AUTOPHIX 7360 Full Systems Diagnostic Scan Tool

1. Bubuka

The AUTOPHIX 7360 is a professional full systems diagnostic scan tool designed specifically for Toyota, Lexus, and Scion vehicles manufactured after 1996. This device provides comprehensive diagnostic capabilities, allowing users to read and clear fault codes, view live data streams, and perform various special functions across all major vehicle systems. Its user-friendly interface and robust features make it an essential tool for vehicle maintenance and troubleshooting.

Image 1.1: The AUTOPHIX 7360 diagnostic scan tool, featuring its display screen, navigation buttons, and OBDII connector cable.

2. Setélan

2.1 Eusi pakét

Pastikeun yén sadaya komponén aya dina bungkusan:

• AUTOPHIX 7360 Diagnostic Scan Tool
• Kabel OBDII (terintegrasi)
• Manual pangguna (dokumén ieu)
• Kabel USB (kanggo apdet, upami aya)

2.2 Nyambungkeun ka Kandaraan

1. Panggihan 16-pin Data Link Panyambung (DLC) kendaraan. Ieu ilaharna kapanggih dina dasbor di sisi supir urang.
2. Pastikeun ignition kendaraan aya dina posisi OFF.
3. Firmly plug the AUTOPHIX 7360's OBDII cable into the vehicle's DLC.
4. Turn the vehicle's ignition to the ON position (engine off). The device will power on automatically.

3. Parentah Operasi

3.1 Fungsi Dasar OBDII

The AUTOPHIX 7360 provides comprehensive OBDII diagnosis for all OBDII compliant vehicles (after 1996). Navigate to the 'OBDII' menu option on the device.

Image 3.1: Screen illustrating the full OBDII functions, including Read & Erase Error Codes, Data Stream, EVAP System, DTC Lookup, Vehicle Information, I/M Readiness, Turn Off MIL, and System Status.

• Read & Erase Error Codes: Retrieve Diagnostic Trouble Codes (DTCs) and clear them from the vehicle's ECU.
• Aliran Data Langsung: View real-time sensor data from the vehicle's various systems.
• Tes Kesiapan I/M: Check the readiness of the emission-related monitors.
• Uji Sistem EVAP: Laksanakeun tés dina Sistem Kontrol Émisi Évaporatif.
• Émbaran Kandaraan: Display the vehicle's VIN, Calibration ID, and Calibration Verification Number.
• Pilarian DTC: Provides definitions for generic and manufacturer-specific trouble codes.

3.2 Advanced Diagnostic Functions (Full Systems)

This tool can access and diagnose all major systems in Toyota, Lexus, and Scion vehicles. Select the 'For Toyota' menu option to begin a full system scan.

Image 3.2: Display showing the range of full system diagnostics, including Transmission, Air Conditioner, Front Radar Sensor, Immobilizer, Central Gateway, Tire Pressure Monitor, Engine System, SRS Airbag, Navigation System, TMPS System, Audio System, Cruise Control, Active Noise Control, Theft Deterrent, Power Source Control, Steering Pad Switch, Combination Master Switch, Road Sign Assist, and Clearance Warning.

Supported systems include, but are not limited to:

• Sistem Mesin
• Sistem ngerem Anti Konci (ABS)
• Supplemental Restraint System (SRS/Airbag)
• Sénsor Sudut Setir (SAS)
• Sistem Manajemén Batré (BMS)
• Rem Parkir Éléktronik (EPB)
• Sistem Pangimeutan Tekanan Ban (TPMS)
• Pangiriman
• AC
• Sénsor Radar hareup
• Immobilizer
• System Napigasi
• Sistim Audio
• Cruise Control
• Hybrid Control (as shown in Image 3.3)
• Smart Key System (as shown in Image 3.3)

Gambar 3.3: Examples of professional diagnostic functions, including Air Bleeding, Reset Memory, Initialization, Hybrid Control, Sliding Roof, Steering Angle Adjust, Smart Key, Electronic Parking Brake, Steering Angle Learning, AFS, Sound System, and Interior Monitoring.

3.3 Fungsi Service husus

The AUTOPHIX 7360 supports a wide array of special functions for maintenance and service resets. Navigate to the 'Special Functions' menu.

Gambar 3.4: Leuwihview of advanced full functions, including Service Reset, TMPS Reset, SAS Reset, Battery Registration, Throttle Learning, Airbag Reset, Oil Reset, DPF Reset, ABS Bleeding, EPB Reset, BMS Reset, SRS Reset, ETCS Reset, Injector Coding, DPF Regeneration, and CBS Reset.

• Reset minyak: Reset lampu jasa oli sanggeus ganti oli.
• Pangajaran Throttle: Diajar deui posisi awak gas.
• Reset EPB (Rem Parkir Éléktronik): Deactivate and reactivate the brake control system, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement.
• Reset TPMS (Sistem Pemantauan Tekanan Ban): Reset tire pressure values after tire rotation or sensor replacement.
• Injector Quantity Adjustment: Adjust injector coding after replacement.
• DPF (Diesel Particulate Filter) Reset/Regeneration: Perform DPF regeneration and reset the DPF light.
• Pendaptaran batré: Register a new battery to the vehicle's Battery Management System (BMS).
• Airbag Reset: Clear airbag crash data.
• Steering Angle Sensor (SAS) Learning: Kalibrasi sensor sudut setir.
• Perdarahan ABS: Perform brake bleeding procedures.
• BMS Reset: Reset the Battery Management System.
• ETCS Reset: Electronic Throttle Control System reset.

3.4 Manajemén batré

The device offers accurate battery health checks and a professional battery registration function.

Image 3.5: Visual guide for accurate battery check, showing voltage ranges for Too Low, Normal, Slightly Low, and Too High conditions before and after starting the car.

Pariksa batré: The tool can display the current battery status, indicating voltage levels before and after starting the vehicle to assess battery health.

Image 3.6: Step-by-step guide for battery registration, including scenarios for dead battery, replacing original battery, replacing with same capacity battery, choosing registration screen, entering 12 digits, and starting the engine.

Pendaptaran batré: When replacing a vehicle battery, it is crucial to register the new battery with the vehicle's ECU to ensure proper charging and battery life. The 7360 allows you to:

1. Store current battery and mileage readings for replacement records.
2. Delete stored measurement values (charge state, current, voltage, suhu, jsb).
3. Initialize the battery management system for the new battery.

4. Compatibility and Language Support

The AUTOPHIX 7360 is designed for broad compatibility with Toyota, Lexus, and Scion vehicles from 1996 onwards.

Image 4.1: Visual representation of broad compatibility for Lexus, Toyota, and Scion models, along with flags indicating 12 supported languages.

4.1 Kasaluyuan Kandaraan

The tool supports a wide range of models within the Toyota, Lexus, and Scion families, including but not limited to:

• Lexus: CT, ES, GS, GX, HS, IS, LC, LFA, LM, LS, LX, NX, RC, RX, SC, UX.
• Toyota: Rav4, Camry, Corolla, 4Runner, Highlander, C-HR, Aqua, Alphard, Corolla Cross, Crown, FJ Cruiser, Avalon, Land Cruiser, Mirai, Prius, Sequoia, Sienna, Supra, Tacoma, Tundra, Venza, Yaris.
• Scion: FR-S, iA, iM, iQ, iQ EV, tC, xA, xB, xD.

4.2 Rojongan Basa

The device supports 12 languages, allowing users from various regions to operate the tool comfortably:

• Inggris
• Jerman
• Perancis
• Italia
• Spanyol
• Portugis
• Polandia
• Rusia
• Norwegia
• Denmark
• Swédia
• Finnish (Suomalainen)

5. Pangropéa

5.1 beberesih

Pikeun ngajaga kinerja sareng penampilan alat, bersihan sacara rutin nganggo lap anu lemesamp lawon. Ulah make cleaners abrasive atawa pangleyur.

5.2 Panyimpenan

When not in use, store the AUTOPHIX 7360 in a dry, cool environment, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.

5.3 Apdet parangkat lunak

Periodically check the official AUTOPHIX website for software updates. Updates may include new vehicle models, bug fixes, and improved functionalities. Follow the instructions provided on the website for the update process, typically involving connecting the device to a computer via USB.

6. Cara ngungkulan

If you encounter issues with your AUTOPHIX 7360, refer to the following common troubleshooting steps:

• Alat teu hurung: Ensure the OBDII cable is securely connected to the vehicle's DLC and the vehicle's ignition is in the ON position. Check the vehicle's battery voltage.
• Kasalahan komunikasi: Verify that the vehicle supports the OBDII protocol. Ensure the ignition is ON. Try connecting to a different vehicle to rule out a vehicle-specific issue.
• Layar macet atanapi alat teu responsif: Disconnect the device from the vehicle, wait a few seconds, and then reconnect it. If the issue persists, perform a software update.
• Incorrect readings or functions: Ensure the device software is up to date. Verify that the correct vehicle make/model is selected if prompted.

7. Spésifikasi

8. Garansi jeung Rojongan

For warranty information and technical support, please refer to the official AUTOPHIX websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.