Buku Panduan Pangguna LANCOM R&S Unified Firewall UF-60 LTE

1. Bubuka

This manual provides essential information for the installation, operation, and maintenance of your LANCOM R&S Unified Firewall UF-60 LTE. Please read this manual thoroughly before using the device to ensure proper setup and functionality. Retain this document for future reference.

2. Émbaran Kasalametan

Observe the following safety precautions to prevent damage to the device or injury to personnel:

• Pastikeun alat disimpen dina permukaan anu stabil sareng rata.
• Ulah ngalaan alat ka beueus, suhu ekstrim, atawa sinar panonpoé langsung.
• Paké ngan adaptor kakuatan disadiakeun kalawan alat.
• Ulah muka alat casing. Rujuk sadayana jasa ka tanaga anu mumpuni.
• Tetep bukaan ventilasi jelas pikeun nyegah overheating.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

• LANCOM R&S Unified Firewall UF-60 LTE device
• Adaptor kakuatan
• Two LTE Antennas
• Kabel Ethernet
• Gancang Mimitian Guide

4. Alat Leuwihview

Familiarize yourself with the physical components and indicators of the UF-60 LTE firewall.

Figure 4.1: Front Panel of LANCOM UF-60 LTE
This image displays the front panel of the LANCOM UF-60 LTE Unified Firewall. The device is white with two black external antennas connected at the rear, extending upwards. On the left side of the front panel, the 'LANCOM Systems' and 'ROHDE & SCHWARZ' logos are visible. On the right side, a series of LED indicators are present. These indicators include four for Ethernet ports (labeled ETH0, ETH1, ETH2, ETH3) and additional status indicators for LTE signal, Wi-Fi, and general system status.

4.1. Indikator Panel Hareup

• ETH0-ETH3 LEDs: Sebutkeun aktivitas sareng status tautan pikeun masing-masing port Ethernet.
• LTE LED: Shows the status of the LTE connection (e.g., signal strength, connection active).
• Status Sistim LED: Indicates the overall operational status of the device.

4.2. Rear Panel Ports (Typical Configuration)

• Input kakuatan: Nyambung ka adaptor kakuatan nu disadiakeun.
• Port Ethernet (ETH0-ETH3): For connecting to your network devices (LAN) and WAN.
• Konektor Antena LTE: For attaching the external LTE antennas.
• Slot Kartu SIM: For inserting a SIM card for LTE connectivity.
• Tombol Reset: Dipaké pikeun mulangkeun setélan standar pabrik.

5. Setélan

5.1. Instalasi Hardware

1. Pasang Antenna: Screw the two LTE antennas onto the connectors at the rear of the device.
2. Selapkeun Kartu SIM: Open the SIM card slot cover and insert a valid SIM card. Ensure correct orientation.
3. Sambungkeun kabel jaringan:
   • Connect your internet source (e.g., modem) to the designated WAN Ethernet port (typically ETH0).
   • Connect your local network devices (e.g., computer, switch) to the LAN Ethernet ports (ETH1-ETH3).
4. Sambungkeun Kakuatan: Plug the power adapter into the device's power input and then into an electrical outlet. The device will power on automatically.

5.2. Aksés Konfigurasi Awal

After powering on, wait for the system status LED to indicate readiness (refer to the Quick Start Guide for specific LED patterns).

1. Ensure your computer is connected to one of the LAN ports (ETH1-ETH3) of the firewall.
2. Buka a web browser sareng lebetkeun alamat IP standar (contona, http://192.168.1.1) or the hostname of the device.
3. Follow the on-screen instructions to complete the initial setup wizard, which typically includes setting up administrator credentials, network settings, and basic firewall rules.

6. Ngoperasikeun Alat

The LANCOM R&S Unified Firewall UF-60 LTE operates primarily through its web-based management interface. This interface allows for comprehensive configuration and monitoring.

6.1. Ngaksés Antarmuka Manajemén

To access the management interface:

1. Ensure your computer is connected to the firewall's network.
2. Buka a web browser and navigate to the device's IP address or hostname.
3. Lebetkeun nami pangguna sareng kecap akses administrator anjeun.

6.2. Key Features and Configuration Areas

• Konfigurasi jaringan: Manage WAN (LTE, Ethernet), LAN, VLANs, and routing.
• Aturan firewall: Define security policies, access control lists, and intrusion prevention.
• VPN: Configure Virtual Private Network connections for secure remote access or site-to-site links.
• LTE Management: Monitor LTE signal strength, data usage, and connection status.
• Setélan Sistim: Manage user accounts, firmware updates, backups, and logging.

7. Pangropéa

7.1. Apdet firmware

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates are typically performed via the web management interface under the 'System' or 'Maintenance' section. Always back up your configuration before performing a firmware update.

7.2. beberesih

Clean the device periodically with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

7.3. Configuration Backup

It is recommended to regularly back up your device configuration. This allows for quick restoration of settings in case of an issue or when migrating to a new device.

8. Cara ngungkulan

Bagian ieu ngabahas masalah umum anu anjeun tingali.

• Henteu aya kakuatan:

  Ensure the power adapter is securely connected to both the device and a working electrical outlet. Verify the power outlet is functional.

• No Internet Connection (Ethernet WAN):

  Check the Ethernet cable connection between the firewall's WAN port and your modem/internet source. Verify that your modem is operational and receiving an internet signal. Check WAN configuration in the management interface.

• No Internet Connection (LTE):

  Ensure the SIM card is correctly inserted and active. Check LTE antenna connections. Verify LTE signal strength and connection status in the management interface. Contact your mobile network provider if the SIM card or service is suspected to be the issue.
• Teu Bisa Ngaksés Antarmuka Manajemén:

  Verify your computer is connected to a LAN port of the firewall. Ensure your computer's IP settings are set to obtain an IP address automatically (DHCP). Try clearing your browser's cache or using a different browser. If the IP address was changed, use the new address. If all else fails, a factory reset might be necessary (refer to the Quick Start Guide for reset procedure).

9. Spésifikasi Téknis

Note: Specifications are subject to change without notice. For the most current information, please refer to the manufacturer's official website. The "Connectivity Technology: HDMI" might be a misclassification in the source data, as firewalls typically use Ethernet for primary network connectivity.

10. Garansi jeung Rojongan

10.1. Émbaran jaminan

The LANCOM R&S Unified Firewall UF-60 LTE comes with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are provided by Lancom Systems. Please refer to the warranty card included with your product or visit the official Lancom Systems websitus pikeun inpo wincik.

10.2. Rojongan Téknis

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official support portal of Lancom Systems. You may also find FAQs and additional resources there to help resolve common issues.

Produsén Websitus: www.lancom-systems.com