Bubuka
This manual provides detailed instructions for the setup, operation, and maintenance of your Socket Mobile SocketScan S720 barcode scanner. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Image: The Socket Mobile SocketScan S720 barcode scanner, presented in a vibrant red finish, is shown securely seated in its black charging dock. The scanner features a comfortable ergonomic grip and visible scanning window.
Guide Setup
1. Unboxing sareng Biaya Awal
- Carefully remove the SocketScan S720 scanner and its accessories from the packaging.
- Connect the charging cable to the charging dock and then to a power source.
- Place the scanner into the charging dock. The LED indicator on the scanner will show charging status. Allow the scanner to fully charge before first use (approximately 4-6 hours).
2. Pairing with a Host Device (Bluetooth)
The SocketScan S720 uses Bluetooth for wireless communication. Follow these steps to pair it with your smartphone, tablet, or computer:
- Daya Hurung: Press and hold the small power button on the scanner until it powers on.
- Lebetkeun Mode Papasangan: Scan the appropriate Bluetooth pairing barcode from the Quick Start Guide or the Socket Mobile website. This will put the scanner into discoverable mode. The Bluetooth LED will flash rapidly.
- Enable Bluetooth on Host Device: On your host device (e.g., smartphone), go to the Bluetooth settings and ensure Bluetooth is enabled.
- Select Scanner: Milarian pikeun available devices. The SocketScan S720 should appear as "Socket S720 [XXXXXX]" (where XXXXXX is the last 6 digits of the Bluetooth address). Select it to pair.
- Konfirmasi pasangan: Once paired, the Bluetooth LED on the scanner will turn solid blue, indicating a successful connection.
Note: For specific operating systems (iOS, Android, Windows), refer to the Socket Mobile support website for detailed pairing instructions and application integration.
Parentah Operasi
1. Nyeken barkod
- Ensure the scanner is powered on and successfully paired with your host device.
- Arah jandela panyeken kana barkod anu anjeun hoyong scan.
- Press and hold the large scan button. A red aiming beam will appear.
- Center the aiming beam over the barcode. The scanner will emit a beep and the LED will flash green upon a successful scan.
- The scanned data will be transmitted to your host device as keyboard input.
2. Indikator LED
- LED Héjo: Successful scan.
- Blue LED (Solid): Bluetooth disambungkeun.
- Blue LED (Flashing): Bluetooth discoverable/pairing mode.
- Red LED (Solid): batré lemah.
- LED Beureum (Kedip-kedip): Kasalahan ngecas.
- Amber LED (Solid): Ngecas.
- Amber LED (Off when charging): Dicas pinuh.
Pangropéa
1. Ngabersihan Scanner
- Make kaen nu lemes, teu aya lint rada dampened with water or a mild cleaning solution to wipe the exterior of the scanner.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the device.
- Gently clean the scanning window with a soft cloth to ensure optimal scanning performance.
2. Kaperawatan batré
- Pikeun ngamaksimalkeun umur batre, ulah miceun batre sapinuhna.
- Simpen scanner di tempat anu tiis sareng garing upami henteu dianggo salami waktos anu lami.
- If the scanner will not be used for a long time, charge it to about 50% before storing.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Scanner teu hurung. | Batré béak. | Charge the scanner using the provided charging dock and cable. |
| Scanner does not pair via Bluetooth. | Scanner not in pairing mode; Bluetooth off on host device; interference. | Ensure scanner is in pairing mode (flashing blue LED). Verify Bluetooth is enabled on your host device. Move closer to the host device. |
| Scanner henteu maca barkod. | Barcode damaged; incorrect symbology enabled; dirty scanning window. | Try scanning a different barcode. Ensure the barcode is not damaged. Clean the scanning window. Check scanner configuration for enabled symbologies. |
| Data discan teu bener atawa teu lengkep. | Incorrect scanner configuration; host device input issues. | Reset scanner to factory defaults (scan specific barcode from manual). Ensure your host device's input method is correctly configured. |
spésifikasi
- model: SocketScan S720 (CX3987-3044)
- Konektipitas: Bluetooth
- Jenis Barcode: 1D/2D Linear Barcode
- Sumber Daya: Batré Powered (2 batré AA diperlukeun)
- Alat anu cocog: Desktop, Laptop, Smartphone
- Beurat barang: 1.51 pon
- Ukuran Paket: 10.71 x 8.66 x 7.13 inci
- Pabrikan: SOKET
- Titimangsa munggaran sadia: 25 Januari 2023
Émbaran jaminan
Socket Mobile products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Socket Mobile websitus atanapi kartu garansi anu kalebet sareng produk anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi.
Rojongan Palanggan
For technical assistance, product inquiries, or additional support, please visit the official Socket Mobile support website or contact their customer service department. Online resources often include FAQs, driver downloads, and advanced configuration guides.
Websitus: www.socketmobile.com/support
