Flexson FLXE100WM1021

Flexson Wall Mount for SONOS ERA100 - Black (Single) Instruction Manual

Model: FLXE100WM1021

Bubuka

This manual provides comprehensive instructions for the safe and proper installation and use of your Flexson Wall Mount for SONOS ERA100. Please read all instructions carefully before beginning installation.

The Flexson Wall Mount is designed to securely hold your SONOS ERA100 speaker, allowing for optimal sound positioning with its unique tilting mechanism and 80-degree swivel capability. It is constructed from durable alloy steel with a powder-coated finish.

Eusi pakét

Sateuacan masang, pariksa yén sadaya komponén aya:

  • 1 x Flexson Wall Mount
  • Instruksi Manual
  • Fixings (screws, wall plugs)
  • Corner Adapter (optional use)
Ngabeledug view of Flexson Wall Mount components

Gambar 1: Ngabeledug view of the Flexson Wall Mount for SONOS ERA100, showing all included components and fixings for assembly.

Émbaran Kasalametan

  • Ensure the mounting surface can support the combined weight of the mount and the SONOS ERA100 speaker.
  • Anggo alat anu pas sareng alat kaamanan nalika instalasi.
  • If unsure about installation, consult a qualified professional.
  • Tetep bagian leutik jauh ti barudak.

Setup sareng Instalasi

Follow these steps for proper installation of your Flexson Wall Mount:

  1. Pilih Lokasi: Select a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing.
  2. Tanda titik pangeboran: Hold the wall bracket against the wall at the desired height and use a pencil to mark the drilling points.
  3. liang bor: Drill pilot holes at the marked points. The size of the drill bit will depend on the type of wall and the provided wall plugs.
  4. Selapkeun colokan témbok: Selapkeun colokan témbok anu cocog kana liang anu parantos dibor.
  5. Attach Wall Bracket: Secure the wall bracket to the wall using the provided screws. Ensure it is firmly attached.
  6. Assemble Speaker Cradle: Attach the speaker cradle components as per the diagram, ensuring all screws are tightened.
  7. Pasang Spiker: Carefully place your SONOS ERA100 speaker into the assembled cradle. The mount can be inverted to hold the speaker upside down if desired.
  8. Attach Speaker to Wall Bracket: Secure the speaker cradle with the speaker to the wall bracket. Ensure the locking mechanism is engaged.
  9. Saluyukeun Posisi: Adjust the speaker's tilt (up to 20 degrees down) and swivel (80 degrees) to achieve the desired sound direction.
Flexson Wall Mount with Sonos ERA100 speaker, front view

Gambar 2: Hareupeun view of the Flexson Wall Mount securely holding a SONOS ERA100 speaker, demonstrating its discreet design.

Flexson Wall Mount with Sonos ERA100 speaker, side view

Gambar 3: Samping view of the mounted SONOS ERA100 speaker, highlighting the compact profile of the Flexson Wall Mount.

Flexson Wall Mount with Sonos ERA100 speaker, angled view

Gambar 4: Angled view of the SONOS ERA100 speaker on the Flexson Wall Mount, showcasing its integration with the speaker's design.

Parentah Operasi

Once installed, the Flexson Wall Mount allows for flexible positioning of your SONOS ERA100 speaker.

  • Ngadengdekkeun: The mount features a unique tilting mechanism. Gently adjust the speaker to tilt it downwards by up to 20 degrees to direct sound.
  • Swiveling: The mount allows for an 80-degree swivel (40 degrees left and 40 degrees right) to optimize sound direction. Carefully rotate the speaker to the desired angle.
  • Pamasangan Inverted: The design allows the speaker to be mounted upside down if required for specific aesthetic or acoustic needs.
Sisi deukeut view of Flexson Wall Mount with Sonos ERA100 speaker

Gambar 5: Sisi deukeut view illustrating the secure attachment and potential for adjustment of the SONOS ERA100 speaker on the Flexson Wall Mount.

Pangropéa

The Flexson Wall Mount requires minimal maintenance.

  • beberesih: Lap dudukan ku lawon anu lemes sareng garing pikeun miceun lebu. Hindarkeun pembersih atanapi pangleyur anu abrasif.
  • Pariksa périodik: Periodically check all screws and fixings to ensure they remain tight and secure.

Pamérésan masalah

MasalahMungkin Cukang lantarananaSolusi
Mount feels loose on wallScrews or wall plugs not properly secured.Tighten all wall mounting screws. Ensure correct wall plugs were used for your wall type.
Speaker not stable in cradleCradle components not fully assembled or tightened.Check all screws securing the speaker cradle. Ensure the speaker is correctly seated.
Difficulty adjusting tilt/swivelAdjustment mechanism is too tight.Do not force. Check the manual for specific adjustment points and loosen slightly if necessary.

spésifikasi

Nomer modélFLXE100WM1021
merekFlexson
Spéker anu cocogSONOS ERA100
BahanAlloy Steel
WarnaHideung
Tipe rengseDilapis bubuk
Dimensi produk6.93 x 4.72 x 6.02 inci (17.6 x 12 x 15.3 cm)
Item Beurat14.4 ons (0.41 kg)
Kapasitas beban14.2 Pon (6.44 kg)
Adjustment DengdekkeunUp to 20 degrees downwards
Pangaturan Swivel80 degrees (40 degrees left, 40 degrees right)

Garansi sareng Rojongan

For warranty information and technical support, please refer to the official Flexson websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Simpen resi pameseran anjeun salaku bukti pameseran.

Pabrikan: Flexson

Websitus: Visit the Flexson Store on Amazon (kanggo inpormasi umum ngeunaan merek)

Dokumén Patali - FLXE100WM1021

Praview Flexson P5-WMV Vertical Wall Mount for Sonos PLAY:5 / Five - Installation Guide
Official installation guide for the Flexson P5-WMV vertical wall mount, designed for Sonos PLAY:5 and Sonos Five speakers. Includes safety warnings, parts list, and step-by-step assembly instructions for secure wall mounting.
Praview Flexson E300WM Wall Mount for SONOS ERA 300 - Installation Guide
Detailed installation guide for the Flexson E300WM wall mount, designed for the SONOS ERA 300 speaker. Includes safety warnings, required hardware, and step-by-step instructions for mounting on brick, masonry, or wood studwork.
Praview Flexson E100WM Wall Mount Installation Guide for Sonos Era 100
Detailed instructions for installing the Flexson E100WM wall mount for the Sonos Era 100 speaker, covering both masonry and wood stud installations.
Praview Flexson S1-CM Ceiling Mount for Sonos One, One SL, Play:1 - Product Overview jeung Spésifikasi
Detailed information on the Flexson S1-CM Ceiling Mount for Sonos One, One SL, and Play:1 speakers. Features include high-grade steel construction, adjustable tilt and swivel, and integrated cable management. Available in white and black.
Praview Flexson SAR-WM Wall Mount for Sonos Arc - Secure TV Soundbar Mounting
Discover the Flexson SAR-WM Wall Mount, designed to securely position your Sonos Arc soundbar 30mm in front of your TV for an immersive audio experience. Precision engineered in the UK, it offers easy installation and optimal sound performance.
Praview Flexson ERA300-CM Ceiling Mount for Sonos ERA 300 - Secure Speaker Mounting
Discover the Flexson ERA300-CM Ceiling Mount, designed to securely hang your Sonos ERA 300 speaker. Features adjustable tilt and swivel for optimal sound positioning, with integrated cable management. Ideal for home and commercial use.