle attachment. Remove battery and inspect for internal debris. If problem persists, contact customer support. |
spésifikasi
Technical data for the Total Tools TABLI20018 Lithium-ion Blower.
| Fitur | Rincian |
|---|---|
| Modél | TABLI20018 |
| merek | Total |
| Voltage | 20 volt |
| Laju | 18000 rpm |
| Volume hawa | 2.7 m³ / mnt |
| Gaya | Dicekel |
| Sumber Daya | Didukung ku Batré (Litium-ion) |
| Item Beurat | 739 g (1.63 Pon) |
| Dimensi produk | 10 x 10 x 10 cm (kira-kira) |
| Fitur husus | Lightweight, 2-speed |
| Komponén Kaasup | Blower unit only (battery and charger sold separately) |
Image: Size comparison of the Total Tools TABLI20018 Blower, indicating a length of approximately 17 cm (7.0 inches).
Garansi sareng Rojongan
Specific warranty information for the Total Tools TABLI20018 blower is typically provided with the product packaging or can be obtained from the point of purchase. For technical support, service, or to inquire about replacement parts, please contact Total Tools customer service or visit their official websitus.
