OWON PC321-TY 3 Phase WiFi Smart Home Energy Monitor User Manual

Bubuka

This manual provides instructions for the installation, operation, and maintenance of your OWON PC321-TY 3 Phase WiFi Smart Home Energy Monitor. This device is designed to help you monitor your home's electricity consumption in real-time, offering insights into voltage, current, and power factor.

Émbaran Kasalametan penting

PERHATOSAN: Kakuatan clamp must be installed and serviced only by a qualified professional. Do not touch the terminals of the device during testing. Turn off all power supply to this equipment before installation to ensure safety.

Fitur produk

• Ngawas énergi: Real-time monitoring of power consumption, voltage, current, and power factor.
• Data Real-Time: Provides 2-second data updates with an accuracy of ±2% via a 2.4 GHz WiFi connection.
• Appliance Monitoring: Includes three 80A sensors for monitoring individual appliances like air conditioners, furnaces, water heaters, washers, and dryers.
• Integrasi Aplikasi SmartLife: Compatible with the 'SmartLife' application for convenient monitoring and control.
• Pamasangan Gampang: Lightweight design for straightforward installation by clamping onto power cables.

Setup sareng Instalasi

1. Unpacking jeung Inspection

Verify all components are present: OWON PC321-TY main unit, three 80A current sensors (clamps), and antenna.

2. Pamasangan Aplikasi

Download and install the 'SmartLife' application on your smartphone from your device's app store. Follow the in-app instructions to create an account and add your device.

3. Current Sensor (Clamp) Pamasangan

penting: Ensure the main power supply to the circuit you are monitoring is turned OFF before proceeding.

Connect the current sensors to the main unit. Attach the current clamps to the power cables of the circuits you wish to monitor. Ensure the arrow on each clamp points towards the load (P1→P2 or K→L) for correct current flow direction.

4. Diagram Kabel

Wiring Fase Tunggal

For single-phase systems, connect the main unit and clamps sakumaha ditémbongkeun dina diagram di handap.

3 Phase Wiring

For three-phase systems, ensure that each current transformer (CT) for L1, L2, and L3 corresponds to the respective phase of the circuit being measured.

5. Power On and WiFi Connection

Once all connections are secure and verified, restore power to the circuit. Follow the 'SmartLife' app instructions to connect the device to your 2.4 GHz WiFi network. An internet connection is required for real-time data monitoring.

Parentah Operasi

Monitoring Energy Data

Open the 'SmartLife' app on your smartphone. The app will display real-time energy consumption data, including total energy consumed, individual phase consumption, voltage, current, active power, and power factor. The app provides data updates every 2 seconds.

Data sajarah

The 'SmartLife' app allows you to view historical consumption records, enabling you to track energy usage over time (daily, monthly, yearly).

Pangropéa

The OWON PC321-TY is designed for low maintenance. Periodically check all wiring connections for security and ensure the device is free from dust and moisture. No user-serviceable parts are inside the main unit.

Pamérésan masalah

Alat Teu Nyambung ka WiFi

• Ensure your WiFi network is 2.4 GHz. The device does not support 5 GHz networks.
• Verify the WiFi signal strength at the installation location. If weak, consider relocating the device or using a WiFi extender.
• Confirm correct WiFi password entry in the 'SmartLife' app.
• Restart your WiFi router and the OWON device, then attempt to reconnect.

Bacaan teu akurat

• Check that the arrows on the current clamps are pointing in the correct direction (towards the load). Incorrect orientation will result in inaccurate readings.
• Pastikeun clamps are fully closed around the power cables.
• Verify that the correct CT (current transformer) is connected to the corresponding phase (L1, L2, L3) in a 3-phase setup.

Aplikasi Teu Nampilkeun Data

• Pariksa sambungan internét smartphone anjeun.
• Ensure the OWON device is connected to WiFi and has an active internet connection.
• Try closing and reopening the 'SmartLife' app.

Physical Damage to Antenna Cable

• Handle the antenna cable with care during installation to prevent damage. A damaged antenna cable can impair WiFi connectivity.

spésifikasi

Garansi sareng Rojongan

For warranty information and technical support, please refer to the OWON official websitus atanapi ngahubungan layanan palanggan maranéhna. Simpen resi pameseran anjeun pikeun klaim jaminan.