1. Bubuka jeung Leuwihview
The Enthuze ENT-TD6000 is a versatile device designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank. It also includes integrated LED light functions for various situations.
fitur konci ngawengku:
- Inflatable Function: Capable of inflating car tires, motorcycle tires, bicycle tires, air mattresses, water toys, and sports balls.
- Car Jump Start: Designed to jump-start 12V vehicle batteries using the included cables.
- Mobile Power Supply: Can charge/power cell phones, tablets, game consoles, cameras, and other digital smart devices.
- Fungsi Lampu LED: Features multiple LED light modes for illumination and signaling.
Figure 1: Enthuze ENT-TD6000 Jump Starter and included accessories.
2. Setup jeung Pamakéan Awal
2.1 Ngecas Alat
Before first use, fully charge the Enthuze ENT-TD6000. Connect the device to a suitable power source using the provided USB-C cable. The display will indicate the charging status. A full charge typically takes approximately 3.5 hours.
2.2 Connecting Jump Start Cables
To prepare for jump-starting, ensure the jump starter is adequately charged. Connect the smart battery clamp to the jump starter's designated port. The device will indicate readiness.
Video 1: Demonstration of connecting the smart battery clamp and jump-starting a vehicle.
3. Parentah Operasi
3.1 Luncat Mimitian Kandaraan
- Pastikeun luncat starter geus dicas pinuh.
- Sambungkeun batré pinter clamp to the jump starter.
- Gantelkeun beureum (+) clamp ka terminal positif batré kendaraan.
- Gantelkeun hideung (-) clamp to the negative terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
- Press the switch button on the jump starter to activate the jump-start function.
- Mimitian mesin kendaraan.
- Sakali kendaraan dihurungkeun, langsung cabut konci naamps from the vehicle battery, then disconnect the smart battery clamp ti starter luncat.
This device is suitable for jump-starting vehicles with up to 8.0L gasoline engines and 6.0L diesel engines, including small cars, SUVs, pickup trucks, motorcycles, and boats.
3.2 Ngagunakeun Kompresor Udara
- Screw the air hose into the designated port on the jump starter.
- Connect the other end of the air hose to the tire valve or the item to be inflated.
- Use the '+' or '-' buttons to set the desired air pressure.
- Press and hold the switch button for 3 seconds to start the inflation process.
- The device will automatically stop when the set pressure is reached.
- Disconnect the air hose from the item and the jump starter.
3.3 Ngagunakeun salaku Power Bank
The Enthuze ENT-TD6000 features USB output ports to charge various electronic devices:
- USB Kaluaran 1: 5V=3A, 9V=2A, 12V=1.5A
- USB Kaluaran 2: 5V = 2.1A
Connect your device to the appropriate USB port using a compatible charging cable.
3.4 Fungsi Lampu LED
The device includes multiple LED light modes:
- Lampu Stabil: Pikeun katerangan umum.
- Modeu SOS: Pikeun sinyal darurat.
- Lampu Strobe: Pikeun narik perhatian.
Press the light button to cycle through the different modes.
4. Pangropéa
To ensure the longevity and optimal performance of your Enthuze ENT-TD6000, follow these maintenance guidelines:
- Ngecas Biasa: Cas deui alat unggal 3-6 bulan sakali, sanajan teu dianggo, pikeun ngajaga kasehatan batréna.
- Panyimpenan: Store the device in a cool, dry place. The recommended storage temperature should not be lower than -10°C or higher than 50°C. Extreme temperatures can shorten the product's life and damage the built-in battery.
- beberesih: Use a soft, dry cloth to clean the exterior of the device. Do not use harsh chemicals or abrasive materials.
- Pamariksaan kabel: Periodically inspect the jump start cables and air hose for any signs of wear, damage, or corrosion. Replace if necessary.
Figure 2: Product with accessories and important warnings.
5. Cara ngungkulan
Tingali tabel di handap pikeun masalah umum sareng solusina:
| Pesen Kasalahan | Cukang lantaranana | Solusi |
|---|---|---|
| ERROR | Jumper cables connected with reversed polarity to the car battery. | Sambungkeun batré clamps to the correct positive and negative terminals. |
| RENDAH | batré mobil disambungkeun leres, tapi batré voltage is below 9V, and the core temperature is above 0°C/32°F. | BOOST button for 2 seconds to use the forced boost function. |
| NGASING | High-temperature protection activated, displaying core temperature overheating. | The product activates temperature protection below 50°C/122°F and resumes output when the temperature drops to 45°C/113°F. |
| IN | Low-temperature protection activated. | The product activates temperature protection below -10°C/-4°F and resumes output at 0°C/32°F-37°F. |
| MULAI | Buzzer sounding, silence after 30 seconds. | Overcurrent detected, stop starting vehicle, disappear for 30S. |
| MULAI | Vehicle start detected more than 5 times within 10 minutes, buzzer sounds buzzer mutes after 30S "START" continues to flash. | Stop starting the vehicle and the safety mode disappears after 10 minutes. |
6. Spésifikasi
Detailed technical specifications for the Enthuze ENT-TD6000:
| Parameter | Nilai |
|---|---|
| Ngaran produk | Luncat Starter kalawan Air Compressor |
| Modél | ENT-TD6000 |
| Ukuran | 193 x 110 x 53 mm |
| Rentang Tekanan Inflasi | 0.2-8bar / 3-120psi |
| Suhu Operasi | Charge: 0°C~45°C, Discharge: -10°C~45°C |
| Suhu Panyimpenan | -10°C~50°C |
| Inflatable Hose Length | 435mm (including air nozzle) |
| Kapasitas batré | 41.44Wh (14.8V, 2.8Ah) |
| Gawé Noise | Kurang ti 80dB jauh ti 1 méter |
| Ngecas Input | 5V = 3A |
| Waktu Ngecas | Sakitar 3.5 jam |
| Kaluaran USB 1 | 5V=3A, 9V=2A, 12V=1.5A |
| Kaluaran USB 2 | 5V = 2.1A |
| Air Pressure Sensor Accuracy | ± 1 psi |
| Mimitian Mobil Voltage | 12V |
| Start Car Current | 500A (1000A Peak) |
Figure 3: Basic Parameters of the Enthuze ENT-TD6000.
7. Perhatosan Kaamanan Penting
- Do not overcharge the internal battery. Refer to the instruction manual for proper charging procedures.
- Do not smoke, strike a match, or cause a spark in the vicinity of the power pack during operation.
- Ngan ngeusi batre internal di wewengkon ventilasi alus.
- Turn off the 12V firing output when the remaining power of the device's battery cell is less than 20%. USB port can output normally.
- Résiko tatu pikeun jalma. Entong nganggo produk ieu upami kabel listrik atanapi kabel batré rusak ku cara naon waé.
- Alat ieu henteu dimaksudkeun pikeun dianggo dina fasilitas perbaikan komérsial.
- Alat ieu dimaksudkeun pikeun disimpen di jero rohangan nalika henteu dianggo. Alat ieu henteu kedah disimpen atanapi ditinggalkeun di luar nalika henteu dianggo.
- Alat ieu dimaksudkeun pikeun dianggo samentawis di luar sareng perawatan anu wajar kedah dilaksanakeun nalika nganggo alat ieu dina kaayaan baseuh.
8. Garansi jeung Rojongan
For warranty information or technical support, please contact Enthuze Automotive Products directly. Keep your purchase receipt as proof of purchase.
