1. Émbaran Kasalametan penting
Mangga baca sagala parentah taliti saméméh assembly sarta pamakéan. Simpen manual ieu pikeun rujukan ka hareup.
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or damaged.
- Pasang korsi dina permukaan anu lemes sareng bersih pikeun nyegah goresan.
- Ulah overighten screws salila assembly.
- Do not stand on the chair. Use only for sitting.
- Ulah ngaleuwihan kapasitas beban maksimum 136 kg (300 lbs).
- Jauhkeun barudak tina bagian anu ngagerakkeun salami operasi.
- Regularly check all bolts and screws to ensure they are tight.
2. Setup jeung Majelis
The Yaheetech YAexj20001 office chair requires assembly. An accessory set with all necessary tools and hardware is included.
2.1 Ngabongkar bungkusan
Carefully remove all components from the packaging. Lay them out on a clean, soft surface to identify each part.
2.2 Idéntifikasi komponén
Refer to the diagram below to identify all parts before beginning assembly.
Gambar: Ngabeledug view showing all individual components of the Yaheetech office chair, including the base, casters, gas lift, seat, backrest, and armrests.
2.3 Léngkah Majelis
Follow the step-by-step instructions provided in the included accessory set. Typically, assembly involves:
- Attaching the casters to the chair base.
- Inserting the gas lift into the chair base.
- Attaching the armrests to the seat.
- Attaching the backrest to the seat and armrests.
- Mounting the assembled seat and backrest onto the gas lift.
3. Parentah Operasi
The Yaheetech YAexj20001 office chair offers several adjustable features for personalized comfort.
3.1 Korsi Jangkungna adjustment
To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. Release the lever at the desired height to lock it in place. The seat height can be adjusted between 48 cm and 58 cm.
3.2 Fungsi Goyang
The chair features a rocking function for relaxation. To activate the rocking function, pull the lever on the left side, beneath the seat, outwards. To lock the chair in an upright position, push the lever inwards. The rocking tension can be adjusted by turning the round knob located at the front, under the seat.
Gambar: Illustration demonstrating the chair's rocking function, showing the range of motion from 90 to 125 degrees, along with the tilt lock lever and tension adjustment knob.
3.3 Ergonomic Backrest and Padded Seat
The chair is designed with an S-shaped high back to conform to the natural curvature of the spine, providing support for the upper back, neck, and lumbar region. The seat is generously padded with high-density foam for comfort during extended use.
Gambar: Diagram illustrating the ergonomic design of the chair's backrest, highlighting support for the neck, back, and lumbar area.
Gambar: Pahareup-hareup view of the chair's seat and armrests, detailing the high-density foam padding and breathable faux leather for ultimate comfort.
4. Perawatan sareng Pangropéa
Proper care will extend the life and appearance of your Yaheetech office chair.
- beberesih: The faux leather upholstery is water and stain resistant. Wipe clean with a soft, damp lawon. Pikeun noda anu bandel, anggo larutan sabun anu hampang teras langsung usap nepi ka garing. Hindarkeun bahan kimia anu keras atanapi pembersih anu abrasif.
- Pamariksaan: Périodik pariksa sagala screws na bolts pikeun mastikeun aranjeunna kedap. Retighten lamun perlu.
- Pindah: Nalika mindahkeun korsi, angkat heula ulah disered pikeun nyegah karusakan kana roda atanapi dasarna.
- Lingkungan: Avoid prolonged exposure to direct sunlight or extreme temperatures, which can damage the faux leather.
5. Cara ngungkulan
Upami anjeun ngalaman masalah sareng korsi anjeun, tingali masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Korsi teu stabil atanapi oyag. | Sekrup kendor atanapi pemasanganna teu leres. | Check and tighten all screws, especially those connecting the seat to the mechanism and the armrests. Ensure the gas lift is fully inserted into the base. |
| Pangaluyuan jangkungna korsi teu tiasa dianggo. | Gagalna angkat gas atanapi tuas henteu aktip. | Pastikeun tuasna ditarik ka luhur. Upami masalahna terus-terusan, lift gas panginten kedah digentos. Hubungi dukungan palanggan. |
| Korsi ngagorowok. | Sambungan leupas atawa gesekan antara bagian. | Kencengkeun sadaya sekrup. Oleskeun saeutik pelumas silikon kana bagian anu obah atanapi titik sambungan upami diperyogikeun. |
| Casters teu rolling mulus. | Runtah dina roda atawa roda nu ruksak. | Bersihkeun bulu atanapi kokotor tina roda kastor. Upami ruksak, roda kastor panginten kedah digentos. |
6. Spésifikasi
Detailed technical specifications for the Yaheetech YAexj20001 office chair:
- model: YAexj20001
- Bahan: PU leather, Foam, Metal, Nylon, Plywood, PP
- warna: Bodas
- Gemblengna Dimensi: 69 cm L × 71 cm W × 106-116 cm H (27.17 x 27.17 x 45.67 inches)
- Jangkungna korsi: 48-58 cm (adjustable)
- Ukuran korsi: 51 cm L x 50.5 cm D (20 x 19.88 inches)
- Armrest Height (from ground): 66.5-76.5 cm
- Kapasitas Beban Maksimum: 136 kg (300 lbs)
- Beurat bersih: 14.1 kg (31.4 lbs)
- Bahan pigura: logam
- Gas Mechanism: SGS certified heavy-duty gas lift
Gambar: Detailed diagram illustrating the dimensions of the Yaheetech office chair, including overall height, seat height, seat width, seat depth, and armrest height, along with the maximum load capacity of 136 kg.
Gambar: Ngabeledug view highlighting key features such as water-repellent faux leather, padded headrest, padded armrests, thick seat cushion, smooth-rolling casters, and solid gas spring.
7. Garansi jeung Rojongan
For warranty information or customer support, please refer to the purchase documentation or contact Yaheetech directly through their official websitus atanapi pangecér dimana produkna dibeuli.
Yaheetech Official Websitus: Visit Yaheetech Store on Amazon
