SONICAKE Warped Dimension Modulation Guitar Effects Pedal User Manual

1. Bubuka

The SONICAKE Warped Dimension is a versatile modulation guitar effects pedal designed to offer a range of high-quality modulation effects. This pedal combines four classic modulation modes: Chorus, Flanger, Phaser, and Tremolo, providing diverse tonal options for any musical style. It features a dedicated Tap Tempo function for real-time rate control and a specially designed buffer bypass circuit to maintain signal integrity.

Figure 1: SONICAKE Warped Dimension Modulation Guitar Effects Pedal

2. Fitur konci

• 4-in-1 Modulation: Integrates Chorus, Flanger, Phaser, and Tremolo effects into a single pedal.
• Classic Tones: Reproduces legendary modulation effects.
• Ketok Tempo: Independent footswitch for real-time rate control.
• Panyangga Bypass: Maintains pristine sound quality when the effect is disengaged.
• Konstruksi awét: Housed in an aluminum-alloy casing for lightweight durability.

3. Kontrol jeung Fungsi

Gambar 2: Leuwihview of Pedal Controls

1. Mode Selector Knob: Rotates to select one of the four modulation effects: Chorus, Flanger, Phaser, or Tremolo.
2. Input DC 9V: Connects to a 9V DC center-negative power supply (not included).
3. Jack Input: 1/4-inch audio input for your guitar or other instrument.
4. Kenop Level: Adjusts the overall output volume of the effect.
5. Kenop Nada: Controls the tone or brightness of the modulated signal.
6. Kenop jero: Adjusts the intensity or depth of the selected modulation effect.
7. Rate Knob: Controls the speed of the selected modulation effect. This knob is overridden by the Tap Tempo function when active.
8. Jack kaluaran: 1/4-inch audio output to your amplifier or next pedal in the chain.
9. ON/OFF Footswitch: Engages or disengages the effect. The LED indicates the effect status (on/off).
10. TAP Footswitch: Used for Tap Tempo. Tap this footswitch two or more times to set the rate of the modulation effect. The LED will blink to indicate the set tempo.

4. Setélan

To set up your SONICAKE Warped Dimension pedal, follow these steps:

1. Sambungan Daya: Connect a standard 9V DC center-negative power supply (5.5x2.1mm connector) to the DC 9V input jack (2). Ensure the power supply meets the specified voltage sareng sarat polaritasna.
2. Sambungan Instrumen: Connect your guitar or other instrument to the Input Jack (3) using a standard 1/4-inch instrument cable.
3. Sambungan Kaluaran: Connect the Output Jack (8) to your amplifier atanapi pedal salajengna dina ranté sinyal anjeun nganggo kabel instrumen standar 1/4 inci.
4. Daya Hurung: Once all connections are secure, apply power to the pedal. The ON/OFF LED (9) will illuminate when the pedal is active.

Figure 3: DC 9V Center Negative Power Connection

5. Modeu Operasi

The pedal offers four distinct modulation modes, selectable via the Mode Selector Knob (1):

• Chorus: Produces a rich, shimmering effect by slightly detuning and delaying the original signal.
• Flanger: Creates a sweeping, jet-like sound by mixing a delayed, phase-shifted signal with the original.
• Fase: Generates a swirling, psychedelic effect by creating phase shifts in the signal.
• Tremolo: Modulates the volume of the signal, creating a pulsating effect.

Figure 4: Modulation Mode Selection

Ketok Tempo Function

The Tap Tempo function allows you to set the modulation rate in real-time:

1. Engage the desired modulation effect using the ON/OFF Footswitch (9).
2. Tap the TAP Footswitch (10) two or more times in rhythm with your desired tempo. The LED on the TAP footswitch will blink to indicate the set rate.
3. The Rate Knob (7) will be overridden by the Tap Tempo setting until the pedal is powered off or the rate is manually adjusted again.

Figure 5: Tap Tempo Footswitch

6. Pangropéa

To ensure the longevity and optimal performance of your pedal:

• Jaga pedal tetep bersih sareng bébas tina lebu. Anggo lawon anu lemes sareng garing pikeun ngabersihkeun.
• Ulah nepi ka pedal kakeunaan suhu anu ekstrim, kalembaban, atanapi sinar panonpoé langsung.
• Do not attempt to disassemble or repair the pedal yourself, as this may void the warranty.
• Always use the correct power supply (9V DC center-negative) to prevent damage.

7. Cara ngungkulan

• Henteu aya sora: Pariksa sadaya sambungan kabel (instrumen, amplifier, power). Ensure the power supply is correctly connected and functioning. Verify the pedal is engaged (LED on).
• Sora Lemah atanapi Distorsi: Check instrument and amplifier volume levels. Ensure the Level knob on the pedal is not set too low or too high. Test with different cables.
• Pangaruhna Henteu Ngahibur: Confirm the power supply is connected and providing power. Press the ON/OFF footswitch firmly.
• Modulation Rate Issues: If using Tap Tempo, ensure you have tapped the footswitch at least twice. If not using Tap Tempo, adjust the Rate knob (7).

8. Spésifikasi

• Jumlah modél: QDS
• Beurat barang: 12.7 ons (360 gram)
• Ukuran produk: 4.88 x 3.54 x 2.16 inci
• Tipe Panyambung: 5.5×2.1mm center negative power connector
• Antarmuka Hardware: Audio 1/4 inci
• Format Sinyal: Analog
• Sumber Daya: Kabel Listrik
• Voltage: 9 volt

9. Video produk

Watch these official product videos for demonstrations and further information:

10. Garansi jeung Rojongan

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official SONICAKE websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.