WORKPRO 3.6V Jukut Tanpa Kabel sareng Manual Pamaké Shrub Shear

Bubuka

Thank you for choosing the WORKPRO 3.6V Cordless Grass and Shrub Shear. This versatile 2-in-1 tool is designed for efficient trimming of grass edges and small shrubs. It features a lightweight design, powerful motor, and a long-lasting battery for convenient outdoor use. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image: The WORKPRO 3.6V Cordless Grass and Shrub Shear, showing the main unit, the grass shear blade, the shrub shear blade, and the Type-C charging cable.

Émbaran Kasalametan

Salawasna merhatikeun pancegahan kaamanan dasar nalika nganggo alat listrik pikeun ngirangan résiko seuneu, kejutan listrik, sareng tatu pribadi.

• Baca Manual: Baca jeung ngarti sagala parentah saméméh operasi alat.
• Jaga Area Bersih: Jauhkeun barudak, jalma anu ningali, sareng piaraan ti daérah operasi.
• Maké Alat Pelindung: Always wear safety glasses, gloves, and appropriate footwear.
• Avoid Contact with Blades: Never touch the blades while the tool is running or connected to power.
• Pakem Aman: Salawasna tahan alat pageuh ku duanana leungeun salila operasi.
• Double Switch Safety: The tool features a double switch mechanism to prevent accidental activation. Ensure both switches are engaged for operation.
• Ngecas: Use only the provided Type-C charging cable and a compatible 5V/1A charger. Do not use the tool while charging.
• Panyimpenan: Simpen alat dina tempat anu garing, aman, jauh tina jangkauan barudak.

Image: Close-up of the ergonomic safety lock and ON/OFF switch, highlighting the dual activation mechanism for safe operation.

Eusi pakét

Pastikeun yén sadaya barang aya sareng dina kaayaan anu saé nalika ngabongkar:

• 1 x WORKPRO Grass and Shrub Shear Unit
• 1 x Grass Blade (75 mm wide)
• 1 x Shrub Blade (120 mm length)
• 1 x Kabel Ngecas Tipe-C
• 1 x Manual Pamaké

Produk Leuwihview

Familiarize yourself with the components of your WORKPRO shear:

Image: Diagram showing key components: Type-C Charging Port with Indicator, Type-C Cable (1M), Safety Lock-off Button, ON/OFF Switch, Blade Release Button, TPR Anti-Slip Handle, and Shrub Blade. The unit weighs approximately 370g.

• Unit Utama: Ergonomic body with integrated motor and battery.
• Grass Blade: Designed for trimming grass edges, 75mm cutting width.
• Shrub Blade: Designed for shaping shrubs and small branches, 120mm cutting length.
• Port Ngecas Tipe-C: Pikeun ngecas batré internal.
• Safety Lock-off Button: Nyegah ngamimitian teu kahaja.
• Hurungkeun ON / OFF: Activates the motor when the safety lock is disengaged.
• Tombol Leupaskeun Blade: Allows for quick and easy blade changes.
• TPR Anti-Slip Handle: Nyadiakeun cekelan nyaman jeung aman.

Disetél

Ngecas Batré

The tool is equipped with a 2000mAh Lithium-ion battery. Before first use, fully charge the battery.

1. Locate the Type-C charging port on the tool.
2. Connect the provided Type-C charging cable to the tool and to a 5V/1A USB power source (e.g., power bank, Type-C charger, car charger, laptop/PC USB port). Note: USB charging brick is not included.
3. Lampu indikator ngecas bakal hurung (biasana beureum) salami ngecas.
4. Once fully charged, the indicator light will change (typically green). Charging time is approximately 2-3 hours.
5. Pegatkeun sambungan carjer saatos ngeusi batre.

Image: Illustration of the WORKPRO shear being charged via a Type-C cable, showing compatible power sources like a power bank, Type-C charger, car charger, and laptop/PC. The charging indicator lights (red for charging, green for fully charged) are also depicted.

Masang / Ngarobah wilah

Ensure the tool is turned off and disconnected from any power source before changing blades.

1. Press the Blade Release Button located on the top of the tool.
2. Carefully remove the currently installed blade by pulling it away from the unit.
3. Align the desired blade (grass or shrub) with the slot on the tool.
4. Push the blade firmly into place until it clicks, indicating it is securely locked.
5. Verify the blade is securely attached by gently pulling on it.

Image: Diagram illustrating the dimensions of both the grass and shrub blades, and a close-up showing the easy and safe blade change mechanism with the blade release button.

Parentah Operasi

Always wear appropriate safety gear before operating the shear.

Ngamimitian sareng Ngeureunkeun Alat

1. Pastikeun bilah anu dipikahoyong parantos dipasang kalayan pageuh.
2. Tahan parabot pageuh.
3. To start, press and hold the Safety Lock-off Button with your thumb.
4. While holding the safety button, press the ON/OFF Switch with your index finger. The blades will begin to move.
5. To stop, release the ON/OFF Switch. The blades will stop.

Ngagunakeun Bilah Gunting Jukut

The grass shear blade is ideal for trimming grass edges around flowerbeds, pathways, and other areas inaccessible to larger mowers.

• Ensure the grass blade (75mm wide) is installed.
• Hold the tool with the blade parallel to the ground or at a slight angle for precise edging.
• Move the tool slowly and steadily along the grass edge.
• Avoid cutting wet grass, as it can clog the blades and reduce efficiency.

Image: Depicts the two cutting modes: Grass Shear with a maximum cutting width of 75mm, and Hedge Trimmer with a maximum cutting length of 118mm and maximum cutting thickness of 7.8mm.

Using the Shrub Shear Blade

The shrub shear blade is suitable for shaping and trimming small shrubs, hedges, and ornamental plants. It can cut branches up to 7.8mm in diameter.

• Ensure the shrub blade (120mm length) is installed.
• Hold the tool at a comfortable angle for trimming.
• Work in small sections, making smooth, even passes.
• Do not force the blades through thick branches. If resistance is met, reposition the tool or use a different cutting tool for larger branches.

Image: Collage showing the WORKPRO shear being used for various trimming tasks, including shaping small trees, weeding, and trimming potted plants, demonstrating its versatility.

Pangropéa

Pangropéa rutin ngajamin kinerja optimal sareng manjangkeun umur alat anjeun.

beberesih

• Always turn off the tool and remove the blade before cleaning.
• Use a soft brush or cloth to remove debris, sap, and dirt from the blades and housing.
• Do not use abrasive cleaners or solvents, as they can damage the plastic parts.
• Wipe the blades with a lightly oiled cloth to prevent rust.

Perawatan sabeulah

• The blades are made of premium 65Mn steel for high hardness and wear resistance.
• Inspect blades regularly for damage or dullness.
• If blades become dull, they can be sharpened by a professional or replaced.
• Store blades in a dry place to prevent corrosion.

Gambar: Deukeut view of the premium 65Mn steel blades, emphasizing their high hardness, wear resistance, sharpness, and long life.

Panyimpenan

• Simpen alat dina tempat anu tiis, garing, jauh tina sinar panonpoé langsung sareng Uap.
• Pastikeun batre tos dieusi sawaréh (sakitar 50%) sateuacan neundeun jangka panjang pikeun ngajaga kaséhatan batré.
• Jauhkeun tina jangkauan barudak sareng pangguna anu henteu sah.

Pamérésan masalah

spésifikasi

Image: Visual representation of the upgraded power motor (1100rpm) and the long-lasting 2000mAh Lithium-ion battery, indicating over 40 minutes of no-load operation time.

Garansi sareng Rojongan

For warranty information or technical support, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

Pabrikan: Hang Zhou Great Star Industrial Co., LTD

For further assistance, visit the WORKPRO official websitus atanapi ngahubungan layanan palanggan maranéhna.