LEDONE 8FT LED Vapor Tight Light Instruction Manual

1. Bubuka

This manual provides detailed instructions for the safe installation, operation, and maintenance of your LEDONE 8FT LED Vapor Tight Light. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for demanding environments requiring high resistance to water, dust, and corrosion, such as parking garages, car washes, cold storage, and industrial facilities.

2. Émbaran Kasalametan

WARNING: Risk of electric shock. Disconnect power before installation or servicing.

• Installation must be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and local codes.
• Mastikeun suplai voltage is compatible with the fixture's requirements (120-277Vac).
• Do not handle energized fixtures with wet hands or while standing on wet or damp surfaces.
• Ulah nyobian ngarobah atawa ngabongkar fixture nu. Henteu aya bagian anu tiasa dilayanan ku pangguna di jero.
• Anggo alat pelindung pribadi (PPE) anu pas nalika dipasang.
• Pastikeun alatna dipasang pageuh supados teu murag.

3. Eusi Paket

Pastikeun yén sadaya komponén aya sareng henteu ruksak sateuacan neraskeun pamasangan.

• LEDONE 8FT LED Vapor Tight Light Fixture
• Parabot Pemasangan (klip, sekrup, jangkar)
• Manual Pitunjuk (dokumén ieu)

4. Setup jeung Instalasi

4.1. Pra-Pamasangan

1. Pareuman kakuatan: Locate the circuit breaker or fuse box and turn off the power supply to the installation area. Verify power is off using a voltage panguji.
2. Ngabongkar: Carefully remove the fixture from its packaging. Inspect for any shipping damage.
3. Pilih Wattage and Color Temperature (CCT): Before mounting, adjust the wattage and CCT switches located on the fixture. These switches allow you to select between 60W, 80W, or 100W and 3500K, 4000K, or 5000K. Make your selection based on your lighting requirements.

Image: Product dimensions and location of wattage/CCT selection switches.

4.2. Pamasangan Fixture

The fixture is designed for surface mounting. Use the provided mounting clips and hardware.

1. Mark the desired mounting locations on the ceiling or wall. Ensure the marks are level and spaced appropriately for the fixture's length.
2. Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or masonry.
3. Secure the mounting clips to the surface using the provided screws.
4. Snap the LED vapor tight fixture into the mounted clips, ensuring it is firmly seated.

Gambar: Example of surface mounting in a facility.

Image: Detail of the linkable design feature.

4.3. Kabel Listrik

This fixture supports 0-10V dimming. Follow the wiring diagram below and local electrical codes.

• Nyambungkeun Hideung kawat ti fixture kana Jalur (L) wire from the power supply.
• Nyambungkeun Bodas kawat ti fixture kana nétral (N) wire from the power supply.
• Nyambungkeun Héjo kawat ti fixture kana Taneuh (GND) wire from the power supply.
• For 0-10V dimming: Connect the Ungu kawat ti fixture kana Taram + wire from the 0-10V dimmer. Connect the Pink / kulawu kawat ti fixture kana Taram- wire from the 0-10V dimmer.
• Ensure all connections are secure using appropriate wire connectors.

Note: If 0-10V dimming is not used, cap the purple and pink/gray wires individually with wire nuts.

5. Parentah Operasi

1. Daya Hurung: Once installation and wiring are complete, restore power to the circuit at the breaker or fuse box. The fixture should illuminate.
2. Dimming: If connected to a compatible 0-10V dimmer, adjust the dimmer control to achieve the desired light output level.
3. Wattage and CCT Adjustment: Wattage and CCT are set via internal switches during installation. These are not typically adjusted during normal operation. If changes are needed, disconnect power before accessing the switches.

6. Pangropéa

The LEDONE Vapor Tight Light is designed for long-term, low-maintenance operation. Regular cleaning can help maintain optimal light output.

• beberesih: Pegatkeun sambungan kakuatan saméméh beberesih. Ngagunakeun lemes, damp cloth with a mild, non-abrasive cleaner to wipe the exterior of the fixture. Do not use harsh chemicals or abrasive pads, as these can damage the finish or lens.
• Pamariksaan: Periodically inspect the fixture and mounting hardware for any signs of damage, loose connections, or wear. Address any issues promptly.
• Henteu aya Bagian anu Bisa Dilayanan Pamaké: The LED light source and driver are integrated components. Do not attempt to open or repair the fixture. Contact qualified personnel for any issues beyond basic cleaning and inspection.

Image: The IP65 waterproof rating ensures durability in wet conditions.

7. Cara ngungkulan

Before performing any troubleshooting, ensure power is disconnected at the circuit breaker.

8. Spésifikasi

Image: Key features and certifications of the LEDONE Vapor Tight Light.

9. Émbaran jaminan

LEDONE products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty. Please refer to the product packaging or the official LEDONE websitus kanggo syarat sareng katangtuan garansi khusus. Simpen bukti pameseran anjeun kanggo klaim garansi.

10. Rojongan Palanggan

If you have any questions, require technical assistance, or need to report an issue, please contact LEDONE customer support:

• Websitus: Visit the LEDONE Store on Amazon (for general inquiries)
• Surélék: Tingali kana bungkusan produk atanapi resmi website for direct support email.
• Telepon: Tingali kana bungkusan produk atanapi resmi website for direct support phone number.

Please have your product model number (8FT LED Vapor Tight Light) and proof of purchase ready when contacting support.