ELDOM Favourite 80L 2kW Horizontal Water Heater Instruction Manual

1. Bubuka sarta Émbaran Kasalametan

1.1 Produk Leuwihview

The ELDOM Favourite 80L 2kW Horizontal Water Heater, Model WH08046BR, is designed for efficient hot water supply in residential and commercial settings. This 80-liter electric water heater features a horizontal mounting design with water connections located at the bottom and controls on the right side. It incorporates a 33mm thick insulation layer for energy efficiency and a robust 6-fold protection system to ensure safe and reliable operation.

Gambar 1.1: Hareupeun view of the ELDOM Favourite 80L Horizontal Water Heater, showing the main body, temperature gauge, and control panel.

1.2 Parentah Kasalametan Penting

Mangga baca sadaya pitunjuk kalayan saksama sateuacan dipasang sareng dioperasikeun. Upami henteu nuturkeun pitunjuk ieu tiasa nyababkeun karusakan harta benda, cilaka pribadi, atanapi maot. Simpen manual ieu kanggo rujukan ka hareup.

• Personil anu mumpuni: Installation, maintenance, and repairs must be performed by qualified and authorized personnel only.
• Kasalametan listrik: Ensure the power supply matches the specifications (230V, 2kW). The appliance must be properly grounded. Do not operate with damaged cables or plugs.
• Tekanan cai: The maximum operating pressure is 7 bar. A pressure relief valve must be installed to prevent over-pressurization.
• Sambungan cai: All water connections must be watertight. Check for leaks after installation and during initial operation.
• Perlindungan overheat: The unit is equipped with overheat protection. Do not tamper kalawan alat kaamanan.
• Barudak sareng Jalma Rentan: Alat ieu henteu dimaksudkeun pikeun dianggo ku jalma (kaasup murangkalih) anu kakurangan kamampuan fisik, indrawi, atanapi mental, atanapi kirang pangalaman sareng pangaweruh, kecuali aranjeunna dipasihan pangawasan atanapi petunjuk ngeunaan panggunaan alat ku jalma anu tanggung jawab kasalametanana. .

2. Pamasangan

2.1 Milih Lokasi

The ELDOM Favourite water heater is designed for horizontal installation. Select a location that is:

• Structurally sound to support the weight of the full water heater (approx. 105 kg when full).
• Ditangtayungan tina hawa katirisan.
• Easily accessible for maintenance and service.
• Allows for proper drainage in case of leaks or safety valve discharge.

2.2 Mounting the Water Heater

The water heater must be securely mounted to a wall using the provided fixing brackets. Ensure the wall material is appropriate for heavy loads. The connections must be positioned at the bottom of the unit.

Gambar 2.1: Luhur view of the water heater showing the integrated mounting brackets for horizontal installation.

1. Mark the drilling points on the wall according to the dimensions of the mounting brackets.
2. Drill holes and insert appropriate wall anchors (fastening material not included).
3. Securely attach the fixing brackets to the wall.
4. Carefully lift and position the water heater onto the brackets, ensuring it is stable and level.

2.3 Panyambungan Plumbing

Connect the water heater to the domestic water supply. The water connections are 1/2 inch. The cold water inlet is typically marked blue, and the hot water outlet is marked red.

Gambar 2.2: Handap view of the water heater showing the cold (blue) and hot (red) water connections.

• Klep kaamanan: Install the included three-way safety valve (combination inlet valve) on the cold water inlet. This valve is crucial for preventing excessive pressure build-up.
• Drainase: Ensure the safety valve's discharge pipe is routed to an open drain, preventing water damage in case of activation.
• Keketatan: Use appropriate sealing materials (e.g., PTFE tape) on all threaded connections to ensure a watertight seal.

2.4 Sambungan Listrik

The water heater operates on 230V and has a power rating of 2kW. The electrical connection must be performed by a qualified electrician.

• Ensure the main power supply is switched off before making any electrical connections.
• Connect the water heater to a dedicated circuit with appropriate overcurrent protection (e.g., circuit breaker).
• Alatna kedah dibumikeun leres.
• Pastikeun sadaya sambungan aman sareng insulated.

3. Setup and Initial Start-up

1. Eusian tank: Before switching on the power, open a hot water tap in your home to allow air to escape from the water heater and pipes. Turn on the cold water supply to the water heater. Wait until water flows steadily from the hot water tap, indicating the tank is full. Close the hot water tap.
2. Pariksa bocor: Inspect all plumbing connections for any signs of leaks. Tighten connections if necessary.
3. Daya Hurung: Once the tank is full and leak-free, switch on the main power supply to the water heater.
4. Setel Suhu: Adjust the mechanical thermostat to your desired temperature. The illuminated on/off switch will indicate that the unit is powered and heating.
5. Pemanasan awal: Allow sufficient time for the water heater to heat the entire tank of water. This may take several hours for the first cycle.

4. Parentah Operasi

The ELDOM Favourite water heater is designed for straightforward operation.

Image 4.1: End view of the water heater showing the control panel with the thermostat dial and illuminated on/off switch.

• Saklar on/off: The illuminated switch on the control panel allows you to turn the heating element on or off. When illuminated, the unit is powered and will heat water according to the thermostat setting.
• Penyesuaian Suhu: Use the mechanical thermostat dial to set the desired water temperature. Turning the dial clockwise typically increases the temperature, while counter-clockwise decreases it.
• Suhu Témbong: A temperature gauge is located on the front of the unit, providing an indication of the current water temperature inside the tank.

5. Pangropéa

Pangropéa rutin ngajamin umur panjang sareng operasi efisien tina manaskeun cai anjeun.

• Inspeksi taunan: It is recommended to have the water heater inspected annually by a qualified technician.
• Pamariksaan Katup Kasalametan: Periodically check the pressure relief valve by lifting the test lever. Ensure water flows freely from the discharge pipe. If no water flows, the valve may be blocked and requires replacement.
• Turun: Over time, mineral deposits (limescale) can accumulate inside the tank and on the heating element, reducing efficiency. Descaling should be performed by a qualified technician as needed, depending on water hardness in your area.
• beberesih: Bersihkeun bagian luar pemanas cai nganggo sabun anu lemes,amp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Ngurangan Tangki: If the water heater will be out of use for an extended period or if there is a risk of freezing, the tank should be drained. Consult a qualified technician for proper draining procedures.

6. Cara ngungkulan

Sateuacan ngahubungan jasa, ulangview masalah umum sareng solusi ieu:

• Henteu Cai Panas:
  • Check if the power supply is on and the illuminated switch is lit.
  • Pariksa circuit breaker teu tripped.
  • Ensure the thermostat is set to a desired temperature.
  • The overheat protection may have activated. This requires a qualified technician to reset.
• Cai Panas Kurang:
  • The thermostat setting may be too low.
  • High hot water demand may exceed the unit's recovery rate.
  • Limescale buildup can reduce heating efficiency.
• bocor cai:
  • Check plumbing connections for tightness.
  • Water dripping from the safety valve is normal during heating cycles. If continuous, the valve may be faulty or water pressure too high.
  • Leaks from the tank itself indicate a serious issue and require immediate professional attention.
• Sora anu teu biasa:
  • Popping or rumbling noises can indicate sediment buildup in the tank.

For issues not resolved by these steps, contact a qualified service technician.

7. Spésifikasi

Image 7.1: Various symbols indicating product compliance (CE), temperature range, handling, and disposal information.

8. Garansi jeung Rojongan

8.1 Émbaran jaminan

This ELDOM Favourite water heater comes with a garansi 2 taun from the date of purchase. The warranty covers manufacturing defects under normal use and service. Please retain your proof of purchase for warranty claims.

Garansi henteu nutupan:

• Damage caused by improper installation or failure to follow instructions in this manual.
• Damage due to freezing, accidents, abuse, misuse, or alterations.
• Damage caused by operating the unit with an empty tank.
• Normal wear and tear, including limescale buildup.

8.2 Rojongan Palanggan

For technical assistance, warranty claims, or to locate authorized service personnel, please contact your retailer or the manufacturer's customer service department. Provide your product model number (WH08046BR) and date of purchase when contacting support.