1. Bubuka
The EPOMAKER TH80 Pro is a high-performance 75% layout mechanical gaming keyboard designed for versatility and customization. It features a compact design, hot-swappable switches, tri-mode connectivity (Bluetooth 5.0, 2.4GHz wireless, and USB-C wired), PBT keycaps, and vibrant RGB backlighting. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your TH80 Pro keyboard.
Image: The EPOMAKER TH80 Pro keyboard showcasing its 75% layout and key features like hot-swappable design, tri-mode connectivity, and RGB backlighting.
2. Eusi Paket
Sateuacan anjeun ngawitan, pastikeun sadaya item aya dina pakét anjeun:
- EPOMAKER TH80 Pro Mechanical Keyboard
- USB-C ka USB-A Cable
- Keycap Puller
- Pindah Puller
- Extra Switches (quantity may vary)
- 2.4GHz USB Receiver (stored in the keyboard)
- Manual pangguna (dokumén ieu)
Image: Contents of the EPOMAKER TH80 Pro package, including the keyboard, USB cable, keycap puller, and user manual.
3. Setup jeung Konéktipitas
3.1 Ngahurungkeun sareng Ngecas
Locate the power switch on the underside of the keyboard. Slide it to the 'ON' position to power on the device. To charge the keyboard, connect the provided USB-C cable to the keyboard's USB-C port and the other end to a USB power source. The keyboard features a 4000mAh battery for extended use.
Image: Underside of the EPOMAKER TH80 Pro keyboard, showing the power switch and the storage slot for the 2.4GHz USB receiver.
3.2 Modeu Konéktipitas
The TH80 Pro supports three connectivity modes:
- Modeu Kabel USB-C: Connect the keyboard directly to your device using the USB-C cable. This mode also charges the keyboard.
- Mode Wireless 2.4GHz: Insert the 2.4GHz USB receiver into an available USB port on your computer. The keyboard will automatically connect. The polling rate can reach up to 1000Hz in this mode.
- Modeu Bluetooth 5.0: Kibor tiasa nyambung ka tilu alat Bluetooth.
Image: Diagram illustrating the tri-mode connectivity options of the EPOMAKER TH80 Pro, including USB-C wired, Bluetooth, and 2.4GHz wireless, connecting to various devices like PC, laptop, tablet, and smartphone.
Pitunjuk Nyapasangkeun Bluetooth:
- Pastikeun keyboard diaktipkeun.
- Pencét fn+1, fn+2, atawa fn+3 pikeun milih saluran Bluetooth. Tombol anu saluyu bakal kedip-kedip gancang, nunjukkeun modeu pasangan.
- On your device, search for Bluetooth devices and select "TH80 Pro" to connect.
- Once connected, the key will stop flashing and remain steadily lit.
4. Ngoperasikeun kibor
4.1 Fungsi Konci Dasar
The TH80 Pro features a 75% layout, providing essential keys while maintaining a compact form factor. Standard alphanumeric keys, function row (F1-F12), navigation keys (Page Up, Page Down, Home, End via Fn combinations), and arrow keys are present.
4.2 RGB Backlighting Control
The keyboard features customizable RGB backlighting. Use the following shortcuts to control the lighting effects:
- Fn + Spasi Mundur: Turn on/off backlighting.
- Fn + |\: Toggle through different RGB lighting effects.
- Fn + P: Toggle through different RGB lighting colors.
Image: The EPOMAKER TH80 Pro keyboard displaying its vibrant RGB backlighting, with an overlay showing key combinations for controlling backlight functions.
4.3 Knob Control
The rotary knob located on the top right of the keyboard serves multiple functions:
- Rotasikeun: Nyaluyukeun volume sistem.
- Pencét: Ngajempékeun / nganonaktipkeun audio.
4.4 Programmable Software
The TH80 Pro is compatible with dedicated software for advanced customization. This software allows you to:
- Édit makro.
- Sesuaikeun épék cahaya RGB.
- Remap konci.
- Redefine knob functions.
The software is compatible with Windows and Mac OS. Please visit the official EPOMAKER websitus pikeun ngundeur versi panganyarna.
Image: Screenshot of the EPOMAKER TH80 Pro's programmable software interface, showing options for macro editing, RGB effects, key remapping, and knob redefinition.
4.5 Panas-Swappable switch
The TH80 Pro features a hot-swappable PCB, allowing you to change mechanical switches without soldering. It supports most 3-pin or 5-pin mechanical switches. Use the included switch puller to carefully remove switches and insert new ones.
Gambar: Deukeut view of the EPOMAKER TH80 Pro keyboard demonstrating the hot-swappable switch feature, showing a switch being removed with a switch puller and the underlying hot-swap socket.
5. Pangropéa
5.1 Ngabersihan kibor
Pikeun ngajaga kinerja sareng penampilan anu optimal, bersihan keyboard anjeun sacara rutin:
- Cabut sambungan kibor tina sadaya sumber daya.
- Make lawon anu lemes, teu aya serat dampdikumbah ku saeutik cai atawa larutan pembersih anu hampang pikeun ngusap tutup tombol jeung sasis.
- For deeper cleaning, use the included keycap puller to remove keycaps and clean underneath with compressed air or a small brush.
- Pastikeun kiborna garing pisan sateuacan dipasang deui.
5.2 Keycap sarta Ngagantian Pindah
The PBT keycaps are durable and oil-resistant. If you wish to replace them or the switches:
- Use the keycap puller to gently remove keycaps by hooking it onto the sides of the keycap and pulling upwards.
- Use the switch puller to remove switches by compressing the clips on the top and bottom of the switch and pulling upwards.
- Align new switches carefully with the PCB sockets and press down firmly until they click into place.
- Place new keycaps onto the switch stems and press down until secure.
6. Cara ngungkulan
If you encounter issues with your EPOMAKER TH80 Pro, refer to the following common solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Kibor henteu ngaréspon (Kabel) | Loose cable connection, faulty USB port, keyboard off. | Ensure USB-C cable is securely connected. Try a different USB port or cable. Check if the power switch is ON. |
| Keyboard not responding (2.4GHz Wireless) | Receiver not connected, low battery, keyboard off, interference. | Ensure 2.4GHz receiver is plugged in. Charge the keyboard. Check if the power switch is ON. Move closer to the receiver or reduce interference. |
| Kibor teu ngaréspon (Bluetooth) | Not paired, low battery, out of range, incorrect channel selected. | Re-pair the keyboard (Fn+1/2/3). Charge the keyboard. Ensure device Bluetooth is on. Select the correct Bluetooth channel. |
| RGB backlighting not working | Lampu latar pareum, masalah parangkat lunak. | Press Fn + Backspace to toggle backlight. Check software settings. |
| Konci ngetik dua kali atanapi henteu kadaptar | Saklarna rusak, aya kokotor di handapeun tutup tombol. | Remove keycap and clean. Replace the faulty switch using the switch puller. |
7. Spésifikasi
Key technical specifications for the EPOMAKER TH80 Pro keyboard:
| Fitur | Rincian |
|---|---|
| Modél | TH80 Pro |
| Tata perenah | 75% Kompak |
| Konektipitas | Bluetooth 5.0, Nirkabel 2.4GHz, Kabel USB-C |
| Kapasitas batré | 4000 mah |
| Kancing konci | PBT, MDA Profile, Dye-sub Technique |
| Saklar | Hot-swappable (3/5-pin compatible) |
| Lampu tukang | RGB |
| OS cocog | Windows, Mac OS, PS5, PS4, Xbox, Android, iOS |
| Dimensi produk | 12.91 "L x 5.59" W x 1.57 "H (32.8cm x 14.2cm x 4cm) |
| Item Beurat | 2.99 pon (1.36 kg) |
8. Garansi jeung Rojongan
EPOMAKER products are covered by a limited warranty against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EPOMAKER website. If you require technical assistance or have questions not covered in this manual, please contact EPOMAKER customer support through their official websitus atanapi pangecér dimana anjeun mésér produk.
