Buku Panduan Pangguna Alat Cukur Listrik Timco RSM-1310 anu Bisa Dicas Ulang

Bubuka

This manual provides detailed instructions for the safe and effective use of your Timco RSM-1310 Rechargeable Electric Shaver. Please read this manual thoroughly before first use and keep it for future reference.

Émbaran Kasalametan

It is important to follow all safety precautions to prevent injury or damage to the device.

• Keep the shaver in a cool, dry place.
• This appliance is designed for dry use only. Do not use it in the shower or with water.
• Jauhkeun tina jangkauan barudak.
• Ulah ngabongkar atanapi nyobian ngalereskeun alat cukur nyalira. Hubungi tanaga anu mumpuni pikeun diservis.
• Pastikeun kabel ngecas henteu ruksak sateuacan dianggo.

Eusi pakét

Pastikeun yén sadaya item aya dina bungkusan:

• 1 x Timco RSM-1310 Electric Shaver
• 1 x Kabel Ngecas
• 1 x Sikat Pembersih
• 1 x Extra Set of Blades
• 1 x Cap Pelindung

Image: Included accessories for the Timco RSM-1310 electric shaver, featuring the charging cable, cleaning brush, and a protective cap for the shaver head.

Setup sareng Ngecas Awal

Before using your shaver for the first time, it requires an initial charge.

1. Connect the charging cable to the shaver and then to a power outlet.
2. Pikeun first charge, allow the shaver to charge for 12 jam.
3. Subsequent charges will require approximately 8 jam.
4. Ensure the shaver is turned off during charging.

Gambar: Hareupeun view of the Timco RSM-1310 electric shaver, highlighting the power button and the blue charging indicator light at the bottom.

Parentah Operasi

Nyukur

The Timco RSM-1310 is designed for dry shaving. Its dual linear floating stainless steel blades adapt to facial contours for a close shave.

1. Pastikeun beungeut anjeun beresih jeung garing saméméh cukur.
2. Pencét tombol daya pikeun ngaktipkeun cukur.
3. Hold the shaver at a right angle to your skin and move it against the direction of hair growth.
4. Stretch your skin with your free hand to ensure a smooth surface for the shaver.
5. Apply gentle pressure; do not press too hard.
6. Saatos cukur, pencét tombol daya pikeun mareuman cukur.

Gambar: Angled view of the Timco RSM-1310 electric shaver, clearly displaying its dual foil shaving head designed for efficient hair removal.

Using the Pop-Up Trimmer

The integrated pop-up trimmer is ideal for shaping sideburns, mustaches, and beards.

1. Panggihan tombol pelepas trimmer di tukang alat cukur.
2. Slide the button upwards to deploy the pop-up trimmer.
3. Hurungkeun cukur.
4. Carefully trim desired areas.
5. After use, turn off the shaver and push the trimmer back into its housing until it clicks into place.

Gambar: Sisi view of the Timco RSM-1310 electric shaver with its pop-up trimmer extended, ready for precision grooming.

Ngecas Alat Cukur

To maintain optimal performance, charge your shaver when the battery indicator shows low power.

• A full charge provides approximately 45 minutes of usage time.
• Regular charging time is 8 hours.
• Ulah overcharge batré.
• Disconnect the shaver from the power outlet once fully charged.

Pangropéa

Ngabersihkeun Alat Cukur

Regular cleaning ensures hygiene and extends the life of your shaver.

1. Turn off and unplug the shaver before cleaning.
2. Leupaskeun assembly sirah cukur.
3. Use the provided cleaning brush to remove hair clippings from the foils and cutter block.
4. Do not use water to clean the shaver head or body, as it is designed for dry use only.
5. Reattach the shaving head assembly securely.

Gambar: Deukeut view of the Timco RSM-1310 shaver head, detailing the dual foil system and the underlying cutters, ready for cleaning.

Ngaganti Blades

For optimal shaving performance, it is recommended to replace the blades and foils periodically. An extra set of blades is included with your shaver.

1. Ensure the shaver is turned off and unplugged.
2. Carefully remove the old shaving head and blades.
3. Install the new set of blades and foils, ensuring they are securely seated.
4. Miceun bilah heubeul kalawan tanggung jawab.

Pamérésan masalah

If you encounter issues with your Timco RSM-1310 shaver, refer to the following common solutions:

• Alat cukur henteu hurung: Ensure the shaver is fully charged. Check the charging cable connection.
• Kinerja cukur anu goréng: The blades may be dull. Replace the blades and foils. Ensure the shaver head is clean and free of hair clippings.
• Alat cukur eureun nalika dianggo: The battery may be depleted. Recharge the shaver for 8 hours.
• Sora anu teu biasa: Clean the shaver head thoroughly. Ensure all parts are correctly assembled.

spésifikasi

Garansi sareng Rojongan

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Timco websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.

Pikeun pitulung salajengna, anjeun tiasa nganjang ka Timco Brand Store on Amazon.