Bubuka
The HyperX Clutch Gladiate is a high-performance wired controller designed for use with Xbox One, Xbox Series X|S consoles, and PC. It features dual trigger locks, remappable rear buttons, and dual rumble motors to enhance your gaming experience. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your controller.
Gambar: Hareupeun view of the HyperX Clutch Gladiate Wired Controller, showcasing desain ergonomis na perenah tombol.
Disetél
Follow these steps to connect your HyperX Clutch Gladiate controller to your device.
- Buka bungkus Controller: Carefully remove the controller and its detachable USB-C cable from the packaging.
- Sambungkeun kabel: Selapkeun tungtung kabel USB-C kana port di luhur controller.
- Nyambung ka Alat:
- For Xbox One/Series X|S: Plug the USB-A end of the cable into an available USB port on your Xbox console. The controller should automatically be recognized.
- Pikeun PC: Plug the USB-A end of the cable into an available USB port on your PC. Windows will typically install the necessary drivers automatically.
- Pariksa sambungan: The Xbox button on the controller will illuminate, indicating a successful connection.
Image: The HyperX Clutch Gladiate controller positioned in front of an Xbox console, illustrating its official Xbox licensing and compatibility.
Image: The HyperX Clutch Gladiate controller shown with its durable, detachable USB-C cable, highlighting ease of storage and prevention of cable damage.
Parentah Operasi
Familiarize yourself with the key features and controls of your HyperX Clutch Gladiate controller.
Layout Controller
The controller features standard Xbox button layout including A, B, X, Y buttons, D-pad, left and right analog sticks, View, Menu, and Share buttons, along with left and right bumpers and triggers.
Gambar: Bagian hareup anu lengkep view of the HyperX Clutch Gladiate controller, showing the placement of all primary buttons and analog sticks.
Dual Trigger Locks
The dual trigger locks allow you to adjust the travel distance of the left and right triggers (LT/RT) for faster response times in games where quick trigger pulls are crucial, such as first-person shooters.
- Engage Short Pull: Move the physical switch on the underside of the controller to shorten the trigger travel. This is ideal for rapid firing.
- Disengage Full Pull: Move the switch back to allow full trigger travel, suitable for actions requiring precise pressure, like driving games.
Image: A close-up diagram illustrating the functionality of the dual trigger locks on the HyperX Clutch Gladiate, showing how to shorten trigger travel for faster actions.
Tombol Balik Programmable
The controller features two remappable buttons on the back, providing additional control options without removing your thumbs from the analog sticks.
- Pemrograman: Refer to the controller's specific programming instructions (usually a button combination or dedicated programming button) to assign functions like face buttons (A, B, X, Y), D-pad directions, or stick clicks (L3/R3) to these back buttons.
- Pamakéan: Once programmed, these buttons can be activated by your middle or ring fingers, allowing for quicker execution of complex maneuvers.
Image: A diagram highlighting the programmable back buttons on the HyperX Clutch Gladiate, showing various functions that can be reassigned to them.
Motor Rumble Ganda
Experience enhanced immersion with the powerful dual rumble motors, providing tactile feedback for in-game actions like explosions, impacts, and engine vibrations.
Image: The HyperX Clutch Gladiate controller depicted with motion blur, symbolizing the powerful dual rumble motors providing immersive feedback.
3.5mm Stereo Headset Port
Connect your favorite wired headset directly to the 3.5mm stereo jack on the controller for convenient audio and microphone access during gameplay.
Bagikeun Button
The dedicated Share button allows for quick capture and sharing of screenshots and video clips from your gameplay (functionality may vary slightly between Xbox and PC platforms).
Image: Hands holding the HyperX Clutch Gladiate controller, with callouts pointing to the Share Button and the 3.5mm Headphone Port, demonstrating comfortable grip.
Pangropéa
Proper care will extend the life of your HyperX Clutch Gladiate controller.
- beberesih: Paké kaen lemes, garing pikeun ngusap handap controller. Keur kokotor bandel, rada dampen lawon jeung cai. Hindarkeun bahan kimia anu kasar atanapi pembersih abrasive.
- Panyimpenan: When not in use, store the controller in a clean, dry place away from extreme temperatures and direct sunlight. The detachable cable allows for easier storage.
- Perawatan kabel: Avoid sharp bends or kinks in the USB-C cable. Always grasp the connector, not the cable, when plugging or unplugging.
- Hindarkeun tetes: Nangtayungan controller tina tetes jeung dampak, nu bisa ngaruksak komponén internal.
Pamérésan masalah
If you encounter issues with your HyperX Clutch Gladiate controller, try the following solutions.
| Masalah | Solusi anu mungkin |
|---|---|
| Controller not recognized by Xbox/PC. |
|
| Tombol atawa iteuk teu ngaréspon. |
|
| Rumble motors not working. |
|
| Masalah audio dina headset. |
|
spésifikasi
| Fitur | Rincian |
|---|---|
| merek | HyperX |
| Ngaran modél | clutch gladiate |
| Nomer Modél Item | 6L366AA |
| Alat nu cocog | Xbox Series X|S, PC, Xbox One |
| Tipe Controller | Gamepad |
| Téhnologi konektipitas | USB (Kabel) |
| Warna | Hideung |
| Item Beurat | 9.8 ons (kira-kira 277 gram) |
| Ukuran produk (L x W x H) | 6.1 x 4.35 x 2.54 inci (kira-kira 15.5 x 11.0 x 6.5 cm) |
| Sumber Daya | Kabel Listrik |
| Produsén | HP Nyarita. |
| Negara asal | Cina |
Garansi sareng Rojongan
For warranty information, technical support, or further assistance, please visit the official HyperX websitus atanapi ngahubungan layanan palanggan maranéhna. Simpen bukti pameseran anjeun pikeun klaim garansi.
Sumberdaya Online:
