Buku Panduan Kabinet Lantai Kamar Mandi Yaheetech

1. Bubuka

Thank you for choosing the Yaheetech Bathroom Floor Cabinet. This versatile storage unit is designed to enhance organization in your bathroom, living room, kitchen, or entryway. Featuring a large drawer, three small drawers, and a two-door cabinet with an adjustable shelf, it provides ample space for various items. This manual provides essential information for safe assembly, operation, and maintenance of your new cabinet.

Gambar 1.1: Hareupeun view of the Yaheetech Bathroom Floor Cabinet.

Image 1.2: The cabinet integrated into a living room environment, showcasing daya tarik estetika sareng fungsina.

2. Émbaran Kasalametan

Mangga baca sakabeh warnings kaamanan sarta parentah taliti saméméh assembly sarta pamakéan. Simpen manual ieu pikeun rujukan ka hareup.

• Do not exceed the maximum weight capacity for each shelf and drawer to ensure safety and prevent damage. The tabletop supports up to 20 kg (44.1 lb), the large drawer up to 8 kg (17.6 lb), small drawers up to 2.5 kg (5.5 lb) each, and each shelf up to 10 kg (22 lb).
• Always use the provided anti-toppling kits to secure the cabinet to a wall, especially if children or pets are present. This prevents accidental tipping and potential injury.
• Pasang kabinet dina permukaan anu lemes sareng bersih pikeun nyegah goresan.
• Pastikeun sadaya screws na fasteners aman tightened saméméh pamakéan. Périodik pariksa tur tighten deui sakumaha diperlukeun.
• Tetep bagian leutik jeung bahan bungkusan jauh ti barudak salila assembly.

Image 2.1: Illustration of the anti-toppling kits, showing how they secure the cabinet to the wall for enhanced stability and safety.

Gambar 2.2: A lengkep view of the anti-toppling kit components, essential for securing the cabinet.

3. Eusi Paket

Before beginning assembly, verify that all parts are present and undamaged. Refer to the included assembly diagram for a complete list of components and hardware.

Komponén Khas Ngawengku:

• Panel luhur
• Panel Samping (Kénca sareng Katuhu)
• Panel handap
• Panel Balik
• Large Drawer Components (Front, Sides, Back, Bottom)
• Small Drawer Components (Front, Sides, Back, Bottom)
• Panto Kabinet
• Rak adjustable
• Dibereskeun Rak
• Hardware Pack (Screws, Dowels, Hinges, Knobs, Magnetic Catches, Anti-toppling Kits)

4. Setup jeung Majelis

Assembly typically requires two people and approximately 1-2 hours. Follow the step-by-step diagrams provided in your package. A Phillips head screwdriver and a hammer (for dowels) are generally required.

Léngkah-léngkah Majelis:

1. Buka bungkus sareng Identipikasi Bagian: Lay out all components on a clean, soft surface. Match each part to the corresponding label in the assembly instructions.
2. Nyusun kerangka dasar: Connect the side panels to the bottom panel using the designated screws and dowels. Ensure all connections are snug.
3. Pasang Panel Balik: Slide the back panels into the grooves on the frame. Secure them using the provided small nails or screws.
4. Ngumpulkeun laci: For each drawer, attach the side and back panels to the front panel. Insert the bottom panel into the grooves. Secure with screws. Attach drawer pulls/knobs.
5. Install Drawer Slides/Tracks: Attach the plastic drawer tracks to the cabinet frame as indicated in the instructions.
6. Lebetkeun laci: Sacara ati-ati lebetkeun laci anu parantos dirakit kana kompartemenna masing-masing.
7. Install Fixed and Adjustable Shelves: Place the fixed shelf into its designated position. For the adjustable shelf, insert the shelf pins into the desired height holes and then place the shelf on top.
8. Pasangkeun Panto Kabinet: Secure the hinges to the cabinet doors and then attach the doors to the cabinet frame. Ensure the doors align properly and open/close smoothly. Install magnetic catches for secure closure.
9. Gantelkeun Panel Top: Pasangkeun panel luhur kana pigura anu parantos dirakit.
10. Install Anti-Toppling Kits: Attach the anti-toppling straps to the back of the cabinet and then secure them to a wall stud using appropriate wall anchors and screws.

Image 4.1: The cabinet structure showing the four corner braces, which provide additional stability during and after assembly.

Image 4.2: A close-up demonstrating the installation of a corner brace, highlighting the fixture for additional stability.

5. Parentah Operasi

Ngagunakeun Laci:

The cabinet features one large top drawer and three smaller vertical drawers. Pull the knobs or use the arch drawer opening to slide the drawers open. Push them back in until they are fully closed. Avoid forcing drawers if they feel stuck; check for obstructions.

Image 5.1: Detail of the arch drawer opening, designed for easy access to the small drawers.

Nyaluyukeun Rak:

The upper shelf behind the double doors is adjustable to three different heights (25.4 cm / 10″; 19 cm / 7.5″; 12.6 cm / 5″). To adjust, remove items from the shelf, lift the shelf, remove the shelf pins, reposition the pins into the desired holes, and then place the shelf back on the pins.

Image 5.2: The adjustable shelf feature, allowing for customized storage heights within the cabinet.

Image 5.3: A diagram illustrating the three adjustable height positions for the upper shelf.

6. Pangropéa

To keep your Yaheetech Bathroom Floor Cabinet in optimal condition, follow these simple maintenance guidelines:

• beberesih: The cabinet features a durable MDF construction with a spray-painted finish, making it water-resistant. To clean, simply wipe the surfaces with a dry or slightly damp lawon. Hindarkeun ngagunakeun bahan kimia anu kasar atanapi pembersih abrasive, anu tiasa ngarusak finish.
• Tumpahan: Promptly wipe up any spills to prevent water damage, especially in humid environments like bathrooms.
• Pariksa Hardware: Periodically check all screws, hinges, and drawer slides to ensure they are tight. Re-tighten if necessary to maintain stability and functionality.

Image 6.1: Demonstrating the water-resistant surface, which allows for easy cleaning of spills.

7. Cara ngungkulan

Upami anjeun mendakan masalah sareng kabinet anjeun, tingal masalah sareng solusi umum ieu:

• Cabinet is Wobbly/Unstable:
  • Ensure all screws and fasteners are fully tightened.
  • Verify that the cabinet is placed on a flat, level surface. Use shims if necessary to stabilize.
  • Confirm that the anti-toppling kits are securely installed to the wall.
• Laci Ulah Geser Lancar:
  • Check for any obstructions inside the drawer or on the tracks.
  • Ensure the drawer components are assembled correctly and are not misaligned.
  • Verify that the drawer tracks are securely attached to the cabinet frame.
• Panto-panto Teu Ditutup Bener:
  • Check the alignment of the hinges. Adjust if needed.
  • Pastikeun kait magnét dipasang kalayan leres sareng saluyu sareng panto.
  • Verify that the cabinet itself is level and square.
• Chemical Odor:
  • It is normal for new furniture to have a slight odor. Air out the room by opening windows and doors for a few days. The odor should dissipate over time.

8. Spésifikasi

Image 8.1: Comprehensive dimensions of the cabinet, including overall size and internal compartment measurements.

Image 8.2: A simplified diagram showing key dimensions for quick reference.

9. Garansi jeung Rojongan

For any questions regarding product warranty, missing parts, or assembly assistance, please contact Yaheetech customer support. Refer to your purchase documentation or the Yaheetech official websitus pikeun inpo kontak.