Bubuka
The DOREMiDi FC-3 MIDI Foot Controller is a versatile device designed for foot control in musical applications. It features USB HOST, USB Device, and MIDI DIN interfaces, allowing for flexible connectivity with various musical instruments and computer systems. The FC-3 is equipped with three configurable switch pedals and supports the connection of positive and negative expression pedals, providing comprehensive control over MIDI messages.
Fitur konci
- Integrated USB HOST, USB Device, and MIDI DIN interfaces for broad compatibility.
- Supports connection of positive and negative expression pedals, which are configurable.
- Features three configurable switch pedals for various control needs.
- Switch pedals offer Single, Toggle, Reset, and Increase/Decrease modes.
- Each pedal is capable of editing up to 16 different MIDI messages.
Disetél
Sambungan fisik
Before operating the FC-3, ensure all necessary connections are made securely. Refer to the diagrams below for proper port identification and cable connection.
Gambar 1: Tukangeun view of the FC-3 with connected cables. This image shows the DC IN 5V-12V port, USB DEVICE port, USB HOST port, MIDI OUT port, and 4/EXP (Expression Pedal) input.
Gambar 2: Sisi view of the FC-3 with cables connected, providing a clearer view of the port labels and cable types.
Figure 3: Top panel diagram of the FC-3, highlighting key components and their functions. (1) DC IN 5V-12V, (2) USB DEVICE, (3) USB HOST, (4) MIDI OUT, (5) 4/EXP (Expression Pedal), (6) Pedal 1/-, (7) Pedal 3/+, (8) Pedal 2/Shift, (9) Display Screen.
- Sambungan Daya: Connect the provided power adapter or a compatible 5V-12V DC power supply to the "DC IN 5V-12V" port. Note that the power input uses reverse polarity compared to some other pedals; use the provided adapter or cable.
- Sambungan Alat USB: Use a USB cable to connect the "USB DEVICE" port to your computer. This allows the FC-3 to function as a MIDI input device for your computer.
- USB Host Connection: Connect MIDI devices with a USB MIDI interface to the "USB HOST" port.
- MIDI DIN Connection: Connect devices with a traditional MIDI IN port to the "MIDI OUT" port using a standard MIDI cable.
- Expression Pedal Connection: Connect a positive or negative expression pedal to the "4/EXP" input for continuous control.
Persiapan Parangkat Lunak
For computer connectivity, a separate virtual COM driver may be required for Windows operating systems. This driver allows your computer to recognize the FC-3 as a MIDI input device. Refer to the manufacturer's website for the latest drivers compatible with your operating system (e.g., Windows 10 or 7). It is recommended to install the driver before connecting the FC-3 to your computer via the USB Device port.
The FC-3 is compatible with various software applications, including Ableton Live, Avid Pro Tools, and FL Studio.
Operasi
The DOREMiDi FC-3 offers extensive customization for its three switch pedals and expression pedal input. Understanding the different modes and programming capabilities is key to utilizing its full potential.
Figure 4: Operational overview of the FC-3, showing USB Device connection to computer, USB Host connection, MIDI DIN output, and the display interface for editing switch pedal and expression pedal parameters.
Switch Pedal Modes
The three switch pedals (labeled 1/-, 2/Shift, and 3/+) can be configured to operate in several modes:
- Tunggal: Sends a single MIDI message upon press.
- Togol: Alternates between two MIDI messages (e.g., on/off) with successive presses.
- Reset: Ngareset parameter kana nilai standar.
- Nambahkeun / Ngurangan: Increments or decrements a MIDI control change value.
MIDI Message Editing
Each of the three switch pedals and the expression pedal input can be programmed to send up to 16 different MIDI messages. This allows for complex control setups. The device supports editing up to 16 x 3 switch pedals + 16 expression pedals, referring to the number of programmable "banks" or sets of messages.
To program the pedals, connect the FC-3 to your computer via the USB Device port and use the dedicated editor software. The software allows you to assign specific MIDI messages (e.g., Program Change, Control Change, Note On/Off) to each pedal and configure their behavior.
Ngalihkeun Bank
The FC-3 organizes its MIDI messages into 16 banks. To switch between these banks:
- To move to a lower bank, simultaneously press pedals 1 and 2.
- To move to a higher bank, simultaneously press pedals 2 and 3.
The current bank number is displayed on the FC-3's screen. While the display is compact, it indicates the active bank for reference.
Pangropéa
To ensure the longevity and optimal performance of your DOREMiDi FC-3 MIDI Foot Controller, follow these maintenance guidelines:
- beberesih: Use a soft, dry cloth to clean the exterior of the device. Avoid using abrasive cleaners, solvents, or strong chemicals, as they may damage the finish or internal components.
- Panyimpenan: When not in use, store the FC-3 in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Penanganan: Handle the device with care. Avoid dropping it or subjecting it to strong impacts, which could damage the internal circuitry or external casing.
- Sasayogian tanaga: Always use the provided power adapter or a compatible power supply with the correct voltage and polarity. Incorrect power supplies can cause damage.
- Manajemén Kabel: Ensure cables are not excessively bent or tangled, which can lead to damage over time. Disconnect cables by pulling the plug, not the cable itself.
Pamérésan masalah
This section addresses common issues you might encounter with your DOREMiDi FC-3 MIDI Foot Controller.
| Masalah | Mungkin Cukang lantaranana / Solusi |
|---|---|
| Device not recognized by computer (Windows) |
|
| Pedal randomly switches modes (e.g., CC to Patch Change) |
|
| Latency issues with MIDI messages |
|
| Difficulty programming pedals / Editor software issues |
|
| Teu aya daya / Alat teu hurung |
|
spésifikasi
| Atribut | Rincian |
|---|---|
| merek | DOREMiDi |
| Ngaran modél | FC-3 |
| Nomer Modél Item | FC-3 |
| Téhnologi konektipitas | USB |
| Jumlah Konci/Pedal | 3 (Switch Pedals) |
| Platform hardware | PC |
| Gaya Musik | Éléktronik |
| Jenis Bahan | alumunium |
| Software Dirojong | Ableton Live, Avid Pro Tools, FL Studio |
| Panganteur Hardware | USB |
| Tipe Panyambung | USB |
| Alat nu cocog | Computers with USB ports running Windows 10 or 7 |
| Ngaran Warna | HIDEUNG |
| Item Beurat | 12.6 ons |
| Ukuran Paket | 6.1 x 4.02 x 2.44 inci |
| Tanggal Kahiji Sadia | 10 Méi 2023 |
Garansi sareng Rojongan
For warranty information, technical support, or service inquiries regarding your DOREMiDi FC-3 MIDI Foot Controller, please refer to the official DOREMiDi website or contact their customer support directly. Details regarding specific warranty periods and support channels are typically provided with your product purchase or on the manufacturer's official resources.
It is recommended to register your product, if applicable, to receive updates and facilitate support processes.
